Re: åå:[PATCH 1/6] PCI: Add Loongson vendor ID and 7A1000 device IDs

From: Tiezhu Yang
Date: Tue Mar 10 2020 - 05:28:42 EST


On 03/10/2020 10:37 AM, Jiaxun Yang wrote:

ä 2020å3æ10æ GMT+08:00 äå10:31:56, Tiezhu Yang <yangtiezhu@xxxxxxxxxxx> åå:
On 03/09/2020 04:50 PM, Jiaxun Yang wrote:
---- å ææä, 2020-03-09 16:23:21 Tiezhu Yang
<yangtiezhu@xxxxxxxxxxx> æå ----
> Add the Loongson vendor ID and 7A1000 device IDs to pci_ids.h
> to be used by the controller driver in the future.
>
> The Loongson IDs can be found at the following link:
>
https://git.kernel.org/pub/scm/utils/pciutils/pciutils.git/tree/pci.ids
>
> Signed-off-by: Tiezhu Yang <yangtiezhu@xxxxxxxxxxx>
> ---
> include/linux/pci_ids.h | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
> index 352c0d7..0125ab4 100644
> --- a/include/linux/pci_ids.h
> +++ b/include/linux/pci_ids.h
> @@ -3113,4 +3113,22 @@
>
> #define PCI_VENDOR_ID_NCUBE 0x10ff
>
> +#define PCI_VENDOR_ID_LOONGSON 0x0014
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_HT 0x7a00
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_APB 0x7a02
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_GMAC 0x7a03
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_OTG 0x7a04
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_DC 0x7a06
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_HDA 0x7a07
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_SATA 0x7a08
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_PCIE_X1 0x7a09
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_SPI 0x7a0b
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_LPC 0x7a0c
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_DMA 0x7a0f
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_EHCI 0x7a14
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_GPU 0x7a15
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_PCIE_X4 0x7a19
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_OHCI 0x7a24
> +#define PCI_DEVICE_ID_LOONGSON_7A1000_PCIE_X8 0x7a29

Devices IDs are unlikely to be reused by mutiple subsystems, so
probably we don't need
to add them here?
Hi Jiaxun,

I think it is better to define the device IDs in pci_ids.h,
otherwise it seems a little disorganized.
Please read the comment at the start of this file.
New entries should be added only if they're shared by multiple drivers.

That's the rule.

And probably you can split these two patches into a new series
as they're likely to be accepted.

OK, that makes sense.

Let me split the two patches 1/6 and 2/6 into a new series,
the first patch only adds the Loongson vendor ID to pci_ids.h.

Thanks,

Tiezhu Yang


Thanks.

Thanks,

Tiezhu Yang

+
> #endif /* _LINUX_PCI_IDS_H */
> --
> 2.1.0
>
>