[PATCH v2 1/4] dt-bindings: bus: Add Baikal-T1 AXI-bus binding

From: Serge Semin
Date: Thu May 07 2020 - 18:41:47 EST


AXI3-bus is the main communication bus connecting all high-speed
peripheral IP-cores with RAM controller and with MIPS P5600 cores on
Baikal-T1 SoC. This binding describes the DW AMBA 3 AXI Inteconnect
and Errors Handler Block synthesized on top of it, which are
responsible for the AXI-bus traffic arbitration and errors reporting
upstream to CPU. Baikal-T1 AXI-bus DT node is supposed to be compatible
with "be,bt1-axi" and "simple-bus" drivers, should have reg property with
AXI-bus QOS registers space, syscon phandle reference to the Baikal-T1
System Controller, IRQ line declared, AXI Interconnect reference clock and
reset line.

Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Cc: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
Cc: Paul Burton <paulburton@xxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
Cc: Tero Kristo <t-kristo@xxxxxx>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
Cc: Jeffrey Hugo <jhugo@xxxxxxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Olof Johansson <olof@xxxxxxxxx>
Cc: linux-mips@xxxxxxxxxxxxxxx
Cc: soc@xxxxxxxxxx

---

Rob, I had to remove your Reviewed-by tag, since new changes had been
introduced.

Changelog v2:
- Move driver to the bus subsystem.
- Use dual GPL/BSD license.
- Use single lined copyright header.
- Lowercase the unit-address.
- Convert a simple EHB block binding to the Baikal-T1 AXI-bus one with
interconnect capabilities support.
- Replace "additionalProperties: false" property with
"unevaluatedProperties: false".
- Add AXI reference clock and reset support.
- Add syscon phandle reference to the Baikal-T1 System Controller node.
---
.../bindings/bus/baikal,bt1-axi.yaml | 95 +++++++++++++++++++
1 file changed, 95 insertions(+)
create mode 100644 Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml

diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
new file mode 100644
index 000000000000..082ab5c3b4f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/baikal,bt1-axi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 AXI-bus
+
+maintainers:
+ - Serge Semin <fancer.lancer@xxxxxxxxx>
+
+description: |
+ AXI3-bus is the main communication bus of Baikal-T1 SoC connecting all
+ high-speed peripheral IP-cores with RAM controller and with MIPS P5600
+ cores. Traffic arbitration is done by means of DW AXI Interconnect (so
+ called AXI Main Interconnect) routing IO requests from one block to
+ another: from CPU to SoC peripherals and between some SoC peripherals
+ (mostly between peripheral devices and RAM, but also between DMA and
+ some peripherals). In case of any protocol error, device not responding
+ an IRQ is raised and a faulty situation is reported to the AXI EHB
+ (Errors Handler Block) embedded on top of the DW AXI Interconnect and
+ accessible by means of the Baikal-T1 System Controller.
+
+allOf:
+ - $ref: /schemas/simple-bus.yaml#
+
+properties:
+ compatible:
+ contains:
+ const: baikal,bt1-axi
+
+ reg:
+ maxItems: 1
+
+ '#interconnect-cells':
+ const: 1
+
+ syscon:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description: Phandle to the Baikal-T1 System Controller DT node
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Main Interconnect uplink reference clock
+
+ clock-names:
+ items:
+ - const: aclk
+
+ resets:
+ items:
+ - description: Main Interconnect reset line
+
+ reset-names:
+ items:
+ - const: arst
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - syscon
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+ bus@1f05a000 {
+ compatible = "baikal,bt1-axi", "simple-bus";
+ reg = <0 0x1f05a000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interconnect-cells = <1>;
+
+ syscon = <&syscon>;
+
+ ranges;
+
+ interrupts = <GIC_SHARED 127 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&ccu_axi 0>;
+ clock-names = "aclk";
+
+ resets = <&ccu_axi 0>;
+ reset-names = "arst";
+ };
+...
--
2.25.1