Re: [PATCH v7 2/3] phy: zynqmp: Add PHY driver for the Xilinx ZynqMP Gigabit Transceiver

From: Kishon Vijay Abraham I
Date: Thu May 07 2020 - 00:44:57 EST


+Vinod

Hi,

On 4/2/2020 3:40 AM, Laurent Pinchart wrote:
> From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx>
>
> Xilinx ZynqMP SoCs have a Gigabit Transceiver with four lanes. All the
> high speed peripherals such as USB, SATA, PCIE, Display Port and
> Ethernet SGMII can rely on any of the four GT lanes for PHY layer. This
> patch adds driver for that ZynqMP GT core.
>
> Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> Changes since v5:
>
> - Cleanup headers
> - Organize the code in sections
> - Constify data tables and structures
> - Allocate all PHY instances in one go
> - Add I/O accessors
> - Move DP-specific init to a separate function
> - Use devm_platform_ioremap_resource_byname()
> - Simplify acquisition of reset controllers
> - Implement .configure() PHY operation for DP
> - Implement .power_on() and .power_off() operations
> - Wait for PLL lock for DP PHY too
> - Remove USB core reset operations
> - Fix SGMII bus width settings
> - Update copyright notice and authors list
> - Disable error messages on probe deferral
> - Update reset names to new DT bindings
> - Update to removal of subnodes in new DT bindings
> - Handle reference clocks through CCF
> - Add MAINTAINERS entry
> - Drop reset handling
> - Split TX term fix to separate function
> - Remove unused registers
> ---
> MAINTAINERS | 9 +
> drivers/phy/Kconfig | 8 +
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-zynqmp.c | 995 +++++++++++++++++++++++++++++++++++++++

Better to add a xilinx directory for this driver.
> 4 files changed, 1013 insertions(+)
> create mode 100644 drivers/phy/phy-zynqmp.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 07293073c4f6..19e630fcaf62 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -18406,6 +18406,15 @@ F: Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.yaml
> F: drivers/dma/xilinx/xilinx_dpdma.c
> F: include/dt-bindings/dma/xlnx-zynqmp-dpdma.h
>
> +XILINX ZYNQMP GSPTR PHY DRIVER

Looks like a typo here, rest of the place seems to use PSGTR
> +M: Anurag Kumar Vulisha <anurag.kumar.vulisha@xxxxxxxxxx>
> +M: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> +L: linux-kernel@xxxxxxxxxxxxxxx
> +T: git https://github.com/Xilinx/linux-xlnx.git
> +S: Supported
> +F: Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
> +F: drivers/phy/phy-zynqmp.c
> +
> XILLYBUS DRIVER
> M: Eli Billauer <eli.billauer@xxxxxxxxx>
> L: linux-kernel@xxxxxxxxxxxxxxx
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index b3ed94b98d9b..b8251b9f3d87 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -49,6 +49,14 @@ config PHY_XGENE
> help
> This option enables support for APM X-Gene SoC multi-purpose PHY.
>
> +config PHY_XILINX_ZYNQMP
> + tristate "Xilinx ZynqMP PHY driver"
> + depends on ARCH_ZYNQMP
> + select GENERIC_PHY
> + help
> + Enable this to support ZynqMP High Speed Gigabit Transceiver
> + that is part of ZynqMP SoC.
> +
> source "drivers/phy/allwinner/Kconfig"
> source "drivers/phy/amlogic/Kconfig"
> source "drivers/phy/broadcom/Kconfig"
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 310c149a9df5..5dc7469f078b 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o
> obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
> obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
> obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
> +obj-$(CONFIG_PHY_XILINX_ZYNQMP) += phy-zynqmp.o
> obj-$(CONFIG_ARCH_SUNXI) += allwinner/
> obj-$(CONFIG_ARCH_MESON) += amlogic/
> obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
> diff --git a/drivers/phy/phy-zynqmp.c b/drivers/phy/phy-zynqmp.c
> new file mode 100644
> index 000000000000..8ab99d6b9220
> --- /dev/null
> +++ b/drivers/phy/phy-zynqmp.c
> @@ -0,0 +1,995 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * phy-zynqmp.c - PHY driver for Xilinx ZynqMP GT.
> + *
> + * Copyright (C) 2018-20 Xilinx Inc.
> + *
> + * Author: Anurag Kumar Vulisha <anuragku@xxxxxxxxxx>
> + * Author: Subbaraya Sundeep <sundeep.lkml@xxxxxxxxx>
> + * Author: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> + *
> + * This driver is tested for USB, SATA and Display Port currently.
