[PATCH v2 04/11] mmc: sdhci: at91: Use sdhci_set_power_and_voltage()

[Nicolas Saenz Julienne]

The sdhci core provides a helper function with the same functionality as
this controller's set_power() callback. Use it instead.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
---
 drivers/mmc/host/sdhci-of-at91.c | 18 +-----------------
 1 file changed, 1 insertion(+), 17 deletions(-)

diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index ab2bd314a390..564a606f6729 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -101,22 +101,6 @@ static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock)
 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
 }
 
-/*
- * In this specific implementation of the SDHCI controller, the power register
- * needs to have a valid voltage set even when the power supply is managed by
- * an external regulator.
- */
-static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode,
-		     unsigned short vdd)
-{
-	if (!IS_ERR(host->mmc->supply.vmmc)) {
-		struct mmc_host *mmc = host->mmc;
-
-		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
-	}
-	sdhci_set_power_noreg(host, mode, vdd);
-}
-
 static void sdhci_at91_set_uhs_signaling(struct sdhci_host *host,
 					 unsigned int timing)
 {
@@ -145,7 +129,7 @@ static const struct sdhci_ops sdhci_at91_sama5d2_ops = {
 	.set_bus_width		= sdhci_set_bus_width,
 	.reset			= sdhci_at91_reset,
 	.set_uhs_signaling	= sdhci_at91_set_uhs_signaling,
-	.set_power		= sdhci_at91_set_power,
+	.set_power		= sdhci_set_power_and_bus_voltage,
 };
 
 static const struct sdhci_pltfm_data sdhci_sama5d2_pdata = {
-- 
2.25.1