Re: Re: [PATCH net v2 0/2] Revert the 'socket_alloc' life cycle change

From: Paul E. McKenney
Date: Tue May 05 2020 - 14:27:26 EST


On Tue, May 05, 2020 at 07:49:43PM +0200, SeongJae Park wrote:
> On Tue, 5 May 2020 10:23:58 -0700 "Paul E. McKenney" <paulmck@xxxxxxxxxx> wrote:
>
> > On Tue, May 05, 2020 at 09:25:06AM -0700, Eric Dumazet wrote:
> > >
> > >
> > > On 5/5/20 9:13 AM, SeongJae Park wrote:
> > > > On Tue, 5 May 2020 09:00:44 -0700 Eric Dumazet <edumazet@xxxxxxxxxx> wrote:
> > > >
> > > >> On Tue, May 5, 2020 at 8:47 AM SeongJae Park <sjpark@xxxxxxxxxx> wrote:
> > > >>>
> > > >>> On Tue, 5 May 2020 08:20:50 -0700 Eric Dumazet <eric.dumazet@xxxxxxxxx> wrote:
> > > >>>
> > > >>>>
> > > >>>>
> > > >>>> On 5/5/20 8:07 AM, SeongJae Park wrote:
> > > >>>>> On Tue, 5 May 2020 07:53:39 -0700 Eric Dumazet <edumazet@xxxxxxxxxx> wrote:
> > > >>>>>
> > > >>>>
> > > >>>>>> Why do we have 10,000,000 objects around ? Could this be because of
> > > >>>>>> some RCU problem ?
> > > >>>>>
> > > >>>>> Mainly because of a long RCU grace period, as you guess. I have no idea how
> > > >>>>> the grace period became so long in this case.
> > > >>>>>
> > > >>>>> As my test machine was a virtual machine instance, I guess RCU readers
> > > >>>>> preemption[1] like problem might affected this.
> > > >>>>>
> > > >>>>> [1] https://www.usenix.org/system/files/conference/atc17/atc17-prasad.pdf
> >
> > If this is the root cause of the problem, then it will be necessary to
> > provide a hint to the hypervisor. Or, in the near term, avoid loading
> > the hypervisor the point that vCPU preemption is so lengthy.
> >
> > RCU could also provide some sort of pre-stall-warning notification that
> > some of the CPUs aren't passing through quiescent states, which might
> > allow the guest OS's userspace to take corrective action.
> >
> > But first, what are you doing to either confirm or invalidate the
> > hypothesis that this might be due to vCPU preemption?
>
> Nothing, I was just guessing. Sorry if this made you confused.
>
> >
> > > >>>>>> Once Al patches reverted, do you have 10,000,000 sock_alloc around ?
> > > >>>>>
> > > >>>>> Yes, both the old kernel that prior to Al's patches and the recent kernel
> > > >>>>> reverting the Al's patches didn't reproduce the problem.
> > > >>>>>
> > > >>>>
> > > >>>> I repeat my question : Do you have 10,000,000 (smaller) objects kept in slab caches ?
> > > >>>>
> > > >>>> TCP sockets use the (very complex, error prone) SLAB_TYPESAFE_BY_RCU, but not the struct socket_wq
> > > >>>> object that was allocated in sock_alloc_inode() before Al patches.
> > > >>>>
> > > >>>> These objects should be visible in kmalloc-64 kmem cache.
> > > >>>
> > > >>> Not exactly the 10,000,000, as it is only the possible highest number, but I
> > > >>> was able to observe clear exponential increase of the number of the objects
> > > >>> using slabtop. Before the start of the problematic workload, the number of
> > > >>> objects of 'kmalloc-64' was 5760, but I was able to observe the number increase
> > > >>> to 1,136,576.
> > > >>>
> > > >>> OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME
> > > >>> before: 5760 5088 88% 0.06K 90 64 360K kmalloc-64
> > > >>> after: 1136576 1136576 100% 0.06K 17759 64 71036K kmalloc-64
> > > >>>
> > > >>
> > > >> Great, thanks.
> > > >>
> > > >> How recent is the kernel you are running for your experiment ?
> > > >
> > > > It's based on 5.4.35.
> >
> > Is it possible to retest on v5.6? I have been adding various mechanisms
> > to make RCU keep up better with heavy callback overload.
>
> I will try soon!
>
> >
> > Also, could you please provide the .config? If either NO_HZ_FULL or
> > RCU_NOCB_CPU, please also provide the kernel boot parameters.
>
> NO_HZ_FULL is not set, but RCU_NOCB_CPU is y.

