[PATCH v3 2/5] usb: musb: jz4740: Add support for DMA

From: Paul Cercueil
Date: Wed Mar 11 2020 - 09:51:53 EST


Add support for using the DMA channels built into the Inventra IP.

Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
Tested-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
---

Notes:
v2-v3: No change

drivers/usb/musb/Kconfig | 2 +-
drivers/usb/musb/jz4740.c | 20 ++++++++++++++------
2 files changed, 15 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index eb2ded1026ee..c4b349e074c1 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -144,7 +144,7 @@ config USB_UX500_DMA

config USB_INVENTRA_DMA
bool 'Inventra'
- depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK
+ depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK || USB_MUSB_JZ4740
help
Enable DMA transfers using Mentor's engine.

diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index bc0109f4700b..aa32b5af0c1f 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -24,11 +24,14 @@ struct jz4740_glue {
static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)
{
unsigned long flags;
- irqreturn_t retval = IRQ_NONE;
+ irqreturn_t retval = IRQ_NONE, retval_dma = IRQ_NONE;
struct musb *musb = __hci;

spin_lock_irqsave(&musb->lock, flags);

+ if (IS_ENABLED(CONFIG_USB_INVENTRA_DMA) && musb->dma_controller)
+ retval_dma = dma_controller_irq(irq, musb->dma_controller);
+
musb->int_usb = musb_readb(musb->mregs, MUSB_INTRUSB);
musb->int_tx = musb_readw(musb->mregs, MUSB_INTRTX);
musb->int_rx = musb_readw(musb->mregs, MUSB_INTRRX);
@@ -46,7 +49,10 @@ static irqreturn_t jz4740_musb_interrupt(int irq, void *__hci)

spin_unlock_irqrestore(&musb->lock, flags);

- return retval;
+ if (retval == IRQ_HANDLED || retval_dma == IRQ_HANDLED)
+ return IRQ_HANDLED;
+
+ return IRQ_NONE;
}

static struct musb_fifo_cfg jz4740_musb_fifo_cfg[] = {
@@ -93,14 +99,14 @@ static int jz4740_musb_init(struct musb *musb)
return 0;
}

-/*
- * DMA has not been confirmed to work with CONFIG_USB_INVENTRA_DMA,
- * so let's not set up the dma function pointers yet.
- */
static const struct musb_platform_ops jz4740_musb_ops = {
.quirks = MUSB_DMA_INVENTRA | MUSB_INDEXED_EP,
.fifo_mode = 2,
.init = jz4740_musb_init,
+#ifdef CONFIG_USB_INVENTRA_DMA
+ .dma_init = musbhs_dma_controller_create_noirq,
+ .dma_exit = musbhs_dma_controller_destroy,
+#endif
};

static const struct musb_hdrc_platform_data jz4740_musb_pdata = {
@@ -142,6 +148,8 @@ static int jz4740_probe(struct platform_device *pdev)
}

musb->dev.parent = dev;
+ musb->dev.dma_mask = &musb->dev.coherent_dma_mask;
+ musb->dev.coherent_dma_mask = DMA_BIT_MASK(32);

glue->pdev = musb;
glue->clk = clk;
--
2.25.1