Re: [PATCH v2 04/18] nitro_enclaves: Init PCI device driver

From: Greg KH
Date: Fri May 22 2020 - 03:04:24 EST


On Fri, May 22, 2020 at 09:29:32AM +0300, Andra Paraschiv wrote:
> +/**
> + * ne_setup_msix - Setup MSI-X vectors for the PCI device.
> + *
> + * @pdev: PCI device to setup the MSI-X for.
> + *
> + * @returns: 0 on success, negative return value on failure.
> + */
> +static int ne_setup_msix(struct pci_dev *pdev)
> +{
> + struct ne_pci_dev *ne_pci_dev = NULL;
> + int nr_vecs = 0;
> + int rc = -EINVAL;
> +
> + if (WARN_ON(!pdev))
> + return -EINVAL;

How can this ever happen? If it can not, don't test for it. If it can,
don't warn for it as that will crash systems that do panic-on-warn, just
test and return an error.

> +
> + ne_pci_dev = pci_get_drvdata(pdev);
> + if (WARN_ON(!ne_pci_dev))
> + return -EINVAL;

Same here, don't use WARN_ON if at all possible.

> +
> + nr_vecs = pci_msix_vec_count(pdev);
> + if (nr_vecs < 0) {
> + rc = nr_vecs;
> +
> + dev_err_ratelimited(&pdev->dev,
> + NE "Error in getting vec count [rc=%d]\n",
> + rc);
> +

Why ratelimited, can this happen over and over and over?

> + return rc;
> + }
> +
> + rc = pci_alloc_irq_vectors(pdev, nr_vecs, nr_vecs, PCI_IRQ_MSIX);
> + if (rc < 0) {
> + dev_err_ratelimited(&pdev->dev,
> + NE "Error in alloc MSI-X vecs [rc=%d]\n",
> + rc);

Same here.

> +
> + return rc;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * ne_teardown_msix - Teardown MSI-X vectors for the PCI device.
> + *
> + * @pdev: PCI device to teardown the MSI-X for.
> + */
> +static void ne_teardown_msix(struct pci_dev *pdev)
> +{
> + struct ne_pci_dev *ne_pci_dev = NULL;

=NULL not needed.

> +
> + if (WARN_ON(!pdev))
> + return;

Again, you control the callers, how can this ever be true?

> +
> + ne_pci_dev = pci_get_drvdata(pdev);
> + if (WARN_ON(!ne_pci_dev))
> + return;

Again, same thing. I'm just going to let you fix up all instances of
this pattern from now on and not call it out again.

> +
> + pci_free_irq_vectors(pdev);
> +}
> +
> +/**
> + * ne_pci_dev_enable - Select PCI device version and enable it.
> + *
> + * @pdev: PCI device to select version for and then enable.
> + *
> + * @returns: 0 on success, negative return value on failure.
> + */
> +static int ne_pci_dev_enable(struct pci_dev *pdev)
> +{
> + u8 dev_enable_reply = 0;
> + u16 dev_version_reply = 0;
> + struct ne_pci_dev *ne_pci_dev = NULL;
> +
> + if (WARN_ON(!pdev))
> + return -EINVAL;
> +
> + ne_pci_dev = pci_get_drvdata(pdev);
> + if (WARN_ON(!ne_pci_dev) || WARN_ON(!ne_pci_dev->iomem_base))
> + return -EINVAL;
> +
> + iowrite16(NE_VERSION_MAX, ne_pci_dev->iomem_base + NE_VERSION);
> +
> + dev_version_reply = ioread16(ne_pci_dev->iomem_base + NE_VERSION);
> + if (dev_version_reply != NE_VERSION_MAX) {
> + dev_err_ratelimited(&pdev->dev,
> + NE "Error in pci dev version cmd\n");

Same here, why all the ratelimited stuff? Should just be dev_err(),
right?

