[PATCH v2 7/9] dt-bindings: spi: Convert spi-pxa2xx to json-schema

From: Lubomir Rintel
Date: Thu May 21 2020 - 05:14:16 EST


A straightforward conversion of the the spi-pxa2xx binding to DT schema
format using json-schema.

Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>

---
Changes since v1:
- Drop #address-cells and #size-cells
- s/GPL-2.0-or-later/GPL-2.0-only/

.../bindings/spi/marvell,mmp2-ssp.yaml | 56 +++++++++++++++++++
.../devicetree/bindings/spi/spi-pxa2xx.txt | 27 ---------
2 files changed, 56 insertions(+), 27 deletions(-)
create mode 100644 Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
delete mode 100644 Documentation/devicetree/bindings/spi/spi-pxa2xx.txt

diff --git a/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
new file mode 100644
index 000000000000..09bd831250a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/marvell,mmp2-ssp.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019,2020 Lubomir Rintel <lkundrak@xxxxx>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/marvell,mmp2-ssp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PXA2xx SSP SPI Controller bindings
+
+maintainers:
+ - Lubomir Rintel <lkundrak@xxxxx>
+
+allOf:
+ - $ref: spi-controller.yaml#
+
+properties:
+ compatible:
+ const: marvell,mmp2-ssp
+
+ interrupts:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ ready-gpios:
+ description: |
+ GPIO used to signal a SPI master that the FIFO is filled and we're
+ ready to service a transfer. Only useful in slave mode.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+dependencies:
+ ready-gpios: [ spi-slave ]
+
+examples:
+ - |
+ #include <dt-bindings/clock/marvell,mmp2.h>
+ spi@d4035000 {
+ compatible = "marvell,mmp2-ssp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xd4035000 0x1000>;
+ clocks = <&soc_clocks MMP2_CLK_SSP0>;
+ interrupts = <0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt b/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
deleted file mode 100644
index e30e0c2a4bce..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-pxa2xx.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-PXA2xx SSP SPI Controller
-
-Required properties:
-- compatible: Must be "marvell,mmp2-ssp".
-- reg: Offset and length of the device's register set.
-- interrupts: Should be the interrupt number.
-- clocks: Should contain a single entry describing the clock input.
-- #address-cells: Number of cells required to define a chip select address.
-- #size-cells: Should be zero.
-
-Optional properties:
-- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
- Documentation/devicetree/bindings/spi/spi-bus.txt
-- spi-slave: Empty property indicating the SPI controller is used in slave mode.
-- ready-gpios: GPIO used to signal a SPI master that the FIFO is filled
- and we're ready to service a transfer. Only useful in slave mode.
-
-Child nodes represent devices on the SPI bus
- See ../spi/spi-bus.txt
-
-Example:
- ssp1: spi@d4035000 {
- compatible = "marvell,mmp2-ssp";
- reg = <0xd4035000 0x1000>;
- clocks = <&soc_clocks MMP2_CLK_SSP0>;
- interrupts = <0>;
- };
--
2.26.2