Re: [PATCH v8 1/3] dt-bindings: mfd: Add Gateworks System Controller bindings

[Lee Jones]

On Fri, 27 Mar 2020, Tim Harvey wrote:

> This patch adds documentation of device-tree bindings for the
> Gateworks System Controller (GSC).
> 
> Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
> ---
> v8:
>  - add register to fan-controller node name
> 
> v7:
>  - change divider from mili-ohms to ohms
>  - add constraints for voltage divider and offset
>  - remove unnecessary ref for offset
>  - renamed fan to fan-controller and changed base prop to reg
> 
> v6:
>  - fix typo
>  - drop invalid description from #interrupt-cells property
>  - fix adc pattern property
>  - add unit suffix
>  - replace hwmon/adc with adc/channel
>  - changed adc type to mode and enum int
>  - add unit suffix and drop ref for voltage-divider
>  - moved fan to its own subnode with base register
> 
> v5:
>  - resolve dt_binding_check issues
> 
> v4:
>  - move to using pwm<n>_auto_point<m>_{pwm,temp} for FAN PWM
>  - remove unncessary resolution/scaling properties for ADCs
>  - update to yaml
>  - remove watchdog
> 
> v3:
>  - replaced _ with -
>  - remove input bindings
>  - added full description of hwmon
>  - fix unit address of hwmon child nodes
> ---
>  .../devicetree/bindings/mfd/gateworks-gsc.yaml     | 194 +++++++++++++++++++++
>  1 file changed, 194 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> new file mode 100644
> index 00000000..a96751c9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
> @@ -0,0 +1,194 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Gateworks System Controller multi-function device

I'd prefer if you didn't use Linuxisums in DT docs.

A 'multi-function device' isn't a thing - we made it up.

Nowhere in the documentation [0] is the Gateworks System Controller
described as a multi-function device.

[0] http://trac.gateworks.com/wiki/gsc

> +description: |
> +  The GSC is a Multifunction I2C slave device with the following submodules:

No it isn't.  It's a:

  "The Gateworks System Controller (GSC) is a device present across
   various Gateworks product families that provides a set of system
   related feature such as the following (refer to the board hardware
   user manuals to see what features are present)"

> +   - Watchdog Timer
> +   - GPIO
> +   - Pushbutton controller
> +   - Hardware Monitor with ADC's for temperature and voltage rails and
> +     fan controller

Why is "Monitor" capitalised, but "controller" is not?

I would s/Monitor/monitor/ here.

> +maintainers:
> +  - Tim Harvey <tharvey@xxxxxxxxxxxxx>
> +  - Robert Jones <rjones@xxxxxxxxxxxxx>
> +
> +properties:
> +  $nodename:
> +    pattern: "gsc@[0-9a-f]{1,2}"
> +  compatible:
> +    const: gw,gsc
> +
> +  reg:
> +    description: I2C device address
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  adc:
> +    type: object
> +    description: Optional Hardware Monitoring module

Again, an odd thing to capitalise.

> +    properties:
> +      compatible:
> +        const: gw,gsc-adc
> +
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +    patternProperties:
> +      "^channel@[0-9]+$":
> +        type: object
> +        description: |
> +          Properties for a single ADC which can report cooked values
> +          (ie temperature sensor based on thermister), raw values
> +          (ie voltage rail with a pre-scaling resistor divider).

/ie/i.e./

> +        properties:
> +          reg:
> +            description: Register of the ADC
> +            maxItems: 1
> +
> +          label:
> +            description: Name of the ADC input
> +
> +          gw,mode:
> +            description: |
> +              conversion mode:
> +                0 - temperature, in C*10
> +                1 - pre-scaled voltage value
> +                2 - scaled voltage based on an optional resistor divider
> +                    and optional offset
> +            allOf:
> +              - $ref: /schemas/types.yaml#/definitions/uint32

Rob just submitted a patch-set to remove 'allOf's from '$ref'
properties.

> +            enum: [0, 1, 2]
> +
> +          gw,voltage-divider-ohms:
> +            description: values of resistors for divider on raw ADC input

s/values/Values/

> +            maxItems: 2
> +            items:
> +             minimum: 1000
> +             maximum: 1000000
> +
> +          gw,voltage-offset-microvolt:
> +            description: |
> +              A positive voltage offset to apply to a raw ADC
> +              (ie to compensate for a diode drop).

s/ie/i.e/

> +            minimum: 0
> +            maximum: 1000000
> +
> +        required:
> +          - gw,mode
> +          - reg
> +          - label
> +
> +    required:
> +      - compatible
> +      - "#address-cells"
> +      - "#size-cells"
> +
> +patternProperties:
> +  "^fan-controller@[0-9a-f]+$":
> +    type: object
> +    description: Optional FAN controller

"Fan"

> +    properties:
> +      compatible:
> +        const: gw,gsc-fan
> +
> +      "#address-cells":
> +        const: 1
> +
> +      "#size-cells":
> +        const: 0
> +
> +      reg:
> +        description: The fan controller base address
> +        maxItems: 1
> +
> +    required:
> +      - compatible
> +      - reg
> +      - "#address-cells"
> +      - "#size-cells"
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        gsc@20 {
> +            compatible = "gw,gsc";
> +            reg = <0x20>;
> +            interrupt-parent = <&gpio1>;
> +            interrupts = <4 GPIO_ACTIVE_LOW>;
> +            interrupt-controller;
> +            #interrupt-cells = <1>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            adc {
> +                compatible = "gw,gsc-adc";
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +
> +                channel@0 { /* A0: Board Temperature */
> +                    reg = <0x00>;
> +                    label = "temp";
> +                    gw,mode = <0>;
> +                };
> +
> +                channel@2 { /* A1: Input Voltage (raw ADC) */
> +                    reg = <0x02>;
> +                    label = "vdd_vin";
> +                    gw,mode = <1>;
> +                    gw,voltage-divider-ohms = <22100 1000>;
> +                    gw,voltage-offset-microvolt = <800000>;
> +                };
> +
> +                channel@b { /* A2: Battery voltage */
> +                    reg = <0x0b>;
> +                    label = "vdd_bat";
> +                    gw,mode = <1>;
> +                };
> +            };
> +
> +            fan-controller@2c {
> +                #address-cells = <1>;
> +                #size-cells = <0>;
> +                compatible = "gw,gsc-fan";
> +                reg = <0x2c>;
> +            };
> +        };
> +    };

-- 
Lee Jones [æçæ]
Linaro Services Technical Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog