Re: [PATCH v3 5/5] serial: 8250_dw: add em485 support

[Andy Shevchenko]

On Sun, May 17, 2020 at 11:56:10PM +0200, Heiko Stuebner wrote:
> From: Giulio Benetti <giulio.benetti@xxxxxxxxxxxxxxxx>
> 
> Need to use rs485 transceiver so let's use existing em485 485 emulation
> layer on top of 8250.
> 
> Add rs485_config callback to port and uses the standard em485 start and
> stop helpers.

Would it prevent to use native RS485 support?

...

>  	p->serial_out	= dw8250_serial_out;
>  	p->set_ldisc	= dw8250_set_ldisc;
>  	p->set_termios	= dw8250_set_termios;
> +	p->rs485_config = serial8250_em485_config;
> +	up->rs485_start_tx = serial8250_em485_start_tx;
> +	up->rs485_stop_tx = serial8250_em485_stop_tx;

-- 
With Best Regards,
Andy Shevchenko