> + * Other controllers PCIe and SGMII should also work but that is
> + * experimental as of now.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include <dt-bindings/phy/phy.h>
> +
> +/*
> + * Lane Registers
> + */
> +
> +/* TX De-emphasis parameters */
> +#define L0_TX_ANA_TM_18 0x0048
> +#define L0_TX_ANA_TM_118 0x01d8
> +#define L0_TX_ANA_TM_118_FORCE_17_0 BIT(0)
> +
> +/* DN Resistor calibration code parameters */
> +#define L0_TXPMA_ST_3 0x0b0c
> +#define L0_DN_CALIB_CODE 0x3f
> +
> +/* PMA control parameters */
> +#define L0_TXPMD_TM_45 0x0cb4
> +#define L0_TXPMD_TM_48 0x0cc0
> +#define L0_TXPMD_TM_45_OVER_DP_MAIN BIT(0)
> +#define L0_TXPMD_TM_45_ENABLE_DP_MAIN BIT(1)
> +#define L0_TXPMD_TM_45_OVER_DP_POST1 BIT(2)
> +#define L0_TXPMD_TM_45_ENABLE_DP_POST1 BIT(3)
> +#define L0_TXPMD_TM_45_OVER_DP_POST2 BIT(4)
> +#define L0_TXPMD_TM_45_ENABLE_DP_POST2 BIT(5)
> +
> +/* PCS control parameters */
> +#define L0_TM_DIG_6 0x106c
> +#define L0_TM_DIS_DESCRAMBLE_DECODER 0x0f
> +#define L0_TX_DIG_61 0x00f4
> +#define L0_TM_DISABLE_SCRAMBLE_ENCODER 0x0f
> +
> +/* PLL Test Mode register parameters */
> +#define L0_TM_PLL_DIG_37 0x2094
> +#define L0_TM_COARSE_CODE_LIMIT 0x10
> +
> +/* PLL SSC step size offsets */
> +#define L0_PLL_SS_STEPS_0_LSB 0x2368
> +#define L0_PLL_SS_STEPS_1_MSB 0x236c
> +#define L0_PLL_SS_STEP_SIZE_0_LSB 0x2370
> +#define L0_PLL_SS_STEP_SIZE_1 0x2374
> +#define L0_PLL_SS_STEP_SIZE_2 0x2378
> +#define L0_PLL_SS_STEP_SIZE_3_MSB 0x237c
> +#define L0_PLL_STATUS_READ_1 0x23e4
> +
> +/* SSC step size parameters */
> +#define STEP_SIZE_0_MASK 0xff
> +#define STEP_SIZE_1_MASK 0xff
> +#define STEP_SIZE_2_MASK 0xff
> +#define STEP_SIZE_3_MASK 0x3
> +#define STEP_SIZE_SHIFT 8
> +#define FORCE_STEP_SIZE 0x10
> +#define FORCE_STEPS 0x20
> +#define STEPS_0_MASK 0xff
> +#define STEPS_1_MASK 0x07
> +
> +/* Reference clock selection parameters */
> +#define L0_Ln_REF_CLK_SEL(n) (0x2860 + (n) * 4)
> +#define L0_REF_CLK_SEL_MASK 0x8f
> +
> +/* Calibration digital logic parameters */
> +#define L3_TM_CALIB_DIG19 0xec4c
> +#define L3_CALIB_DONE_STATUS 0xef14
> +#define L3_TM_CALIB_DIG18 0xec48
> +#define L3_TM_CALIB_DIG19_NSW 0x07
> +#define L3_TM_CALIB_DIG18_NSW 0xe0
> +#define L3_TM_OVERRIDE_NSW_CODE 0x20
> +#define L3_CALIB_DONE 0x02
> +#define L3_NSW_SHIFT 5
> +#define L3_NSW_PIPE_SHIFT 4
> +#define L3_NSW_CALIB_SHIFT 3
> +
> +#define PHY_REG_OFFSET 0x4000
> +
> +/*
> + * Global Registers
> + */
> +
> +/* Refclk selection parameters */
> +#define PLL_REF_SEL(n) (0x10000 + (n) * 4)
> +#define PLL_FREQ_MASK 0x1f
> +#define PLL_STATUS_LOCKED 0x10
> +
> +/* Inter Connect Matrix parameters */
> +#define ICM_CFG0 0x10010
> +#define ICM_CFG1 0x10014
> +#define ICM_CFG0_L0_MASK 0x07
> +#define ICM_CFG0_L1_MASK 0x70
> +#define ICM_CFG1_L2_MASK 0x07
> +#define ICM_CFG2_L3_MASK 0x70
> +#define ICM_CFG_SHIFT 4
> +
> +/* Inter Connect Matrix allowed protocols */
> +#define ICM_PROTOCOL_PD 0x0
> +#define ICM_PROTOCOL_PCIE 0x1
> +#define ICM_PROTOCOL_SATA 0x2
> +#define ICM_PROTOCOL_USB 0x3
> +#define ICM_PROTOCOL_DP 0x4
> +#define ICM_PROTOCOL_SGMII 0x5
> +
> +/* Test Mode common reset control parameters */
> +#define TM_CMN_RST 0x10018
> +#define TM_CMN_RST_EN 0x1
> +#define TM_CMN_RST_SET 0x2
> +#define TM_CMN_RST_MASK 0x3
> +
> +/* Bus width parameters */
> +#define TX_PROT_BUS_WIDTH 0x10040
> +#define RX_PROT_BUS_WIDTH 0x10044
> +#define PROT_BUS_WIDTH_10 0x0
> +#define PROT_BUS_WIDTH_20 0x1
> +#define PROT_BUS_WIDTH_40 0x2
> +#define PROT_BUS_WIDTH_SHIFT 2
> +
> +/* Number of GT lanes */
> +#define NUM_LANES 4
> +
> +/* SIOU SATA control register */
> +#define SATA_CONTROL_OFFSET 0x0100
> +
> +/* Total number of controllers */
> +#define CONTROLLERS_PER_LANE 5
> +
> +/* Protocol Type parameters */
> +#define XPSGTR_TYPE_USB0 0 /* USB controller 0 */
> +#define XPSGTR_TYPE_USB1 1 /* USB controller 1 */
> +#define XPSGTR_TYPE_SATA_0 2 /* SATA controller lane 0 */
> +#define XPSGTR_TYPE_SATA_1 3 /* SATA controller lane 1 */
