[PATCH] arm64: dts: qcom: sm8250: use dt-bindings defines for clocks

[Jonathan Marek]

Use the dt-bindings defines for qupv3_id_1 node's clocks.

Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 9c210fbac65e..04c9c215ffcd 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -292,7 +292,8 @@ qupv3_id_1: geniqup@ac0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x00ac0000 0x0 0x6000>;
 			clock-names = "m-ahb", "s-ahb";
-			clocks = <&gcc 133>, <&gcc 134>;
+			clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+				 <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -302,7 +303,7 @@ uart2: serial@a90000 {
 				compatible = "qcom,geni-debug-uart";
 				reg = <0x0 0x00a90000 0x0 0x4000>;
 				clock-names = "se";
-				clocks = <&gcc 113>;
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
-- 
2.26.1