Re: [PATCH v4 4/5] iio: vcnl4000: Export near level property for proximity sensor

From: Jonathan Cameron
Date: Sat Apr 18 2020 - 14:05:15 EST


On Sun, 5 Apr 2020 15:50:31 +0200
Guido GÃnther <agx@xxxxxxxxxxx> wrote:

> When an object can be considered close to the sensor is hardware
> dependent. Allowing to configure the property via device tree
> allows to configure this device specific value.
>
> This is useful for e.g. iio-sensor-proxy to indicate to userspace
> if an object is close to the sensor.
>
> Signed-off-by: Guido GÃnther <agx@xxxxxxxxxxx>
Applied. Thanks,
> ---
> drivers/iio/light/vcnl4000.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
> index ec803c1e81df..985cc39ede8e 100644
> --- a/drivers/iio/light/vcnl4000.c
> +++ b/drivers/iio/light/vcnl4000.c
> @@ -83,6 +83,7 @@ struct vcnl4000_data {
> struct mutex vcnl4000_lock;
> struct vcnl4200_channel vcnl4200_al;
> struct vcnl4200_channel vcnl4200_ps;
> + uint32_t near_level;
> };
>
> struct vcnl4000_chip_spec {
> @@ -343,6 +344,25 @@ static const struct vcnl4000_chip_spec vcnl4000_chip_spec_cfg[] = {
> },
> };
>
> +static ssize_t vcnl4000_read_near_level(struct iio_dev *indio_dev,
> + uintptr_t priv,
> + const struct iio_chan_spec *chan,
> + char *buf)
> +{
> + struct vcnl4000_data *data = iio_priv(indio_dev);
> +
> + return sprintf(buf, "%u\n", data->near_level);
> +}
> +
> +static const struct iio_chan_spec_ext_info vcnl4000_ext_info[] = {
> + {
> + .name = "nearlevel",
> + .shared = IIO_SEPARATE,
> + .read = vcnl4000_read_near_level,
> + },
> + { /* sentinel */ }
> +};
> +
> static const struct iio_chan_spec vcnl4000_channels[] = {
> {
> .type = IIO_LIGHT,
> @@ -351,6 +371,7 @@ static const struct iio_chan_spec vcnl4000_channels[] = {
> }, {
> .type = IIO_PROXIMITY,
> .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
> + .ext_info = vcnl4000_ext_info,
> }
> };
>
> @@ -440,6 +461,10 @@ static int vcnl4000_probe(struct i2c_client *client,
> dev_dbg(&client->dev, "%s Ambient light/proximity sensor, Rev: %02x\n",
> data->chip_spec->prod, data->rev);
>
> + if (device_property_read_u32(&client->dev, "proximity-near-level",
> + &data->near_level))
> + data->near_level = 0;
> +
> indio_dev->dev.parent = &client->dev;
> indio_dev->info = &vcnl4000_info;
> indio_dev->channels = vcnl4000_channels;