[PATCH v3 8/8] scsi: ufs-mediatek: customize the delay for host enabling

[Stanley Chu]

MediaTek platform and UFS controller can dynamically customize
the delay for host enabling according to different scenarios.

For example, for host initialization with low-level MPHY calibration
required, longer delay shall be expected. But the delay could be removed
if such MPHY calibration can be skipped, like resume flow.

Signed-off-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
---
 drivers/scsi/ufs/ufs-mediatek.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index 0ff6781654fd..6f437f0091bf 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -71,6 +71,19 @@ static void ufs_mtk_cfg_unipro_cg(struct ufs_hba *hba, bool enable)
 	}
 }
 
+static int ufs_mtk_hce_enable_notify(struct ufs_hba *hba,
+				     enum ufs_notify_change_status status)
+{
+	if (status == PRE_CHANGE) {
+		if (hba->pm_op_in_progress)
+			hba->hba_enable_delay_us = 0;
+		else
+			hba->hba_enable_delay_us = 100;
+	}
+
+	return 0;
+}
+
 static int ufs_mtk_bind_mphy(struct ufs_hba *hba)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
@@ -552,6 +565,7 @@ static struct ufs_hba_variant_ops ufs_hba_mtk_vops = {
 	.name                = "mediatek.ufshci",
 	.init                = ufs_mtk_init,
 	.setup_clocks        = ufs_mtk_setup_clocks,
+	.hce_enable_notify   = ufs_mtk_hce_enable_notify,
 	.link_startup_notify = ufs_mtk_link_startup_notify,
 	.pwr_change_notify   = ufs_mtk_pwr_change_notify,
 	.apply_dev_quirks    = ufs_mtk_apply_dev_quirks,
-- 
2.18.0