Re: [PATCH 00/13] Reconcile NUMA balancing decisions with the load balancer v6

From: Jirka Hladky
Date: Wed May 20 2020 - 09:58:22 EST


Hi Hillf, Mel and all,

thanks for the patch! It has produced really GOOD results.

1) It has fixed performance problems with 5.7 vanilla kernel for
single-tenant workload and low system load scenarios, without
performance degradation for the multi-tenant tasks. It's producing the
same results as the previous proof-of-concept patch where
adjust_numa_imbalance function was modified to be a no-op (returning
the same value of imbalance as it gets on the input).

2) We have also added Mel's netperf-cstate-small-cross-socket test to
our test battery:
https://github.com/gormanm/mmtests/blob/master/configs/config-network-netperf-cstate-small-cross-socket

Mel told me that he had seen significant performance improvements with
5.7 over 5.6 for the netperf-cstate-small-cross-socket scenario.

Out of 6 different patches we have tested, your patch has performed
the best for this scenario. Compared to vanilla, we see minimal
performance degradation of 2.5% for the udp stream throughput and 0.6%
for the tcp throughput. The testing was done on a dual-socket system
with Gold 6132 CPU.

@Mel - could you please test Hillf's patch with your full testing
suite? So far, it looks very promising, but I would like to check the
patch thoroughly to make sure it does not hurt performance in other
areas.

Thanks a lot!
Jirka












On Tue, May 19, 2020 at 6:32 AM Hillf Danton <hdanton@xxxxxxxx> wrote:
>
>
> Hi Jirka
>
> On Mon, 18 May 2020 16:52:52 +0200 Jirka Hladky wrote:
> >
> > We have compared it against kernel with adjust_numa_imbalance disabled
> > [1], and both kernels perform at the same level for the single-tenant
> > jobs, but the proposed patch is bad for the multitenancy mode. The
> > kernel with adjust_numa_imbalance disabled is a clear winner here.
>
> Double thanks to you for the tests!
>
> > We would be very interested in what others think about disabling
> > adjust_numa_imbalance function. The patch is bellow. It would be great
>
> A minute...
>
> > to collect performance results for different scenarios to make sure
> > the results are objective.
>
> I don't have another test case but a diff trying to confine the tool
> in question back to the hard-coded 2's field.
>
> It's used in the first hunk below to detect imbalance before migrating
> a task, and a small churn of code is added at another call site when
> balancing idle CPUs.
>
> Thanks
> Hillf
>
> --- a/kernel/sched/fair.c
> +++ b/kernel/sched/fair.c
> @@ -1916,20 +1916,26 @@ static void task_numa_find_cpu(struct ta
> * imbalance that would be overruled by the load balancer.
> */
> if (env->dst_stats.node_type == node_has_spare) {
> - unsigned int imbalance;
> - int src_running, dst_running;
> + unsigned int imbalance = 2;
>
> - /*
> - * Would movement cause an imbalance? Note that if src has
> - * more running tasks that the imbalance is ignored as the
> - * move improves the imbalance from the perspective of the
> - * CPU load balancer.
> - * */
> - src_running = env->src_stats.nr_running - 1;
> - dst_running = env->dst_stats.nr_running + 1;
> - imbalance = max(0, dst_running - src_running);
> - imbalance = adjust_numa_imbalance(imbalance, src_running);
> + //No imbalance computed without spare capacity
> + if (env->dst_stats.node_type != env->src_stats.node_type)
> + goto check_imb;
> +
> + imbalance = adjust_numa_imbalance(imbalance,
> + env->src_stats.nr_running);
> +
> + //Do nothing without imbalance
> + if (!imbalance) {
> + imbalance = 2;
> + goto check_imb;
> + }
> +
> + //Migrate task if it's likely to grow balance
> + if (env->dst_stats.nr_running + 1 < env->src_stats.nr_running)
> + imbalance = 0;
>
> +check_imb:
> /* Use idle CPU if there is no imbalance */
> if (!imbalance) {
> maymove = true;
> @@ -9011,12 +9017,13 @@ static inline void calculate_imbalance(s
> env->migration_type = migrate_task;
> env->imbalance = max_t(long, 0, (local->idle_cpus -
> busiest->idle_cpus) >> 1);
> - }
>
> - /* Consider allowing a small imbalance between NUMA groups */
> - if (env->sd->flags & SD_NUMA)
> - env->imbalance = adjust_numa_imbalance(env->imbalance,
> - busiest->sum_nr_running);
> + /* Consider allowing a small imbalance between NUMA groups */
> + if (env->sd->flags & SD_NUMA &&
> + local->group_type == busiest->group_type)
> + env->imbalance = adjust_numa_imbalance(env->imbalance,
> + busiest->sum_nr_running);
> + }
>
> return;
> }
> --
>


--
-Jirka