[PATCH 3/3] remoteproc: qcom_q6v5_mss: Request direct mapping for firmware subdevice

From: Sibi Sankar
Date: Mon Mar 09 2020 - 14:23:39 EST


The Q6 modem sub-system has direct access to DDR through memnoc and
an indirect access routed through a SMMU which MSS CE (crypto engine
sub-component of MSS) uses during out of reset sequence. Request direct
mapping for the modem-firmware subdevice since smmu is not expected
to provide access control/translation for these SIDs (sandboxing of the
modem is achieved through XPUs engaged using SMC calls).

Signed-off-by: Sibi Sankar <sibis@xxxxxxxxxxxxxx>
---
drivers/remoteproc/qcom_q6v5_mss.c | 68 ++++++++++++++++++++++++++++++
1 file changed, 68 insertions(+)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index d7667418a62f4..ceb7f71dd17df 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -10,6 +10,7 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
+#include <linux/iommu.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
@@ -202,6 +203,7 @@ struct q6v5 {
struct qcom_rproc_subdev smd_subdev;
struct qcom_rproc_ssr ssr_subdev;
struct qcom_sysmon *sysmon;
+ struct device *fw_subdev;
bool need_mem_protection;
bool has_alt_reset;
bool has_halt_nav;
@@ -378,6 +380,67 @@ static void q6v5_pds_disable(struct q6v5 *qproc, struct device **pds,
}
}

+static int qcom_init_firmware(struct q6v5 *qproc)
+{
+ struct platform_device_info info;
+ struct platform_device *pdev;
+ struct device_node *np;
+ int ret;
+
+ np = of_get_child_by_name(qproc->dev->of_node, "modem-firmware");
+ if (!np)
+ return 0;
+
+ memset(&info, 0, sizeof(info));
+ info.fwnode = &np->fwnode;
+ info.parent = qproc->dev;
+ info.name = np->name;
+
+ pdev = platform_device_register_full(&info);
+ if (IS_ERR(pdev)) {
+ of_node_put(np);
+ return PTR_ERR(pdev);
+ }
+
+ pdev->dev.of_node = np;
+ ret = of_dma_configure(&pdev->dev, np, true);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to configure DMA\n");
+ goto err_unregister;
+ }
+
+ ret = iommu_request_dm_for_dev(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to request direct mapping\n");
+ goto err_unregister;
+ }
+
+ qproc->fw_subdev = &pdev->dev;
+ of_node_put(np);
+ return 0;
+
+err_unregister:
+ platform_device_unregister(pdev);
+ of_node_put(np);
+ return ret;
+}
+
+static void qcom_remove_firmware(struct q6v5 *qproc)
+{
+ struct iommu_domain *iommu;
+
+ if (!qproc->fw_subdev)
+ return;
+
+ iommu = iommu_get_domain_for_dev(qproc->fw_subdev);
+ if (!iommu)
+ return;
+
+ iommu_detach_device(iommu, qproc->fw_subdev);
+ iommu_domain_free(iommu);
+ platform_device_unregister(to_platform_device(qproc->fw_subdev));
+}
+
static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm,
bool local, bool remote, phys_addr_t addr,
size_t size)
@@ -1722,6 +1785,10 @@ static int q6v5_probe(struct platform_device *pdev)
if (ret)
goto detach_proxy_pds;

+ ret = qcom_init_firmware(qproc);
+ if (ret)
+ goto detach_proxy_pds;
+
qproc->mpss_perm = BIT(QCOM_SCM_VMID_HLOS);
qproc->mba_perm = BIT(QCOM_SCM_VMID_HLOS);
qcom_add_glink_subdev(rproc, &qproc->glink_subdev);
@@ -1759,6 +1826,7 @@ static int q6v5_remove(struct platform_device *pdev)
qcom_remove_glink_subdev(qproc->rproc, &qproc->glink_subdev);
qcom_remove_smd_subdev(qproc->rproc, &qproc->smd_subdev);
qcom_remove_ssr_subdev(qproc->rproc, &qproc->ssr_subdev);
+ qcom_remove_firmware(qproc);

q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project