[PATCH v2 11/11] ARM: dts: bcm2711: Add vmmc regulator in emmc2

[Nicolas Saenz Julienne]

The SD card power can be controlled trough a pin routed into the board's
external GPIO expander. Turn that into a regulator and provide it to
emmc2.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index b0ea8233b636..a2da058396fe 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -55,6 +55,16 @@ sd_io_1v8_reg: sd_io_1v8_reg {
 			  3300000 0x0>;
 		status = "okay";
 	};
+
+	sd_vcc_reg: sd_vcc_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &firmware {
@@ -173,6 +183,7 @@ brcmf: wifi@1 {
 /* EMMC2 is used to drive the SD card */
 &emmc2 {
 	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
 	broken-cd;
 	status = "okay";
 };
-- 
2.25.1