> +#define XPSGTR_TYPE_PCIE_0 4 /* PCIe controller lane 0 */
> +#define XPSGTR_TYPE_PCIE_1 5 /* PCIe controller lane 1 */
> +#define XPSGTR_TYPE_PCIE_2 6 /* PCIe controller lane 2 */
> +#define XPSGTR_TYPE_PCIE_3 7 /* PCIe controller lane 3 */
> +#define XPSGTR_TYPE_DP_0 8 /* Display Port controller lane 0 */
> +#define XPSGTR_TYPE_DP_1 9 /* Display Port controller lane 1 */
> +#define XPSGTR_TYPE_SGMII0 10 /* Ethernet SGMII controller 0 */
> +#define XPSGTR_TYPE_SGMII1 11 /* Ethernet SGMII controller 1 */
> +#define XPSGTR_TYPE_SGMII2 12 /* Ethernet SGMII controller 2 */
> +#define XPSGTR_TYPE_SGMII3 13 /* Ethernet SGMII controller 3 */
> +
> +/* Timeout values */
> +#define TIMEOUT_US 1000
> +
> +struct xpsgtr_dev;
> +
> +/**
> + * struct xpsgtr_ssc - structure to hold SSC settings for a lane
> + * @refclk_rate: PLL reference clock frequency
> + * @pll_ref_clk: value to be written to register for corresponding ref clk rate
> + * @steps: number of steps of SSC (Spread Spectrum Clock)
> + * @step_size: step size of each step
> + */
> +struct xpsgtr_ssc {
> + u32 refclk_rate;
> + u8 pll_ref_clk;
> + u32 steps;
> + u32 step_size;
> +};
> +
> +/**
> + * struct xpsgtr_phy - representation of a lane
> + * @phy: pointer to the kernel PHY device
> + * @type: controller which uses this lane
> + * @lane: lane number
> + * @protocol: protocol in which the lane operates
> + * @skip_phy_init: skip phy_init() if true
> + * @dev: pointer to the xpsgtr_dev instance
> + * @refclk: reference clock index
> + */
> +struct xpsgtr_phy {
> + struct phy *phy;
> + u8 type;
> + u8 lane;
> + u8 protocol;
> + bool skip_phy_init;
> + struct xpsgtr_dev *dev;
> + unsigned int refclk;
> +};
> +
> +/**
> + * struct xpsgtr_dev - representation of a ZynMP GT device
> + * @dev: pointer to device
> + * @serdes: serdes base address
> + * @siou: siou base address
> + * @gtr_mutex: mutex for locking
> + * @phys: PHY lanes
> + * @refclk_sscs: spread spectrum settings for the reference clocks
> + * @tx_term_fix: fix for GT issue
> + * @saved_icm_cfg0: stored value of ICM CFG0 register
> + * @saved_icm_cfg1: stored value of ICM CFG1 register
> + */
> +struct xpsgtr_dev {
> + struct device *dev;
> + void __iomem *serdes;
> + void __iomem *siou;
> + struct mutex gtr_mutex; /* mutex for locking */
> + struct xpsgtr_phy phys[NUM_LANES];
> + const struct xpsgtr_ssc *refclk_sscs[NUM_LANES];
> + bool tx_term_fix;
> + unsigned int saved_icm_cfg0;
> + unsigned int saved_icm_cfg1;
> +};
> +
> +/* -----------------------------------------------------------------------------

The dash here is not commonly used. Please stick to default multi-line comment
style.
> + * Configuration Data
> + */
> +
> +/* lookup table to hold all settings needed for a ref clock frequency */
> +static const struct xpsgtr_ssc ssc_lookup[] = {
> + { 19200000, 0x05, 608, 264020 },
> + { 20000000, 0x06, 634, 243454 },
> + { 24000000, 0x07, 760, 168973 },
> + { 26000000, 0x08, 824, 143860 },
> + { 27000000, 0x09, 856, 86551 },
> + { 38400000, 0x0a, 1218, 65896 },
> + { 40000000, 0x0b, 634, 243454 },
> + { 52000000, 0x0c, 824, 143860 },
> + { 100000000, 0x0d, 1058, 87533 },
> + { 108000000, 0x0e, 856, 86551 },
> + { 125000000, 0x0f, 992, 119497 },
> + { 135000000, 0x10, 1070, 55393 },
> + { 150000000, 0x11, 792, 187091 }
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * I/O Accessors
> + */
> +
> +static inline u32 xpsgtr_read(struct xpsgtr_dev *gtr_dev, u32 reg)
> +{
> + return readl(gtr_dev->serdes + reg);
> +}
> +
> +static inline void xpsgtr_write(struct xpsgtr_dev *gtr_dev, u32 reg, u32 value)
> +{
> + writel(value, gtr_dev->serdes + reg);
> +}
> +
> +static inline void xpsgtr_clr_set(struct xpsgtr_dev *gtr_dev, u32 reg,
> + u32 clr, u32 set)
> +{
> + u32 value = xpsgtr_read(gtr_dev, reg);
> +
> + value &= ~clr;
> + value |= set;
> + xpsgtr_write(gtr_dev, reg, value);
> +}
> +
> +static inline u32 xpsgtr_read_phy(struct xpsgtr_phy *gtr_phy, u32 reg)
> +{
