AW: [PATCH] net: dsa: sja1105: fix speed setting for 10 MBPS

From: Walter Harms
Date: Fri May 01 2020 - 14:00:57 EST


IMHO it would be better to use switch case here to improve readability.

switch (bmcr & mask) {

case BMCR_SPEED1000:
speed = SPEED_1000;
break;
case BMCR_SPEED100:
speed = SPEED_100;
break;
case BMCR_SPEED10:
speed = SPEED_10;
break;
default:
speed = SPEED_UNKNOWN
}

jm2c,
wh

btw: an_enabled ? why not !enabled, mich more easy to read


________________________________________
Von: kernel-janitors-owner@xxxxxxxxxxxxxxx <kernel-janitors-owner@xxxxxxxxxxxxxxx> im Auftrag von Colin King <colin.king@xxxxxxxxxxxxx>
Gesendet: Freitag, 1. Mai 2020 15:43:10
An: Vladimir Oltean; Andrew Lunn; Vivien Didelot; Florian Fainelli; David S . Miller; Russell King; linux-kernel@xxxxxxxxxxxxxxx
Cc: kernel-janitors@xxxxxxxxxxxxxxx; netdev@xxxxxxxxxxxxxxx
Betreff: [PATCH] net: dsa: sja1105: fix speed setting for 10 MBPS

From: Colin Ian King <colin.king@xxxxxxxxxxxxx>

The current logic for speed checking will never set the speed to 10 MBPS
because bmcr & BMCR_SPEED10 is always 0 since BMCR_SPEED10 is 0. Also
the erroneous setting where BMCR_SPEED1000 and BMCR_SPEED100 are both
set causes the speed to be 1000 MBS. Fix this by masking bps and checking
for just the expected settings of BMCR_SPEED1000, BMCR_SPEED100 and
BMCR_SPEED10 and defaulting to the unknown speed otherwise.

Addresses-Coverity: ("Logically dead code")
Fixes: ffe10e679cec ("net: dsa: sja1105: Add support for the SGMII port")
Signed-off-by: Colin Ian King <colin.king@xxxxxxxxxxxxx>
---
drivers/net/dsa/sja1105/sja1105_main.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 472f4eb20c49..59a9038cdc4e 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1600,6 +1600,7 @@ static const char * const sja1105_reset_reasons[] = {
int sja1105_static_config_reload(struct sja1105_private *priv,
enum sja1105_reset_reason reason)
{
+ const int mask = (BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_SPEED10);
struct ptp_system_timestamp ptp_sts_before;
struct ptp_system_timestamp ptp_sts_after;
struct sja1105_mac_config_entry *mac;
@@ -1684,14 +1685,16 @@ int sja1105_static_config_reload(struct sja1105_private *priv,
sja1105_sgmii_pcs_config(priv, an_enabled, false);

if (!an_enabled) {
- int speed = SPEED_UNKNOWN;
+ int speed;

- if (bmcr & BMCR_SPEED1000)
+ if ((bmcr & mask) == BMCR_SPEED1000)
speed = SPEED_1000;
- else if (bmcr & BMCR_SPEED100)
+ else if ((bmcr & mask) == BMCR_SPEED100)
speed = SPEED_100;
- else if (bmcr & BMCR_SPEED10)
+ else if ((bmcr & mask) == BMCR_SPEED10)
speed = SPEED_10;
+ else
+ speed = SPEED_UNKNOWN;

sja1105_sgmii_pcs_force_speed(priv, speed);
}
--
2.25.1