[PATCH V5 4/5] iio: adc: Update debug prints

From: Jishnu Prakash
Date: Fri May 22 2020 - 10:25:39 EST


Change pr_err/pr_debug statements to dev_err/dev_dbg for
increased clarity.

Signed-off-by: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
---
drivers/iio/adc/qcom-spmi-adc5.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index e1482fd..11eb97c 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -249,11 +249,11 @@ static int adc5_read_voltage_data(struct adc5_chip *adc, u16 *data)
*data = (rslt_msb << 8) | rslt_lsb;

if (*data == ADC5_USR_DATA_CHECK) {
- pr_err("Invalid data:0x%x\n", *data);
+ dev_err(adc->dev, "Invalid data:0x%x\n", *data);
return -EINVAL;
}

- pr_debug("voltage raw code:0x%x\n", *data);
+ dev_dbg(adc->dev, "voltage raw code:0x%x\n", *data);

return 0;
}
@@ -385,24 +385,24 @@ static int adc5_do_conversion(struct adc5_chip *adc,

ret = adc5_configure(adc, prop);
if (ret) {
- pr_err("ADC configure failed with %d\n", ret);
+ dev_err(adc->dev, "ADC configure failed with %d\n", ret);
goto unlock;
}

if (adc->poll_eoc) {
ret = adc5_poll_wait_eoc(adc);
if (ret) {
- pr_err("EOC bit not set\n");
+ dev_err(adc->dev, "EOC bit not set\n");
goto unlock;
}
} else {
ret = wait_for_completion_timeout(&adc->complete,
ADC5_CONV_TIMEOUT);
if (!ret) {
- pr_debug("Did not get completion timeout.\n");
+ dev_dbg(adc->dev, "Did not get completion timeout.\n");
ret = adc5_poll_wait_eoc(adc);
if (ret) {
- pr_err("EOC bit not set\n");
+ dev_err(adc->dev, "EOC bit not set\n");
goto unlock;
}
}
@@ -724,7 +724,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
channel_name = of_get_property(node,
"label", NULL) ? : node->name;
if (!channel_name) {
- pr_err("Invalid channel name\n");
+ dev_err(dev, "Invalid channel name\n");
return -EINVAL;
}
prop->datasheet_name = channel_name;
@@ -767,7 +767,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
return ret;
}

- pr_debug("dig_ver:minor:%d, major:%d\n", dig_version[0],
+ dev_dbg(dev, "dig_ver:minor:%d, major:%d\n", dig_version[0],
dig_version[1]);
/* Digital controller >= 5.3 have hw_settle_2 option */
if ((dig_version[0] >= ADC5_HW_SETTLE_DIFF_MINOR &&
@@ -971,7 +971,7 @@ static int adc5_probe(struct platform_device *pdev)

ret = adc5_get_dt_data(adc, node);
if (ret) {
- pr_err("adc get dt data failed\n");
+ dev_err(dev, "adc get dt data failed\n");
return ret;
}

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project