Re: [PATCH] i2c: powermac: Simplify reading the "reg" and "i2c-address" property

From: Erhard F.
Date: Wed Apr 22 2020 - 17:07:31 EST


On Tue, 21 Apr 2020 11:37:13 +0200
Wolfram Sang <wsa@xxxxxxxxxxxxx> wrote:

> On Wed, Apr 15, 2020 at 06:49:14PM +0530, Aishwarya R wrote:
> > >> Use of_property_read_u32 to read the "reg" and "i2c-address" property
> > >> instead of using of_get_property to check the return values.
> > >>
> > >> Signed-off-by: Aishwarya R <aishwaryarj100@xxxxxxxxx>
> >
> > > This is quite a fragile driver. Have you tested it on HW?
> >
> > This change is not tested with the Hardware.
> > But of_property_read_u32 is better here than generic of_get_property.
> > This make sure that value read properly independent of system endianess.
>
> This driver is only used on PPC_BE. And it is *very* fragile. The gain
> is not enough for me to accept it without testing. Maybe Erhard (CCed)
> is interested. If not, you may find someone on the ppc lists.
>

I applied the patch on top of kernel 5.6.6 and tested it on a PowerMac G4 3,6 DP and a PowerMac G5 11,2. Both machines run without anything suspicious going on. dmesg | grep i2c looks the same with patch and without patch.

Tested-by: Erhard Furtner <erhard_f@xxxxxxxxxxx>