Re: [PATCH 28/28] dt-bindings: usb: Convert ehci-mv to json-schema

From: Lubomir Rintel
Date: Sun May 17 2020 - 15:34:59 EST


On Fri, Mar 27, 2020 at 01:55:20PM -0600, Rob Herring wrote:
> On Tue, Mar 17, 2020 at 10:39:22AM +0100, Lubomir Rintel wrote:
> > A straightforward conversion of the ehci-mv binding to DT schema format
> > using json-schema.
> >
> > Signed-off-by: Lubomir Rintel <lkundrak@xxxxx>
> > ---
> > .../devicetree/bindings/usb/ehci-mv.txt | 23 -------
> > .../bindings/usb/marvell,pxau2o-ehci.yaml | 60 +++++++++++++++++++
> > 2 files changed, 60 insertions(+), 23 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/usb/ehci-mv.txt
> > create mode 100644 Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/usb/ehci-mv.txt b/Documentation/devicetree/bindings/usb/ehci-mv.txt
> > deleted file mode 100644
> > index 335589895763e..0000000000000
> > --- a/Documentation/devicetree/bindings/usb/ehci-mv.txt
> > +++ /dev/null
> > @@ -1,23 +0,0 @@
> > -* Marvell PXA/MMP EHCI controller.
> > -
> > -Required properties:
> > -
> > -- compatible: must be "marvell,pxau2o-ehci"
> > -- reg: physical base addresses of the controller and length of memory mapped region
> > -- interrupts: one EHCI controller interrupt should be described here
> > -- clocks: phandle list of usb clocks
> > -- clock-names: should be "USBCLK"
> > -- phys: phandle for the PHY device
> > -- phy-names: should be "usb"
> > -
> > -Example:
> > -
> > - ehci0: usb-ehci@d4208000 {
> > - compatible = "marvell,pxau2o-ehci";
> > - reg = <0xd4208000 0x200>;
> > - interrupts = <44>;
> > - clocks = <&soc_clocks MMP2_CLK_USB>;
> > - clock-names = "USBCLK";
> > - phys = <&usb_otg_phy>;
> > - phy-names = "usb";
> > - };
> > diff --git a/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
> > new file mode 100644
> > index 0000000000000..189025ef1e92e
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/usb/marvell,pxau2o-ehci.yaml
> > @@ -0,0 +1,60 @@
> > +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
>
> Same license comment.

I wrote that binding document and chose that license.

> > +# Copyright 2019,2020 Lubomir Rintel <lkundrak@xxxxx>
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/usb/marvell,pxau2o-ehci.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Marvell PXA/MMP EHCI bindings
> > +
> > +maintainers:
> > + - Lubomir Rintel <lkundrak@xxxxx>
> > +
> > +allOf:
> > + - $ref: usb-hcd.yaml#
> > +
> > +properties:
> > + compatible:
> > + const: marvell,pxau2o-ehci
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + maxItems: 1
> > +
> > + clock-names:
> > + const: USBCLK
> > +
> > + phys:
> > + maxItems: 1
> > +
> > + phy-names:
> > + const: usb
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - clocks
> > + - clock-names
> > + - phys
> > + - phy-names
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/marvell,mmp2.h>
> > + usb@d4208000 {
> > + compatible = "marvell,pxau2o-ehci";
> > + reg = <0xd4208000 0x200>;
> > + interrupts = <44>;
> > + clocks = <&soc_clocks MMP2_CLK_USB>;
> > + clock-names = "USBCLK";
> > + phys = <&usb_otg_phy>;
> > + phy-names = "usb";
> > + };
> > +
> > +...
> > --
> > 2.25.1
> >