> + void __iomem *addr = gtr_phy->dev->serdes
> + + gtr_phy->lane * PHY_REG_OFFSET + reg;
> +
> + return readl(addr);
> +}
> +
> +static inline void xpsgtr_write_phy(struct xpsgtr_phy *gtr_phy,
> + u32 reg, u32 value)
> +{
> + void __iomem *addr = gtr_phy->dev->serdes
> + + gtr_phy->lane * PHY_REG_OFFSET + reg;
> +
> + writel(value, addr);
> +}
> +
> +static inline void xpsgtr_clr_set_phy(struct xpsgtr_phy *gtr_phy,
> + u32 reg, u32 clr, u32 set)
> +{
> + void __iomem *addr = gtr_phy->dev->serdes
> + + gtr_phy->lane * PHY_REG_OFFSET + reg;
> +
> + writel((readl(addr) & ~clr) | set, addr);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Hardware Configuration
> + */
> +
> +/* Wait for the PLL to lock (with a timeout). */
> +static int xpsgtr_wait_pll_lock(struct phy *phy)
> +{
> + struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
> + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> + unsigned int timeout = TIMEOUT_US;
> + int ret;
> +
> + dev_dbg(gtr_dev->dev, "Waiting for PLL lock\n");
> +
> + while (1) {
> + u32 reg = xpsgtr_read_phy(gtr_phy, L0_PLL_STATUS_READ_1);
> +
> + if ((reg & PLL_STATUS_LOCKED) == PLL_STATUS_LOCKED) {
> + ret = 0;
> + break;
> + }
> +
> + if (--timeout == 0) {
> + ret = -ETIMEDOUT;
> + break;
> + }
> +
> + udelay(1);
> + }
> +
> + if (ret == -ETIMEDOUT)
> + dev_err(gtr_dev->dev,
> + "lane %u (type %u, protocol %u): PLL lock timeout\n",
> + gtr_phy->lane, gtr_phy->type, gtr_phy->protocol);
> +
> + return ret;
> +}
> +
> +/* Configure PLL and spread-sprectrum clock. */
> +static void xpsgtr_configure_pll(struct xpsgtr_phy *gtr_phy)
> +{
> + const struct xpsgtr_ssc *ssc;
> + u32 step_size;
> +
> + ssc = gtr_phy->dev->refclk_sscs[gtr_phy->refclk];
> + step_size = ssc->step_size;
> +
> + xpsgtr_clr_set(gtr_phy->dev, PLL_REF_SEL(gtr_phy->lane),
> + PLL_FREQ_MASK, ssc->pll_ref_clk);
> +
> + /* Enable lane clock sharing, if required */
> + if (gtr_phy->refclk != gtr_phy->lane) {
> + /* Lane3 Ref Clock Selection Register */
> + xpsgtr_clr_set(gtr_phy->dev, L0_Ln_REF_CLK_SEL(gtr_phy->lane),
> + L0_REF_CLK_SEL_MASK, 1 << gtr_phy->refclk);
> + }
> +
> + /* SSC step size [7:0] */
> + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_0_LSB,
> + STEP_SIZE_0_MASK, step_size & STEP_SIZE_0_MASK);
> +
> + /* SSC step size [15:8] */
> + step_size >>= STEP_SIZE_SHIFT;
> + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_1,
> + STEP_SIZE_1_MASK, step_size & STEP_SIZE_1_MASK);
> +
> + /* SSC step size [23:16] */
> + step_size >>= STEP_SIZE_SHIFT;
> + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_2,
> + STEP_SIZE_2_MASK, step_size & STEP_SIZE_2_MASK);
> +
> + /* SSC steps [7:0] */
> + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEPS_0_LSB,
> + STEPS_0_MASK, ssc->steps & STEPS_0_MASK);
> +
> + /* SSC steps [10:8] */
> + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEPS_1_MSB,
> + STEPS_1_MASK,
> + (ssc->steps >> STEP_SIZE_SHIFT) & STEPS_1_MASK);
> +
> + /* SSC step size [24:25] */
> + step_size >>= STEP_SIZE_SHIFT;
> + xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_3_MSB,
> + STEP_SIZE_3_MASK, (step_size & STEP_SIZE_3_MASK) |
> + FORCE_STEP_SIZE | FORCE_STEPS);
> +}
> +
> +/* Configure the lane protocol. */
> +static void xpsgtr_lane_set_protocol(struct xpsgtr_phy *gtr_phy)
> +{
> + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> + u8 protocol = gtr_phy->protocol;
> +
> + switch (gtr_phy->lane) {
> + case 0:
> + xpsgtr_clr_set(gtr_dev, ICM_CFG0, ICM_CFG0_L0_MASK, protocol);
> + break;
> + case 1:
> + xpsgtr_clr_set(gtr_dev, ICM_CFG0, ICM_CFG0_L1_MASK,
> + protocol << ICM_CFG_SHIFT);
> + break;
> + case 2:
> + xpsgtr_clr_set(gtr_dev, ICM_CFG1, ICM_CFG0_L0_MASK, protocol);
> + break;
> + case 3:
> + xpsgtr_clr_set(gtr_dev, ICM_CFG1, ICM_CFG0_L1_MASK,
> + protocol << ICM_CFG_SHIFT);
> + break;
> + default:
> + /* We already checked 0 <= lane <= 3 */
> + break;
> + }
> +}
> +
> +/* Bypass (de)scrambler and 8b/10b decoder and encoder. */