> +
> + return -EIO;
> + }
> +
> + iowrite8(NE_ENABLE_ON, ne_pci_dev->iomem_base + NE_ENABLE);
> +
> + dev_enable_reply = ioread8(ne_pci_dev->iomem_base + NE_ENABLE);
> + if (dev_enable_reply != NE_ENABLE_ON) {
> + dev_err_ratelimited(&pdev->dev,
> + NE "Error in pci dev enable cmd\n");
> +
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * ne_pci_dev_disable - Disable PCI device.
> + *
> + * @pdev: PCI device to disable.
> + */
> +static void ne_pci_dev_disable(struct pci_dev *pdev)
> +{
> + u8 dev_disable_reply = 0;
> + struct ne_pci_dev *ne_pci_dev = NULL;
> + const unsigned int sleep_time = 10; // 10 ms
> + unsigned int sleep_time_count = 0;
> +
> + if (WARN_ON(!pdev))
> + return;
> +
> + ne_pci_dev = pci_get_drvdata(pdev);
> + if (WARN_ON(!ne_pci_dev) || WARN_ON(!ne_pci_dev->iomem_base))
> + return;
> +
> + iowrite8(NE_ENABLE_OFF, ne_pci_dev->iomem_base + NE_ENABLE);
> +
> + /*
> + * Check for NE_ENABLE_OFF in a loop, to handle cases when the device
> + * state is not immediately set to disabled and going through a
> + * transitory state of disabling.
> + */
> + while (sleep_time_count < DEFAULT_TIMEOUT_MSECS) {
> + dev_disable_reply = ioread8(ne_pci_dev->iomem_base + NE_ENABLE);
> + if (dev_disable_reply == NE_ENABLE_OFF)
> + return;
> +
> + msleep_interruptible(sleep_time);
> + sleep_time_count += sleep_time;
> + }
> +
> + dev_disable_reply = ioread8(ne_pci_dev->iomem_base + NE_ENABLE);
> + if (dev_disable_reply != NE_ENABLE_OFF)
> + dev_err_ratelimited(&pdev->dev,
> + NE "Error in pci dev disable cmd\n");
> +}
> +
> +static int ne_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> +{
> + struct ne_pci_dev *ne_pci_dev = NULL;
> + int rc = -EINVAL;
> +
> + ne_pci_dev = kzalloc(sizeof(*ne_pci_dev), GFP_KERNEL);
> + if (!ne_pci_dev)
> + return -ENOMEM;
> +
> + rc = pci_enable_device(pdev);
> + if (rc < 0) {
> + dev_err_ratelimited(&pdev->dev,
> + NE "Error in pci dev enable [rc=%d]\n", rc);
> +
> + goto free_ne_pci_dev;
> + }
> +
> + rc = pci_request_regions_exclusive(pdev, "ne_pci_dev");
> + if (rc < 0) {
> + dev_err_ratelimited(&pdev->dev,
> + NE "Error in pci request regions [rc=%d]\n",
> + rc);
> +
> + goto disable_pci_dev;
> + }
> +
> + ne_pci_dev->iomem_base = pci_iomap(pdev, PCI_BAR_NE, 0);
> + if (!ne_pci_dev->iomem_base) {
> + rc = -ENOMEM;
> +
> + dev_err_ratelimited(&pdev->dev,
> + NE "Error in pci iomap [rc=%d]\n", rc);
> +
> + goto release_pci_regions;
> + }
> +
> + pci_set_drvdata(pdev, ne_pci_dev);
> +
> + rc = ne_setup_msix(pdev);
> + if (rc < 0) {
> + dev_err_ratelimited(&pdev->dev,
> + NE "Error in pci dev msix setup [rc=%d]\n",
> + rc);
> +
> + goto iounmap_pci_bar;
> + }
> +
> + ne_pci_dev_disable(pdev);
> +
> + rc = ne_pci_dev_enable(pdev);
> + if (rc < 0) {
> + dev_err_ratelimited(&pdev->dev,
> + NE "Error in ne_pci_dev enable [rc=%d]\n",
> + rc);
> +
> + goto teardown_msix;
> + }
> +
> + atomic_set(&ne_pci_dev->cmd_reply_avail, 0);
> + init_waitqueue_head(&ne_pci_dev->cmd_reply_wait_q);
> + INIT_LIST_HEAD(&ne_pci_dev->enclaves_list);
> + mutex_init(&ne_pci_dev->enclaves_list_mutex);
> + mutex_init(&ne_pci_dev->pci_dev_mutex);
> +
> + return 0;
> +
> +teardown_msix:
> + ne_teardown_msix(pdev);
> +iounmap_pci_bar:
> + pci_set_drvdata(pdev, NULL);
> + pci_iounmap(pdev, ne_pci_dev->iomem_base);
> +release_pci_regions:
> + pci_release_regions(pdev);
> +disable_pci_dev:
> + pci_disable_device(pdev);
> +free_ne_pci_dev:
> + kzfree(ne_pci_dev);
> +
> + return rc;
> +}
> +
> +static void ne_pci_remove(struct pci_dev *pdev)
> +{
> + struct ne_pci_dev *ne_pci_dev = pci_get_drvdata(pdev);
> +
> + if (!ne_pci_dev || !ne_pci_dev->iomem_base)
> + return;
> +
> + ne_pci_dev_disable(pdev);
> +
> + ne_teardown_msix(pdev);
> +
> + pci_set_drvdata(pdev, NULL);
> +
> + pci_iounmap(pdev, ne_pci_dev->iomem_base);
> +
> + pci_release_regions(pdev);
> +
> + pci_disable_device(pdev);
> +
> + kzfree(ne_pci_dev);

Why kzfree()? It's a pci device structure? What "special" info was in
it?

thanks,

greg k-h