OK, this is important information.

> I think I should check whether it's ok to share the full config and boot
> parameters. Please wait this.

I probably don't need the whole thing. So, if it makes it easier to
gain approval...

The main thing I need are CONFIG_PREEMPT and the various Kconfig options
having "RCU" in their names. For example, I have no need for any of the
options pertaining to device drivers. (As far as I know at the moment,
anyway!)

For the boot parameters, I am very interested in rcu_nocbs=. Along with
any other boot parameters whose names contain "rcu".

If rcu_nocbs does designate have any CPUs listed, another thing to check
is where the rcuo kthreads are permitted to run. The reason that this
is important is that any CPU listed in the rcu_nocbs= boot parameter
has its RCU callbacks invoked by one of the rcuo kthreads. If you have
booted with (say) "rcu_nocbs=1,63" and then bound all of the resulting
rcuo kthreads to CPU 0, you just tied RCU's hands, making it unable to
keep up with any reasonable RCU callback load.

This sort of configuration is permitted, but it is intended for tightly
controlled real-time or HPC systems whose configurations and workloads
avoid tossing out large numbers of callbacks. Which might not be the
case for your workload.

> > > >> Let's make sure the bug is not in RCU.
> > > >
> > > > One thing I can currently say is that the grace period passes at last. I
> > > > modified the benchmark to repeat not 10,000 times but only 5,000 times to run
> > > > the test without OOM but easily observable memory pressure. As soon as the
> > > > benchmark finishes, the memory were freed.
> > > >
> > > > If you need more tests, please let me know.
> > >
> > > I would ask Paul opinion on this issue, because we have many objects
> > > being freed after RCU grace periods.
> >
> > As always, "It depends."
> >
> > o If the problem is a too-long RCU reader, RCU is prohibited from
> > ending the grace period. The reader duration must be shortened,
> > and until it is shortened, there is nothing RCU can do.
> >
> > o In some special cases of the above, RCU can and does help, for
> > example, by enlisting the aid of cond_resched(). So perhaps
> > there is a long in-kernel loop that needs a cond_resched().
> >
> > And perhaps RCU can help for some types of vCPU preemption.
> >
> > o As Al suggested offline and as has been discussed in the past,
> > it would not be hard to cause RCU to burn CPU to attain faster
> > grace periods during OOM events. This could be helpful, but only
> > given that RCU readers are completing in reasonable timeframes.
>
> Totally agreed.
>
> > > If RCU subsystem can not keep-up, I guess other workloads will also suffer.
> >
> > If readers are not excessively long, RCU should be able to keep up.
> > (In the absence of misconfigurations, for example, both NO_HZ_FULL and
> > then binding all the rcuo kthreads to a single CPU on a 100-CPU system
> > or some such.)
> >
> > > Sure, we can revert patches there and there trying to work around the issue,
> > > but for objects allocated from process context, we should not have these problems.
> >
> > Agreed, let's get more info on what is happening to RCU.
> >
> > One approach is to shorten the RCU CPU stall warning timeout
> > (rcupdate.rcu_cpu_stall_timeout=10 for 10 seconds).
>
> I will also try this and let you know the results.

Sounds good, thank you!

Thanx, Paul