> +static void xpsgtr_bypass_scrambler_8b10b(struct xpsgtr_phy *gtr_phy)
> +{
> + xpsgtr_write_phy(gtr_phy, L0_TM_DIG_6, L0_TM_DIS_DESCRAMBLE_DECODER);
> + xpsgtr_write_phy(gtr_phy, L0_TX_DIG_61, L0_TM_DISABLE_SCRAMBLE_ENCODER);
> +}
> +
> +/* DP-specific initialization. */
> +static void xpsgtr_phy_init_dp(struct xpsgtr_phy *gtr_phy)
> +{
> + xpsgtr_write_phy(gtr_phy, L0_TXPMD_TM_45,
> + L0_TXPMD_TM_45_OVER_DP_MAIN |
> + L0_TXPMD_TM_45_ENABLE_DP_MAIN |
> + L0_TXPMD_TM_45_OVER_DP_POST1 |
> + L0_TXPMD_TM_45_OVER_DP_POST2 |
> + L0_TXPMD_TM_45_ENABLE_DP_POST2);
> + xpsgtr_write_phy(gtr_phy, L0_TX_ANA_TM_118,
> + L0_TX_ANA_TM_118_FORCE_17_0);
> +}
> +
> +/* SATA-specific initialization. */
> +static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy)
> +{
> + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> +
> + xpsgtr_bypass_scrambler_8b10b(gtr_phy);
> +
> + writel(gtr_phy->lane, gtr_dev->siou + SATA_CONTROL_OFFSET);
> +}

The cover letter mentions this has been tested with DP. Was it tested with SATA
and SGMII as well?
> +
> +/* SGMII-specific initialization. */
> +static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy)
> +{
> + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> +
> + /* Set SGMII protocol TX and RX bus width to 10 bits. */
> + xpsgtr_write(gtr_dev, TX_PROT_BUS_WIDTH,
> + PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
> + xpsgtr_write(gtr_dev, RX_PROT_BUS_WIDTH,
> + PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
> +
> + xpsgtr_bypass_scrambler_8b10b(gtr_phy);
> +}
> +
> +/* Configure TX de-emphasis and margining for DP. */
> +static void xpsgtr_phy_configure_dp(struct xpsgtr_phy *gtr_phy, unsigned int pre,
> + unsigned int voltage)
> +{
> + static const u8 voltage_swing[4][4] = {
> + { 0x2a, 0x27, 0x24, 0x20 },
> + { 0x27, 0x23, 0x20, 0xff },
> + { 0x24, 0x20, 0xff, 0xff },
> + { 0xff, 0xff, 0xff, 0xff }
> + };
> + static const u8 pre_emphasis[4][4] = {
> + { 0x02, 0x02, 0x02, 0x02 },
> + { 0x01, 0x01, 0x01, 0xff },
> + { 0x00, 0x00, 0xff, 0xff },
> + { 0xff, 0xff, 0xff, 0xff }
> + };
> +
> + xpsgtr_write_phy(gtr_phy, L0_TXPMD_TM_48, voltage_swing[pre][voltage]);
> + xpsgtr_write_phy(gtr_phy, L0_TX_ANA_TM_18, pre_emphasis[pre][voltage]);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * PHY Operations
> + */
> +
> +static bool xpsgtr_phy_init_required(struct xpsgtr_phy *gtr_phy)
> +{
> + /*
> + * As USB may save the snapshot of the states during hibernation, doing
> + * phy_init() will put the USB controller into reset, resulting in the
> + * losing of the saved snapshot. So try to avoid phy_init() for USB
> + * except when gtr_phy->skip_phy_init is false (this happens when FPD is
> + * shutdown during suspend or when gt lane is changed from current one)
> + */
> + if (gtr_phy->protocol == ICM_PROTOCOL_USB && gtr_phy->skip_phy_init)
> + return false;
> + else

'else' here is un-necessary.
> + return true;
> +}
> +
> +/*
> + * There is a functional issue in the GT. The TX termination resistance can be
> + * out of spec due to a issue in the calibration logic. This is the workaround
> + * to fix it, required for XCZU9EG silicon.
> + */
> +static int xpsgtr_phy_tx_term_fix(struct xpsgtr_phy *gtr_phy)
> +{
> + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> + u32 timeout = TIMEOUT_US;
> + u32 nsw;
> +
> + /* Enabling Test Mode control for CMN Rest */
> + xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_SET);

This function writes to the global registers. Wouldn't this affect a lane that
is already configured?
> +
> + /* Set Test Mode reset */
> + xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_EN);
> +
> + xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG18, 0x00);
> + xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG19, L3_TM_OVERRIDE_NSW_CODE);
> +
> + /*
> + * As a part of work around sequence for PMOS calibration fix,
> + * we need to configure any lane ICM_CFG to valid protocol. This
> + * will deassert the CMN_Resetn signal.
