[patch V4 part 4 06/24] x86/entry: Convert INT3 exception to IDTENTRY_RAW

From: Thomas Gleixner
Date: Tue May 05 2020 - 10:19:54 EST


Convert #BP to IDTENTRY_RAW:
- Implement the C entry point with DEFINE_IDTENTRY_RAW
- Invoke idtentry_enter/exit() from the function body
- Emit the ASM stub with DECLARE_IDTENTRY_RAW
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototyoes

No functional change.

This could be a plain IDTENTRY, but as Peter pointed out INT3 is broken
vs. the static key in the context tracking code as this static key might be
in the state of being patched and has an int3 which would recurse forever.
IDTENTRY_RAW is therefore chosen to allow addressing this issue without
lots of code churn.

Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>

---
arch/x86/entry/entry_32.S | 7 -------
arch/x86/entry/entry_64.S | 2 --
arch/x86/include/asm/idtentry.h | 3 +++
arch/x86/include/asm/traps.h | 3 ---
arch/x86/kernel/idt.c | 2 +-
arch/x86/kernel/traps.c | 28 +++++++++++++++++-----------
arch/x86/xen/enlighten_pv.c | 2 +-
arch/x86/xen/xen-asm_64.S | 2 +-
8 files changed, 23 insertions(+), 26 deletions(-)

--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -1651,13 +1651,6 @@ SYM_CODE_START(nmi)
#endif
SYM_CODE_END(nmi)

-SYM_CODE_START(int3)
- ASM_CLAC
- pushl $0
- pushl $do_int3
- jmp common_exception
-SYM_CODE_END(int3)
-
.pushsection .text, "ax"
SYM_CODE_START(rewind_stack_do_exit)
/* Prevent any naive code from trying to unwind to our caller. */
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -1073,8 +1073,6 @@ apicinterrupt IRQ_WORK_VECTOR irq_work
* Exception entry points.
*/

-idtentry X86_TRAP_BP int3 do_int3 has_error_code=0
-
idtentry X86_TRAP_PF page_fault do_page_fault has_error_code=1

#ifdef CONFIG_X86_MCE
--- a/arch/x86/include/asm/idtentry.h
+++ b/arch/x86/include/asm/idtentry.h
@@ -181,4 +181,7 @@ DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_SS,
DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_GP, exc_general_protection);
DECLARE_IDTENTRY_ERRORCODE(X86_TRAP_AC, exc_alignment_check);

+/* Raw exception entries which need extra work */
+DECLARE_IDTENTRY_RAW(X86_TRAP_BP, exc_int3);
+
#endif
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -13,7 +13,6 @@

asmlinkage void debug(void);
asmlinkage void nmi(void);
-asmlinkage void int3(void);
#ifdef CONFIG_X86_64
asmlinkage void double_fault(void);
#endif
@@ -26,7 +25,6 @@ asmlinkage void machine_check(void);
#if defined(CONFIG_X86_64) && defined(CONFIG_XEN_PV)
asmlinkage void xen_xennmi(void);
asmlinkage void xen_xendebug(void);
-asmlinkage void xen_int3(void);
asmlinkage void xen_double_fault(void);
asmlinkage void xen_page_fault(void);
#ifdef CONFIG_X86_MCE
@@ -36,7 +34,6 @@ asmlinkage void xen_machine_check(void);

dotraplinkage void do_debug(struct pt_regs *regs, long error_code);
dotraplinkage void do_nmi(struct pt_regs *regs, long error_code);
-dotraplinkage void do_int3(struct pt_regs *regs, long error_code);
#if defined(CONFIG_X86_64) || defined(CONFIG_DOUBLEFAULT)
dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code, unsigned long cr2);
#endif
--- a/arch/x86/kernel/idt.c
+++ b/arch/x86/kernel/idt.c
@@ -57,7 +57,7 @@ struct idt_data {
*/
static const __initconst struct idt_data early_idts[] = {
INTG(X86_TRAP_DB, debug),
- SYSG(X86_TRAP_BP, int3),
+ SYSG(X86_TRAP_BP, asm_exc_int3),
#ifdef CONFIG_X86_32
INTG(X86_TRAP_PF, page_fault),
#endif
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -564,7 +564,7 @@ DEFINE_IDTENTRY_ERRORCODE(exc_general_pr
cond_local_irq_disable(regs);
}

-dotraplinkage void notrace do_int3(struct pt_regs *regs, long error_code)
+DEFINE_IDTENTRY_RAW(exc_int3)
{
/*
* poke_int3_handler() is completely self contained code; it does (and
@@ -575,16 +575,20 @@ dotraplinkage void notrace do_int3(struc
return;

/*
- * Unlike any other non-IST entry, we can be called from pretty much
- * any location in the kernel through kprobes -- text_poke() will most
- * likely be handled by poke_int3_handler() above. This means this
- * handler is effectively NMI-like.
+ * idtentry_enter() uses static_branch_{,un}likely() and therefore
+ * can trigger INT3, hence poke_int3_handler() must be done
+ * before. If the entry came from kernel mode, then use nmi_enter()
+ * because the INT3 could have been hit in any context including
+ * NMI.
*/
- if (!user_mode(regs))
+ if (user_mode(regs))
+ idtentry_enter(regs);
+ else
nmi_enter();

+ instr_begin();
#ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
- if (kgdb_ll_trap(DIE_INT3, "int3", regs, error_code, X86_TRAP_BP,
+ if (kgdb_ll_trap(DIE_INT3, "int3", regs, 0, X86_TRAP_BP,
SIGTRAP) == NOTIFY_STOP)
goto exit;
#endif /* CONFIG_KGDB_LOW_LEVEL_TRAP */
@@ -594,19 +598,21 @@ dotraplinkage void notrace do_int3(struc
goto exit;
#endif

- if (notify_die(DIE_INT3, "int3", regs, error_code, X86_TRAP_BP,
+ if (notify_die(DIE_INT3, "int3", regs, 0, X86_TRAP_BP,
SIGTRAP) == NOTIFY_STOP)
goto exit;

cond_local_irq_enable(regs);
- do_trap(X86_TRAP_BP, SIGTRAP, "int3", regs, error_code, 0, NULL);
+ do_trap(X86_TRAP_BP, SIGTRAP, "int3", regs, 0, 0, NULL);
cond_local_irq_disable(regs);

exit:
- if (!user_mode(regs))
+ instr_end();
+ if (user_mode(regs))
+ idtentry_exit(regs);
+ else
nmi_exit();
}
-NOKPROBE_SYMBOL(do_int3);

#ifdef CONFIG_X86_64
/*
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -617,7 +617,7 @@ static struct trap_array_entry trap_arra
{ machine_check, xen_machine_check, true },
#endif
{ nmi, xen_xennmi, true },
- { int3, xen_int3, false },
+ TRAP_ENTRY(exc_int3, false ),
TRAP_ENTRY(exc_overflow, false ),
#ifdef CONFIG_IA32_EMULATION
{ entry_INT80_compat, xen_entry_INT80_compat, false },
--- a/arch/x86/xen/xen-asm_64.S
+++ b/arch/x86/xen/xen-asm_64.S
@@ -31,7 +31,7 @@ SYM_CODE_END(xen_\name)
xen_pv_trap asm_exc_divide_error
xen_pv_trap debug
xen_pv_trap xendebug
-xen_pv_trap int3
+xen_pv_trap asm_exc_int3
xen_pv_trap xennmi
xen_pv_trap asm_exc_overflow
xen_pv_trap asm_exc_bounds