RE: [PATCH v3 1/2] PCI: hv: Fix the PCI HyperV probe failure path to release resource properly

From: Michael Kelley
Date: Thu May 07 2020 - 10:32:44 EST


From: Wei Hu <weh@xxxxxxxxxxxxx> Sent: Wednesday, May 6, 2020 10:02 PM
>
> In some error cases in hv_pci_probe(), allocated resources are not freed.
> Fix this by adding a field to keep track of the high water mark for slots
> that have resources allocated to them. In case of an error, this high
> water mark is used to know which slots have resources that must be released.
> Since slots are numbered starting with zero, a value of -1 indicates no
> slots have been allocated resources. There may be unused slots in the range
> between slot 0 and the high water mark slot, but these slots are already
> ignored by the existing code in the allocate and release loops with the call
> to get_pcichild_wslot().
>
> Signed-off-by: Wei Hu <weh@xxxxxxxxxxxxx>
> ---
> v3: Add detailed explanation of this patch in commit log per Lorenzo
> Pieralisi's suggestions.
>
> drivers/pci/controller/pci-hyperv.c | 20 ++++++++++++++++----
> 1 file changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
> index e15022ff63e3..e6fac0187722 100644
> --- a/drivers/pci/controller/pci-hyperv.c
> +++ b/drivers/pci/controller/pci-hyperv.c
> @@ -480,6 +480,9 @@ struct hv_pcibus_device {
>
> struct workqueue_struct *wq;
>
> + /* Highest slot of child device with resources allocated */
> + int wslot_res_allocated;
> +
> /* hypercall arg, must not cross page boundary */
> struct hv_retarget_device_interrupt retarget_msi_interrupt_params;
>
> @@ -2847,7 +2850,7 @@ static int hv_send_resources_allocated(struct hv_device *hdev)
> struct hv_pci_dev *hpdev;
> struct pci_packet *pkt;
> size_t size_res;
> - u32 wslot;
> + int wslot;
> int ret;
>
> size_res = (hbus->protocol_version < PCI_PROTOCOL_VERSION_1_2)
> @@ -2900,6 +2903,8 @@ static int hv_send_resources_allocated(struct hv_device *hdev)
> comp_pkt.completion_status);
> break;
> }
> +
> + hbus->wslot_res_allocated = wslot;
> }
>
> kfree(pkt);
> @@ -2918,10 +2923,10 @@ static int hv_send_resources_released(struct hv_device *hdev)
> struct hv_pcibus_device *hbus = hv_get_drvdata(hdev);
> struct pci_child_message pkt;
> struct hv_pci_dev *hpdev;
> - u32 wslot;
> + int wslot;
> int ret;
>
> - for (wslot = 0; wslot < 256; wslot++) {
> + for (wslot = hbus->wslot_res_allocated; wslot >= 0; wslot--) {
> hpdev = get_pcichild_wslot(hbus, wslot);
> if (!hpdev)
> continue;
> @@ -2936,8 +2941,12 @@ static int hv_send_resources_released(struct hv_device *hdev)
> VM_PKT_DATA_INBAND, 0);
> if (ret)
> return ret;
> +
> + hbus->wslot_res_allocated = wslot - 1;
> }
>
> + hbus->wslot_res_allocated = -1;
> +
> return 0;
> }
>
> @@ -3037,6 +3046,7 @@ static int hv_pci_probe(struct hv_device *hdev,
> if (!hbus)
> return -ENOMEM;
> hbus->state = hv_pcibus_init;
> + hbus->wslot_res_allocated = -1;
>
> /*
> * The PCI bus "domain" is what is called "segment" in ACPI and other
> @@ -3136,7 +3146,7 @@ static int hv_pci_probe(struct hv_device *hdev,
>
> ret = hv_pci_allocate_bridge_windows(hbus);
> if (ret)
> - goto free_irq_domain;
> + goto exit_d0;
>
> ret = hv_send_resources_allocated(hdev);
> if (ret)
> @@ -3154,6 +3164,8 @@ static int hv_pci_probe(struct hv_device *hdev,
>
> free_windows:
> hv_pci_free_bridge_windows(hbus);
> +exit_d0:
> + (void) hv_pci_bus_exit(hdev, true);
> free_irq_domain:
> irq_domain_remove(hbus->irq_domain);
> free_fwnode:
> --
> 2.20.1

Reviewed-by: Michael Kelley <mikelley@xxxxxxxxxxxxx>