[PATCH v2 3/3] Bluetooth: hci_qca: allow max-speed to be set for QCA9377 devices

From: Christian Hewitt
Date: Wed Apr 22 2020 - 21:34:52 EST


Move the read of max-speed from device-tree out of the qca_is_wcn399x
if block so oper_speed can be set for QCA9377 devices as well.

Suggested-by: Abhishek Pandit-Subedi <abhishekpandit@xxxxxxxxxxxx>
Signed-off-by: Christian Hewitt <christianshewitt@xxxxxxxxx>
---
drivers/bluetooth/hci_qca.c | 16 +++++++++-------
1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 072983dc07e3..b3fd07a6f812 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -597,10 +597,12 @@ static int qca_open(struct hci_uart *hu)

if (hu->serdev) {
qcadev = serdev_device_get_drvdata(hu->serdev);
- if (qca_is_wcn399x(qcadev->btsoc_type)) {
+
+ if (qca_is_wcn399x(qcadev->btsoc_type))
hu->init_speed = qcadev->init_speed;
+
+ if (qcadev->oper_speed)
hu->oper_speed = qcadev->oper_speed;
- }
}

timer_setup(&qca->wake_retrans_timer, hci_ibs_wake_retrans_timeout, 0);
@@ -1871,6 +1873,11 @@ static int qca_serdev_probe(struct serdev_device *serdev)
serdev_device_set_drvdata(serdev, qcadev);
device_property_read_string(&serdev->dev, "firmware-name",
&qcadev->firmware_name);
+ device_property_read_u32(&serdev->dev, "max-speed",
+ &qcadev->oper_speed);
+ if (!qcadev->oper_speed)
+ BT_DBG("UART will pick default operating speed");
+
if (data && qca_is_wcn399x(data->soc_type)) {
qcadev->btsoc_type = data->soc_type;
qcadev->bt_power = devm_kzalloc(&serdev->dev,
@@ -1895,11 +1902,6 @@ static int qca_serdev_probe(struct serdev_device *serdev)
return PTR_ERR(qcadev->susclk);
}

- device_property_read_u32(&serdev->dev, "max-speed",
- &qcadev->oper_speed);
- if (!qcadev->oper_speed)
- BT_DBG("UART will pick default operating speed");
-
err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
if (err) {
BT_ERR("wcn3990 serdev registration failed");
--
2.17.1