> + */
> + xpsgtr_lane_set_protocol(gtr_phy);
> +
> + /* Clear Test Mode reset */
> + xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_SET);
> +
> + dev_dbg(gtr_dev->dev, "calibrating...\n");
> +
> + do {
> + u32 reg = xpsgtr_read(gtr_dev, L3_CALIB_DONE_STATUS);
> +
> + if ((reg & L3_CALIB_DONE) == L3_CALIB_DONE)
> + break;
> +
> + if (!--timeout) {
> + dev_err(gtr_dev->dev, "calibration time out\n");
> + return -ETIMEDOUT;
> + }
> +
> + udelay(1);
> + } while (timeout > 0);
> +
> + dev_dbg(gtr_dev->dev, "calibration done\n");
> +
> + /* Reading NMOS Register Code */
> + nsw = xpsgtr_read(gtr_dev, L0_TXPMA_ST_3) & L0_DN_CALIB_CODE;
> +
> + /* Set Test Mode reset */
> + xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_EN);
> +
> + /* Writing NMOS register values back [5:3] */
> + xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG19, nsw >> L3_NSW_CALIB_SHIFT);
> +
> + /* Writing NMOS register value [2:0] */
> + xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG18,
> + ((nsw & L3_TM_CALIB_DIG19_NSW) << L3_NSW_SHIFT) |
> + (1 << L3_NSW_PIPE_SHIFT));
> +
> + /* Clear Test Mode reset */
> + xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_SET);
> +
> + return 0;
> +}
> +
> +static int xpsgtr_phy_init(struct phy *phy)
> +{
> + struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
> + struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
> + int ret = 0;
> +
> + mutex_lock(&gtr_dev->gtr_mutex);
> +
> + /* Skip initialization if not required. */
> + if (!xpsgtr_phy_init_required(gtr_phy))
> + goto out;
> +
> + if (gtr_dev->tx_term_fix) {
> + ret = xpsgtr_phy_tx_term_fix(gtr_phy);
> + if (ret < 0)
> + goto out;
> +
> + gtr_dev->tx_term_fix = false;
> + }
> +
> + /* Enable coarse code saturation limiting logic. */
> + xpsgtr_write_phy(gtr_phy, L0_TM_PLL_DIG_37, L0_TM_COARSE_CODE_LIMIT);
> +
> + /*
> + * Configure the PLL, the lane protocol, and perform protocol-specific
> + * initialization.
> + */
> + xpsgtr_configure_pll(gtr_phy);
> + xpsgtr_lane_set_protocol(gtr_phy);
> +
> + switch (gtr_phy->protocol) {
> + case ICM_PROTOCOL_DP:
> + xpsgtr_phy_init_dp(gtr_phy);
> + break;
> +
> + case ICM_PROTOCOL_SATA:
> + xpsgtr_phy_init_sata(gtr_phy);
> + break;
> +
> + case ICM_PROTOCOL_SGMII:
> + xpsgtr_phy_init_sgmii(gtr_phy);
> + break;
> + }
> +
> +out:
> + mutex_unlock(&gtr_dev->gtr_mutex);
> + return ret;
> +}
> +
> +static int xpsgtr_phy_exit(struct phy *phy)
> +{
> + struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
> +
> + gtr_phy->skip_phy_init = false;
> +
> + return 0;
> +}
> +
> +static int xpsgtr_phy_power_on(struct phy *phy)
> +{
> + struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
> + int ret = 0;
> +
> + /*
> + * Wait for the PLL to lock. For DP, only wait on DP0 to avoid
> + * cumulating waits for both lanes. The user is expected to initialize
> + * lane 0 last.
> + */
> + if (gtr_phy->protocol != ICM_PROTOCOL_DP ||
> + gtr_phy->type == XPSGTR_TYPE_DP_0)
> + ret = xpsgtr_wait_pll_lock(phy);
> +
> + return ret;
> +}
> +
> +static int xpsgtr_phy_configure(struct phy *phy, union phy_configure_opts *opts)
> +{
> + struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
> +
> + if (gtr_phy->protocol != ICM_PROTOCOL_DP)
> + return 0;
> +
> + xpsgtr_phy_configure_dp(gtr_phy, opts->dp.pre[0], opts->dp.voltage[0]);
> +
> + return 0;
> +}
> +
> +static const struct phy_ops xpsgtr_phyops = {
> + .init = xpsgtr_phy_init,
> + .exit = xpsgtr_phy_exit,
> + .power_on = xpsgtr_phy_power_on,
> + .configure = xpsgtr_phy_configure,
> + .owner = THIS_MODULE,
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * OF Xlate Support
> + */
> +
> +/* Set the lane type and protocol based on the PHY type and instance number. */
> +static int xpsgtr_set_lane_type(struct xpsgtr_phy *gtr_phy, u8 phy_type,
> + unsigned int phy_instance)
> +{
> + unsigned int num_phy_types;
> + const int *phy_types;
> +
> + switch (phy_type) {
> + case PHY_TYPE_SATA: {
> + static const int types[] = {
> + XPSGTR_TYPE_SATA_0,
> + XPSGTR_TYPE_SATA_1,
> + };
> +
> + phy_types = types;
> + num_phy_types = ARRAY_SIZE(types);
> + gtr_phy->protocol = ICM_PROTOCOL_SATA;
> + break;
> + }
> + case PHY_TYPE_USB3: {
> + static const int types[] = {
> + XPSGTR_TYPE_USB0,
> + XPSGTR_TYPE_USB1,
> + };
> +
> + phy_types = types;
> + num_phy_types = ARRAY_SIZE(types);
> + gtr_phy->protocol = ICM_PROTOCOL_USB;
> + break;
> + }
> + case PHY_TYPE_DP: {
> + static const int types[] = {
> + XPSGTR_TYPE_DP_0,
> + XPSGTR_TYPE_DP_1,
> + };
> +
> + phy_types = types;
> + num_phy_types = ARRAY_SIZE(types);
> + gtr_phy->protocol = ICM_PROTOCOL_DP;
> + break;
> + }
> + case PHY_TYPE_PCIE: {
> + static const int types[] = {
> + XPSGTR_TYPE_PCIE_0,
> + XPSGTR_TYPE_PCIE_1,
> + XPSGTR_TYPE_PCIE_2,
> + XPSGTR_TYPE_PCIE_3,
> + };
> +
> + phy_types = types;
> + num_phy_types = ARRAY_SIZE(types);
> + gtr_phy->protocol = ICM_PROTOCOL_PCIE;
> + break;
> + }
> + case PHY_TYPE_SGMII: {
> + static const int types[] = {
> + XPSGTR_TYPE_SGMII0,
> + XPSGTR_TYPE_SGMII1,
> + XPSGTR_TYPE_SGMII2,
> + XPSGTR_TYPE_SGMII3,
> + };
> +
> + phy_types = types;
> + num_phy_types = ARRAY_SIZE(types);
> + gtr_phy->protocol = ICM_PROTOCOL_SGMII;
> + break;
> + }
> + default:
> + return -EINVAL;
> + }
> +
> + if (phy_instance >= num_phy_types)
> + return -EINVAL;
> +
> + gtr_phy->type = phy_types[phy_instance];
> + return 0;
> +}
> +
> +/*
> + * Valid combinations of controllers and lanes (Interconnect Matrix).
