Re: [PATCH v2 1/7] drm/bridge: ps8640: Get the EDID from eDP control

From: Laurent Pinchart
Date: Thu Apr 16 2020 - 13:22:35 EST


Hi Enric,

Thank you for the patch.

On Thu, Apr 16, 2020 at 05:57:13PM +0200, Enric Balletbo i Serra wrote:
> The PS8640 DSI-to-eDP bridge can retrieve the EDID, so implement the
> .get_edid callback and set the flag to indicate the core to use it.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> ---
>
> Changes in v2: None
>
> drivers/gpu/drm/bridge/parade-ps8640.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/parade-ps8640.c b/drivers/gpu/drm/bridge/parade-ps8640.c
> index d3a53442d449..956b76e0a44d 100644
> --- a/drivers/gpu/drm/bridge/parade-ps8640.c
> +++ b/drivers/gpu/drm/bridge/parade-ps8640.c
> @@ -242,8 +242,18 @@ static int ps8640_bridge_attach(struct drm_bridge *bridge,
> return ret;
> }
>
> +static struct edid *ps8640_bridge_get_edid(struct drm_bridge *bridge,
> + struct drm_connector *connector)
> +{
> + struct ps8640 *ps_bridge = bridge_to_ps8640(bridge);
> +
> + return drm_get_edid(connector,
> + ps_bridge->page[PAGE0_DP_CNTL]->adapter);

This will only work if the DDC signals are connected to the PS8640
(quite obviously). Is that guaranteed, or could some systems connect
them directory to an SoC I2C controller ? In the latter case we would
have to report this in the DT bindings of the PS8640. That's not
blocking for this patch, I am just wondering, as I would have expected
the driver to already expose EDID one way or another if this was
available and used.

Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

> +}
> +
> static const struct drm_bridge_funcs ps8640_bridge_funcs = {
> .attach = ps8640_bridge_attach,
> + .get_edid = ps8640_bridge_get_edid,
> .post_disable = ps8640_post_disable,
> .pre_enable = ps8640_pre_enable,
> };
> @@ -296,6 +306,8 @@ static int ps8640_probe(struct i2c_client *client)
>
> ps_bridge->bridge.funcs = &ps8640_bridge_funcs;
> ps_bridge->bridge.of_node = dev->of_node;
> + ps_bridge->bridge.ops = DRM_BRIDGE_OP_EDID;
> + ps_bridge->bridge.type = DRM_MODE_CONNECTOR_eDP;
>
> ps_bridge->page[PAGE0_DP_CNTL] = client;
>

--
Regards,

Laurent Pinchart