Re: [PATCH v4 6/6] spi: spi-qcom-qspi: Use OPP API to set clk/perf state

From: Matthias Kaehlcke
Date: Tue May 05 2020 - 12:38:16 EST


Hi Rajendra,

On Sun, May 03, 2020 at 05:34:29PM +0530, Rajendra Nayak wrote:
> QSPI needs to vote on a performance state of a power domain depending on
> the clock rate. Add support for it by specifying the perf state/clock rate
> as an OPP table in device tree.
>
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> Cc: Mark Brown <broonie@xxxxxxxxxx>
> Cc: Alok Chauhan <alokc@xxxxxxxxxxxxxx>
> Cc: Akash Asthana <akashast@xxxxxxxxxxxxxx>
> Cc: linux-spi@xxxxxxxxxxxxxxx
> ---
> drivers/spi/spi-qcom-qspi.c | 29 ++++++++++++++++++++++++++++-
> 1 file changed, 28 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/spi/spi-qcom-qspi.c b/drivers/spi/spi-qcom-qspi.c
> index 3c4f83b..eb53c00 100644
> --- a/drivers/spi/spi-qcom-qspi.c
> +++ b/drivers/spi/spi-qcom-qspi.c
> @@ -8,6 +8,7 @@
> #include <linux/of.h>
> #include <linux/of_platform.h>
> #include <linux/pm_runtime.h>
> +#include <linux/pm_opp.h>
> #include <linux/spi/spi.h>
> #include <linux/spi/spi-mem.h>
>
> @@ -139,6 +140,8 @@ struct qcom_qspi {
> struct device *dev;
> struct clk_bulk_data *clks;
> struct qspi_xfer xfer;
> + struct opp_table *opp_table;
> + bool has_opp_table;
> /* Lock to protect xfer and IRQ accessed registers */
> spinlock_t lock;
> };
> @@ -235,7 +238,7 @@ static int qcom_qspi_transfer_one(struct spi_master *master,
> speed_hz = xfer->speed_hz;
>
> /* In regular operation (SBL_EN=1) core must be 4x transfer clock */
> - ret = clk_set_rate(ctrl->clks[QSPI_CLK_CORE].clk, speed_hz * 4);
> + ret = dev_pm_opp_set_rate(ctrl->dev, speed_hz * 4);
> if (ret) {
> dev_err(ctrl->dev, "Failed to set core clk %d\n", ret);
> return ret;
> @@ -481,6 +484,20 @@ static int qcom_qspi_probe(struct platform_device *pdev)
> master->handle_err = qcom_qspi_handle_err;
> master->auto_runtime_pm = true;
>
> + ctrl->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "core");
> + if (IS_ERR(ctrl->opp_table)) {
> + ret = PTR_ERR(ctrl->opp_table);
> + goto exit_probe_master_put;
> + }
> + /* OPP table is optional */
> + ret = dev_pm_opp_of_add_table(&pdev->dev);
> + if (!ret) {
> + ctrl->has_opp_table = true;
> + } else if (ret != -ENODEV) {
> + dev_err(&pdev->dev, "invalid OPP table in device tree\n");
> + goto exit_probe_master_put;
> + }
> +
> pm_runtime_enable(dev);
>
> ret = spi_register_master(master);
> @@ -488,6 +505,9 @@ static int qcom_qspi_probe(struct platform_device *pdev)
> return 0;
>
> pm_runtime_disable(dev);
> + if (ctrl->has_opp_table)
> + dev_pm_opp_of_remove_table(&pdev->dev);
> + dev_pm_opp_put_clkname(ctrl->opp_table);
>
> exit_probe_master_put:
> spi_master_put(master);
> @@ -498,6 +518,11 @@ static int qcom_qspi_probe(struct platform_device *pdev)
> static int qcom_qspi_remove(struct platform_device *pdev)
> {
> struct spi_master *master = platform_get_drvdata(pdev);
> + struct qcom_qspi *ctrl = spi_master_get_devdata(master);
> +
> + if (ctrl->has_opp_table)
> + dev_pm_opp_of_remove_table(&pdev->dev);
> + dev_pm_opp_put_clkname(ctrl->opp_table);

IIUC there can still be active transfers before the controller is
unregistered. If that is correct the above should be done after the
spi_unregister_master() call below.

>
> /* Unregister _before_ disabling pm_runtime() so we stop transfers */
> spi_unregister_master(master);
> @@ -512,6 +537,8 @@ static int __maybe_unused qcom_qspi_runtime_suspend(struct device *dev)
> struct spi_master *master = dev_get_drvdata(dev);
> struct qcom_qspi *ctrl = spi_master_get_devdata(master);
>
> + /* Drop the performance state vote */
> + dev_pm_opp_set_rate(dev, 0);
> clk_bulk_disable_unprepare(QSPI_NUM_CLKS, ctrl->clks);
>
> return 0;