[PATCH V2 4/8] mmc: sdhci-msm: Update dll_config_3 as per HSR

From: Sarthak Garg
Date: Fri May 22 2020 - 05:37:54 EST


Update dll_config_3 as per the host clock frequency as specified in the
DLL Hardware Reference Guide.

Signed-off-by: Sarthak Garg <sartgarg@xxxxxxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
drivers/mmc/host/sdhci-msm.c | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 6588077..054b151 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -62,6 +62,9 @@
#define FINE_TUNE_MODE_EN BIT(27)
#define BIAS_OK_SIGNAL BIT(29)

+#define DLL_CONFIG_3_LOW_FREQ_VAL 0x08
+#define DLL_CONFIG_3_HIGH_FREQ_VAL 0x10
+
#define CORE_VENDOR_SPEC_POR_VAL 0xa9c
#define CORE_CLK_PWRSAVE BIT(1)
#define CORE_HC_MCLK_SEL_DFLT (2 << 8)
@@ -695,6 +698,16 @@ static int msm_init_cm_dll(struct sdhci_host *host)
ENABLE_DLL_LOCK_STATUS | BIAS_OK_SIGNAL;
writel_relaxed(config, host->ioaddr +
msm_offset->core_dll_usr_ctl);
+
+ config = readl_relaxed(host->ioaddr +
+ msm_offset->core_dll_config_3);
+ config &= ~0xFF;
+ if (msm_host->clk_rate < 150000000)
+ config |= DLL_CONFIG_3_LOW_FREQ_VAL;
+ else
+ config |= DLL_CONFIG_3_HIGH_FREQ_VAL;
+ writel_relaxed(config, host->ioaddr +
+ msm_offset->core_dll_config_3);
}

config = readl_relaxed(host->ioaddr +
--
2.7.4