Re: [PATCH v2 4/7] ASoC: sun4i-i2s: Set sign extend sample

From: Maxime Ripard
Date: Tue Apr 21 2020 - 04:51:01 EST


On Mon, Apr 20, 2020 at 02:56:31PM +0200, Clément Péron wrote:
> On Mon, 20 Apr 2020 at 14:44, Maxime Ripard <maxime@xxxxxxxxxx> wrote:
> >
> > On Sun, Apr 19, 2020 at 12:44:32AM +0200, Clément Péron wrote:
> > > From: Marcus Cooper <codekipper@xxxxxxxxx>
> > >
> > > On the newer SoCs such as the H3 and A64 this is set by default
> > > to transfer a 0 after each sample in each slot. However the A10
> > > and A20 SoCs that this driver was developed on had a default
> > > setting where it padded the audio gain with zeros.
> > >
> > > This isn't a problem whilst we have only support for 16bit audio
> > > but with larger sample resolution rates in the pipeline then SEXT
> > > bits should be cleared so that they also pad at the LSB. Without
> > > this the audio gets distorted.
> > >
> > > Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx>
> > > Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
> > > ---
> > > sound/soc/sunxi/sun4i-i2s.c | 22 ++++++++++++++++++++++
> > > 1 file changed, 22 insertions(+)
> > >
> > > diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> > > index a23c9f2a3f8c..618bbc5156f1 100644
> > > --- a/sound/soc/sunxi/sun4i-i2s.c
> > > +++ b/sound/soc/sunxi/sun4i-i2s.c
> > > @@ -48,6 +48,9 @@
> > > #define SUN4I_I2S_FMT0_FMT_I2S (0 << 0)
> > >
> > > #define SUN4I_I2S_FMT1_REG 0x08
> > > +#define SUN4I_I2S_FMT1_REG_SEXT_MASK BIT(8)
> > > +#define SUN4I_I2S_FMT1_REG_SEXT(sext) ((sext) << 8)
> > > +
> > > #define SUN4I_I2S_FIFO_TX_REG 0x0c
> > > #define SUN4I_I2S_FIFO_RX_REG 0x10
> > >
> > > @@ -105,6 +108,9 @@
> > > #define SUN8I_I2S_FMT0_BCLK_POLARITY_INVERTED (1 << 7)
> > > #define SUN8I_I2S_FMT0_BCLK_POLARITY_NORMAL (0 << 7)
> > >
> > > +#define SUN8I_I2S_FMT1_REG_SEXT_MASK GENMASK(5,4)
> > > +#define SUN8I_I2S_FMT1_REG_SEXT(sext) ((sext) << 4)
> > > +
> > > #define SUN8I_I2S_INT_STA_REG 0x0c
> > > #define SUN8I_I2S_FIFO_TX_REG 0x20
> > >
> > > @@ -663,6 +669,12 @@ static int sun4i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
> > > }
> > > regmap_update_bits(i2s->regmap, SUN4I_I2S_CTRL_REG,
> > > SUN4I_I2S_CTRL_MODE_MASK, val);
> > > +
> > > + /* Set sign extension to pad out LSB with 0 */
> > > + regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
> > > + SUN4I_I2S_FMT1_REG_SEXT_MASK,
> > > + SUN4I_I2S_FMT1_REG_SEXT(0));
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -765,6 +777,11 @@ static int sun8i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
> > > SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
> > > val);
> > >
> > > + /* Set sign extension to pad out LSB with 0 */
> > > + regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
> > > + SUN8I_I2S_FMT1_REG_SEXT_MASK,
> > > + SUN8I_I2S_FMT1_REG_SEXT(0));
> > > +
> > > return 0;
> > > }
> > >
> > > @@ -867,6 +884,11 @@ static int sun50i_i2s_set_soc_fmt(const struct sun4i_i2s *i2s,
> > > SUN8I_I2S_CTRL_BCLK_OUT | SUN8I_I2S_CTRL_LRCK_OUT,
> > > val);
> > >
> > > + /* Set sign extension to pad out LSB with 0 */
> > > + regmap_update_bits(i2s->regmap, SUN4I_I2S_FMT1_REG,
> > > + SUN8I_I2S_FMT1_REG_SEXT_MASK,
> > > + SUN8I_I2S_FMT1_REG_SEXT(0));
> > > +
> >
> > If this is an issue only on the A10 / A20, why are you setting it up on the
> > other generations too?
>
> To keep coherency between all set_soc_format(), and also avoid this
> kind of issue for future generation.
> As this doesn't cost much after all, and it avoid to rely on default,
> but what do you think ?

It makes sense, but it should be in the commit log ;)

Maxime

Attachment: signature.asc
Description: PGP signature