> + */
> +static const unsigned int icm_matrix[NUM_LANES][CONTROLLERS_PER_LANE] = {
> + { XPSGTR_TYPE_PCIE_0, XPSGTR_TYPE_SATA_0, XPSGTR_TYPE_USB0,
> + XPSGTR_TYPE_DP_1, XPSGTR_TYPE_SGMII0 },
> + { XPSGTR_TYPE_PCIE_1, XPSGTR_TYPE_SATA_1, XPSGTR_TYPE_USB0,
> + XPSGTR_TYPE_DP_0, XPSGTR_TYPE_SGMII1 },
> + { XPSGTR_TYPE_PCIE_2, XPSGTR_TYPE_SATA_0, XPSGTR_TYPE_USB0,
> + XPSGTR_TYPE_DP_1, XPSGTR_TYPE_SGMII2 },
> + { XPSGTR_TYPE_PCIE_3, XPSGTR_TYPE_SATA_1, XPSGTR_TYPE_USB1,
> + XPSGTR_TYPE_DP_0, XPSGTR_TYPE_SGMII3 }
> +};
> +
> +/* Translate OF phandle and args to PHY instance. */
> +static struct phy *xpsgtr_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev);
> + struct xpsgtr_phy *gtr_phy;
> + unsigned int phy_instance;
> + unsigned int phy_lane;
> + unsigned int phy_type;
> + unsigned int refclk;
> + unsigned int i;
> + int ret;
> +
> + if (args->args_count != 4) {
> + dev_err(dev, "Invalid number of cells in 'phy' property\n");
> + return ERR_PTR(-EINVAL);
> + }
> +
> + /*
> + * Get the PHY parameters from the OF arguments and derive the lane
> + * type.
> + */
> + phy_lane = args->args[0];
> + if (phy_lane >= ARRAY_SIZE(gtr_dev->phys)) {
> + dev_err(dev, "Invalid lane number %u\n", phy_lane);
> + return ERR_PTR(-ENODEV);
> + }
> +
> + gtr_phy = &gtr_dev->phys[phy_lane];
> + phy_type = args->args[1];
> + phy_instance = args->args[2];
> +
> + ret = xpsgtr_set_lane_type(gtr_phy, phy_type, phy_instance);
> + if (ret < 0) {
> + dev_err(gtr_dev->dev, "Invalid PHY type and/or instance\n");
> + return ERR_PTR(ret);
> + }
> +
> + refclk = args->args[3];
> + if (refclk >= ARRAY_SIZE(gtr_dev->refclk_sscs) ||
> + !gtr_dev->refclk_sscs[refclk]) {
> + dev_err(dev, "Invalid reference clock number %u\n", refclk);
> + return ERR_PTR(-EINVAL);
> + }
> +
> + gtr_phy->refclk = refclk;
> +
> + /*
> + * Ensure that the Interconnect Matrix is obeyed, i.e a given lane type
> + * is allowed to operate on the lane.
