[PATCH 0/6] i2c: designeware: Add Baikal-T1 SoC DW I2C specifics support

From: Sergey.Semin
Date: Fri Mar 06 2020 - 08:20:05 EST


From: Serge Semin <fancer.lancer@xxxxxxxxx>

There are three DW I2C controllers embedded into the Baikal-T1 SoC. Two
of them are normal with standard DW I2C IP-core configurations and registers
accessible over normal MMIO space - so they are acceptable by the available
DW I2C driver with no modification. But there is a third, which is a bit
different. Its registers are indirectly accessed be means of "command/data
in/data out" registers tuple. In order to have it also supported by the DW
I2C driver, we must modify the code a bit. This is a main purpose of this
patchset.

First of all traditionally we replaced the legacy plain text-based dt-binding
file with yaml-based one. Then we found and fixed a bug in the DW I2C FIFO size
detection algorithm which tried to do it too early before dw_readl/dw_writel
methods could be used. Finally we introduced a platform-specific flag
ACCESS_INDIRECT, which would enable the indirect access to the DW I2C registers
implemented for one of the Baikal-T1 SoC DW I2C controllers. See the commit
message of the corresponding patch for details.

This patchset is rebased and tested on the mainline Linux kernel 5.6-rc4:
commit 98d54f81e36b ("Linux 5.6-rc4").

Signed-off-by: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Alexey Malahov <Alexey.Malahov@xxxxxxxxxxxxxxxxxxxx>
Cc: Maxim Kaurkin <Maxim.Kaurkin@xxxxxxxxxxxxxxxxxxxx>
Cc: Pavel Parkhomenko <Pavel.Parkhomenko@xxxxxxxxxxxxxxxxxxxx>
Cc: Ramil Zaripov <Ramil.Zaripov@xxxxxxxxxxxxxxxxxxxx>
Cc: Ekaterina Skachko <Ekaterina.Skachko@xxxxxxxxxxxxxxxxxxxx>
Cc: Vadim Vlasov <V.Vlasov@xxxxxxxxxxxxxxxxxxxx>
Cc: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Cc: Paul Burton <paulburton@xxxxxxxxxx>
Cc: Ralf Baechle <ralf@xxxxxxxxxxxxxx>
Cc: Jarkko Nikula <jarkko.nikula@xxxxxxxxxxxxxxx>
Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Cc: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx>
Cc: linux-i2c@xxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx

Serge Semin (6):
scripts/dtc: check: Add additional i2c reg flags support
dt-bindings: i2c: Replace DW I2C legacy bindings with YAML-based one
dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
i2c: designware: Detect the FIFO size in the common code
i2c: designware: Discard i2c_dw_read_comp_param() function
i2c: designware: Add Baikal-T1 SoC I2C controller support

.../bindings/i2c/i2c-designware.txt | 73 --------
.../bindings/i2c/snps,designware-i2c.yaml | 158 ++++++++++++++++++
drivers/i2c/busses/i2c-designware-common.c | 107 ++++++++++--
drivers/i2c/busses/i2c-designware-core.h | 16 +-
drivers/i2c/busses/i2c-designware-master.c | 3 +
drivers/i2c/busses/i2c-designware-platdrv.c | 25 +--
drivers/i2c/busses/i2c-designware-slave.c | 3 +
scripts/dtc/checks.c | 13 +-
8 files changed, 280 insertions(+), 118 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-designware.txt
create mode 100644 Documentation/devicetree/bindings/i2c/snps,designware-i2c.yaml

--
2.25.1