Re: [patch part-II V2 12/13] x86/entry: Move irq flags tracing to prepare_exit_to_usermode()

From: Alexandre Chartre
Date: Tue Mar 10 2020 - 10:04:31 EST



On 3/8/20 11:24 PM, Thomas Gleixner wrote:
This is another step towards more C-code and less convoluted ASM.

Note, that trace_hardirqs_on() is still incorrect vs. RCU idle when the
tracepoint is used by e.g. BPF. Will be addressed in the next step.

Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
---

V2: New patch simplifying the conversion and addressing Alex' review
comment of redundant tracing.
---
arch/x86/entry/common.c | 1 +
arch/x86/entry/entry_32.S | 12 ++++--------
arch/x86/entry/entry_64.S | 4 ----
arch/x86/entry/entry_64_compat.S | 14 +++++---------
4 files changed, 10 insertions(+), 21 deletions(-)


Reviewed-by: Alexandre Chartre <alexandre.chartre@xxxxxxxxxx>

alex.

--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -253,6 +253,7 @@ static noinline void __prepare_exit_to_u
user_enter_irqoff();
mds_user_clear_cpu_buffers();
+ trace_hardirqs_on();
}
NOKPROBE_SYMBOL(prepare_exit_to_usermode);
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -811,8 +811,7 @@ SYM_CODE_START(ret_from_fork)
/* When we fork, we trace the syscall return in the child, too. */
movl %esp, %eax
call syscall_return_slowpath
- STACKLEAK_ERASE
- jmp restore_all
+ jmp .Lsyscall_32_done
/* kernel thread */
1: movl %edi, %eax
@@ -855,7 +854,7 @@ SYM_CODE_START_LOCAL(ret_from_exception)
TRACE_IRQS_OFF
movl %esp, %eax
call prepare_exit_to_usermode
- jmp restore_all
+ jmp restore_all_switch_stack
SYM_CODE_END(ret_from_exception)
SYM_ENTRY(__begin_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
@@ -968,8 +967,7 @@ SYM_FUNC_START(entry_SYSENTER_32)
STACKLEAK_ERASE
-/* Opportunistic SYSEXIT */
- TRACE_IRQS_ON /* User mode traces as IRQs on. */
+ /* Opportunistic SYSEXIT */
/*
* Setup entry stack - we keep the pointer in %eax and do the
@@ -1072,11 +1070,9 @@ SYM_FUNC_START(entry_INT80_32)
movl %esp, %eax
call do_int80_syscall_32
.Lsyscall_32_done:
-
STACKLEAK_ERASE
-restore_all:
- TRACE_IRQS_ON
+restore_all_switch_stack:
SWITCH_TO_ENTRY_STACK
CHECK_AND_APPLY_ESPFIX
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -172,8 +172,6 @@ SYM_INNER_LABEL(entry_SYSCALL_64_after_h
movq %rsp, %rsi
call do_syscall_64 /* returns with IRQs disabled */
- TRACE_IRQS_ON /* return enables interrupts */
-
/*
* Try to use SYSRET instead of IRET if we're returning to
* a completely clean 64-bit userspace context. If we're not,
@@ -340,7 +338,6 @@ SYM_CODE_START(ret_from_fork)
UNWIND_HINT_REGS
movq %rsp, %rdi
call syscall_return_slowpath /* returns with IRQs disabled */
- TRACE_IRQS_ON /* user mode is traced as IRQS on */
jmp swapgs_restore_regs_and_return_to_usermode
1:
@@ -617,7 +614,6 @@ SYM_CODE_START_LOCAL(common_interrupt)
.Lretint_user:
mov %rsp,%rdi
call prepare_exit_to_usermode
- TRACE_IRQS_ON
SYM_INNER_LABEL(swapgs_restore_regs_and_return_to_usermode, SYM_L_GLOBAL)
#ifdef CONFIG_DEBUG_ENTRY
--- a/arch/x86/entry/entry_64_compat.S
+++ b/arch/x86/entry/entry_64_compat.S
@@ -132,8 +132,8 @@ SYM_FUNC_START(entry_SYSENTER_compat)
movq %rsp, %rdi
call do_fast_syscall_32
/* XEN PV guests always use IRET path */
- ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \
- "jmp .Lsyscall_32_done", X86_FEATURE_XENPV
+ ALTERNATIVE "testl %eax, %eax; jz swapgs_restore_regs_and_return_to_usermode", \
+ "jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV
jmp sysret32_from_system_call
.Lsysenter_fix_flags:
@@ -244,8 +244,8 @@ SYM_INNER_LABEL(entry_SYSCALL_compat_aft
movq %rsp, %rdi
call do_fast_syscall_32
/* XEN PV guests always use IRET path */
- ALTERNATIVE "testl %eax, %eax; jz .Lsyscall_32_done", \
- "jmp .Lsyscall_32_done", X86_FEATURE_XENPV
+ ALTERNATIVE "testl %eax, %eax; jz swapgs_restore_regs_and_return_to_usermode", \
+ "jmp swapgs_restore_regs_and_return_to_usermode", X86_FEATURE_XENPV
/* Opportunistic SYSRET */
sysret32_from_system_call:
@@ -254,7 +254,7 @@ SYM_INNER_LABEL(entry_SYSCALL_compat_aft
* stack. So let's erase the thread stack right now.
*/
STACKLEAK_ERASE
- TRACE_IRQS_ON /* User mode traces as IRQs on. */
+
movq RBX(%rsp), %rbx /* pt_regs->rbx */
movq RBP(%rsp), %rbp /* pt_regs->rbp */
movq EFLAGS(%rsp), %r11 /* pt_regs->flags (in r11) */
@@ -393,9 +393,5 @@ SYM_CODE_START(entry_INT80_compat)
movq %rsp, %rdi
call do_int80_syscall_32
-.Lsyscall_32_done:
-
- /* Go back to user mode. */
- TRACE_IRQS_ON
jmp swapgs_restore_regs_and_return_to_usermode
SYM_CODE_END(entry_INT80_compat)