> + */
> + for (i = 0; i < CONTROLLERS_PER_LANE; i++) {
> + if (icm_matrix[phy_lane][i] == gtr_phy->type)
> + return gtr_phy->phy;
> + }
> +
> + return ERR_PTR(-EINVAL);
> +}
> +
> +/* -----------------------------------------------------------------------------
> + * Power Management
> + */
> +
> +#ifdef CONFIG_PM
> +static int xpsgtr_suspend(struct device *dev)
> +{
> + struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev);
> +
> + /* Save the snapshot ICM_CFG registers. */
> + gtr_dev->saved_icm_cfg0 = xpsgtr_read(gtr_dev, ICM_CFG0);
> + gtr_dev->saved_icm_cfg1 = xpsgtr_read(gtr_dev, ICM_CFG1);
> +
> + return 0;
> +}
> +
> +static int xpsgtr_resume(struct device *dev)
> +{
> + struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev);
> + unsigned int icm_cfg0, icm_cfg1;
> + unsigned int i;
> + bool skip_phy_init;
> +
> + icm_cfg0 = xpsgtr_read(gtr_dev, ICM_CFG0);
> + icm_cfg1 = xpsgtr_read(gtr_dev, ICM_CFG1);
> +
> + /* Return if no GT lanes got configured before suspend. */
> + if (!gtr_dev->saved_icm_cfg0 && !gtr_dev->saved_icm_cfg1)
> + return 0;
> +
> + /* Check if the ICM configurations changed after suspend. */
> + if (icm_cfg0 == gtr_dev->saved_icm_cfg0 &&
> + icm_cfg1 == gtr_dev->saved_icm_cfg1)
> + skip_phy_init = true;
> + else
> + skip_phy_init = false;
> +
> + /* Update the skip_phy_init for all gtr_phy instances. */
> + for (i = 0; i < ARRAY_SIZE(gtr_dev->phys); i++)
> + gtr_dev->phys[i].skip_phy_init = skip_phy_init;
> +
> + return 0;
> +}
> +#endif /* CONFIG_PM */
> +
> +static const struct dev_pm_ops xpsgtr_pm_ops = {
> + SET_SYSTEM_SLEEP_PM_OPS(xpsgtr_suspend, xpsgtr_resume)
> +};
> +
> +/* -----------------------------------------------------------------------------
> + * Probe & Platform Driver
> + */
> +
> +static int xpsgtr_get_ref_clocks(struct xpsgtr_dev *gtr_dev)
> +{
> + unsigned int refclk;
> +
> + for (refclk = 0; refclk < ARRAY_SIZE(gtr_dev->refclk_sscs); ++refclk) {
> + unsigned long rate;
> + unsigned int i;
> + struct clk *clk;
> + char name[8];
> +
> + snprintf(name, sizeof(name), "ref%u", refclk);
> + clk = devm_clk_get_optional(gtr_dev->dev, name);
> + if (IS_ERR(clk)) {
> + if (PTR_ERR(clk) != -EPROBE_DEFER)
> + dev_err(gtr_dev->dev,
> + "Failed to get reference clock %u: %ld\n",
> + refclk, PTR_ERR(clk));
> + return PTR_ERR(clk);
> + }
> +
> + if (!clk)
> + continue;
> +
> + /*
> + * Get the spread spectrum (SSC) settings for the reference
> + * clock rate.
> + */
> + rate = clk_get_rate(clk);
> +
> + for (i = 0 ; i < ARRAY_SIZE(ssc_lookup); i++) {
> + if (rate == ssc_lookup[i].refclk_rate) {
> + gtr_dev->refclk_sscs[refclk] = &ssc_lookup[i];
> + break;
> + }
> + }
> +
> + if (i == ARRAY_SIZE(ssc_lookup)) {
> + dev_err(gtr_dev->dev,
> + "Invalid rate %lu for reference clock %u\n",
> + rate, refclk);
> + return -EINVAL;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int xpsgtr_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct xpsgtr_dev *gtr_dev;
> + struct phy_provider *provider;
> + unsigned int port;
> + int ret;
> +
> + gtr_dev = devm_kzalloc(&pdev->dev, sizeof(*gtr_dev), GFP_KERNEL);
> + if (!gtr_dev)
> + return -ENOMEM;
> +
> + gtr_dev->dev = &pdev->dev;
> + platform_set_drvdata(pdev, gtr_dev);
> +
> + mutex_init(&gtr_dev->gtr_mutex);
> +
> + if (of_device_is_compatible(np, "xlnx,zynqmp-psgtr"))
> + gtr_dev->tx_term_fix =
> + of_property_read_bool(np, "xlnx,tx-termination-fix");
> +
> + /* Acquire resources. */
> + gtr_dev->serdes = devm_platform_ioremap_resource_byname(pdev, "serdes");
> + if (IS_ERR(gtr_dev->serdes))
> + return PTR_ERR(gtr_dev->serdes);
> +
> + gtr_dev->siou = devm_platform_ioremap_resource_byname(pdev, "siou");
> + if (IS_ERR(gtr_dev->siou))
> + return PTR_ERR(gtr_dev->siou);
> +
> + ret = xpsgtr_get_ref_clocks(gtr_dev);
> + if (ret)
> + return ret;
> +
> + /* Create PHYs. */
> + for (port = 0; port < ARRAY_SIZE(gtr_dev->phys); ++port) {
> + struct xpsgtr_phy *gtr_phy = &gtr_dev->phys[port];
> + struct phy *phy;
> +
> + gtr_phy->lane = port;
> + gtr_phy->dev = gtr_dev;
> +
> + phy = devm_phy_create(&pdev->dev, np, &xpsgtr_phyops);
> + if (IS_ERR(phy)) {
> + dev_err(&pdev->dev, "failed to create PHY\n");
> + return PTR_ERR(phy);
> + }
> +
> + gtr_phy->phy = phy;
> + phy_set_drvdata(phy, gtr_phy);
> + }
> +
> + /* Register the PHY provider. */
> + provider = devm_of_phy_provider_register(&pdev->dev, xpsgtr_xlate);
> + if (IS_ERR(provider)) {
> + dev_err(&pdev->dev, "registering provider failed\n");
> + return PTR_ERR(provider);

wrong indentation.

Thanks
Kishon