Re: [PATCH v2 0/2] Add a watchdog driver that uses ARM Secure Monitor Calls.

[Guenter Roeck]

On 4/21/20 4:05 AM, Evan Benn wrote:
> This is currently supported in firmware deployed on oak, hana and elm mt8173
> chromebook devices. The kernel driver is written to be a generic SMC
> watchdog driver.
> 
> Arm Trusted Firmware upstreaming review:
>     https://review.trustedfirmware.org/c/TF-A/trusted-firmware-a/+/3405
> 
> Patch to add oak, hana, elm device tree:
>     https://lore.kernel.org/linux-arm-kernel/20200110073730.213789-1-hsinyi@xxxxxxxxxxxx/
> I would like to add the device tree support after the above patch is
> accepted.
> 
> Changes in v4:
> - Add arm,smc-id property
> - Get smc-id from of property
> - Return a1 instead of a0 in timeleft
> 
Subject says v2. This is confusing, at the very least.

Guenter

> Changes in v3:
> - Change name back to arm
> - Add optional get_timeleft op
> - change name to arm_smc_wdt
> 
> Changes in v2:
> - Change name arm > mt8173
> - use watchdog_stop_on_reboot
> - use watchdog_stop_on_unregister
> - use devm_watchdog_register_device
> - remove smcwd_shutdown, smcwd_remove
> - change error codes
> 
> Evan Benn (1):
>   dt-bindings: watchdog: Add ARM smc wdt for mt8173 watchdog
> 
> Julius Werner (1):
>   watchdog: Add new arm_smc_wdt watchdog driver
> 
>  .../bindings/watchdog/arm-smc-wdt.yaml        |  36 ++++
>  MAINTAINERS                                   |   7 +
>  arch/arm64/configs/defconfig                  |   1 +
>  drivers/watchdog/Kconfig                      |  13 ++
>  drivers/watchdog/Makefile                     |   1 +
>  drivers/watchdog/arm_smc_wdt.c                | 194 ++++++++++++++++++
>  6 files changed, 252 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/arm-smc-wdt.yaml
>  create mode 100644 drivers/watchdog/arm_smc_wdt.c
>