Re: [PATCHv7 04/15] remoteproc/omap: Add support to parse internal memories from DT

From: Mathieu Poirier
Date: Thu Mar 05 2020 - 11:56:46 EST


On Wed, Mar 04, 2020 at 09:08:07PM +0200, Tero Kristo wrote:
> On 04/03/2020 19:32, Mathieu Poirier wrote:
> > On Fri, Feb 21, 2020 at 12:19:25PM +0200, Tero Kristo wrote:
> > > From: Suman Anna <s-anna@xxxxxx>
> > >
> > > The OMAP remoteproc driver has been enhanced to parse and store
> > > the kernel mappings for different internal RAM memories that may
> > > be present within each remote processor IP subsystem. Different
> > > devices have varying memories present on current SoCs. The current
> > > support handles the L2RAM for all IPU devices on OMAP4+ SoCs. The
> > > DSPs on OMAP4/OMAP5 only have Unicaches and do not have any L1 or
> > > L2 RAM memories.
> > >
> > > IPUs are expected to have the L2RAM at a fixed device address of
> > > 0x20000000, based on the current limitations on Attribute MMU
> > > configurations.
> > >
> > > NOTE:
> > > The current logic doesn't handle the parsing of memories for DRA7
> > > remoteproc devices, and will be added alongside the DRA7 support.
> > >
> > > Signed-off-by: Suman Anna <s-anna@xxxxxx>
> > > [t-kristo: converted to parse mem names / device addresses from pdata]
> > > Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
> > > ---
> > > drivers/remoteproc/omap_remoteproc.c | 89 ++++++++++++++++++++++++++++
> > > 1 file changed, 89 insertions(+)
> > >
> > > diff --git a/drivers/remoteproc/omap_remoteproc.c b/drivers/remoteproc/omap_remoteproc.c
> > > index 64b559caadff..4f92b069f5d0 100644
> > > --- a/drivers/remoteproc/omap_remoteproc.c
> > > +++ b/drivers/remoteproc/omap_remoteproc.c
> > > @@ -39,11 +39,27 @@ struct omap_rproc_boot_data {
> > > unsigned int boot_reg;
> > > };
> > > +/**
> > > + * struct omap_rproc_mem - internal memory structure
> > > + * @cpu_addr: MPU virtual address of the memory region
> > > + * @bus_addr: bus address used to access the memory region
> > > + * @dev_addr: device address of the memory region from DSP view
> > > + * @size: size of the memory region
> > > + */
> > > +struct omap_rproc_mem {
> > > + void __iomem *cpu_addr;
> > > + phys_addr_t bus_addr;
> > > + u32 dev_addr;
> > > + size_t size;
> > > +};
> > > +
> > > /**
> > > * struct omap_rproc - omap remote processor state
> > > * @mbox: mailbox channel handle
> > > * @client: mailbox client to request the mailbox channel
> > > * @boot_data: boot data structure for setting processor boot address
> > > + * @mem: internal memory regions data
> > > + * @num_mems: number of internal memory regions
> > > * @rproc: rproc handle
> > > * @reset: reset handle
> > > */
> > > @@ -51,16 +67,30 @@ struct omap_rproc {
> > > struct mbox_chan *mbox;
> > > struct mbox_client client;
> > > struct omap_rproc_boot_data *boot_data;
> > > + struct omap_rproc_mem *mem;
> > > + int num_mems;
> > > struct rproc *rproc;
> > > struct reset_control *reset;
> > > };
> > > +/**
> > > + * struct omap_rproc_mem_data - memory definitions for an omap remote processor
> > > + * @name: name for this memory entry
> > > + * @dev_addr: device address for the memory entry
> > > + */
> > > +struct omap_rproc_mem_data {
> > > + const char *name;
> > > + const u32 dev_addr;
> > > +};
> > > +
> > > /**
> > > * struct omap_rproc_dev_data - device data for the omap remote processor
> > > * @device_name: device name of the remote processor
> > > + * @mems: memory definitions for this remote processor
> > > */
> > > struct omap_rproc_dev_data {
> > > const char *device_name;
> > > + const struct omap_rproc_mem_data *mems;
> > > };
> > > /**
> > > @@ -223,12 +253,18 @@ static const struct rproc_ops omap_rproc_ops = {
> > > .kick = omap_rproc_kick,
> > > };
> > > +static const struct omap_rproc_mem_data ipu_mems[] = {
> > > + { .name = "l2ram", .dev_addr = 0x20000000 },
> > > + { },
> > > +};
> > > +
> > > static const struct omap_rproc_dev_data omap4_dsp_dev_data = {
> > > .device_name = "dsp",
> > > };
> > > static const struct omap_rproc_dev_data omap4_ipu_dev_data = {
> > > .device_name = "ipu",
> > > + .mems = ipu_mems,
> > > };
> > > static const struct omap_rproc_dev_data omap5_dsp_dev_data = {
> > > @@ -237,6 +273,7 @@ static const struct omap_rproc_dev_data omap5_dsp_dev_data = {
> > > static const struct omap_rproc_dev_data omap5_ipu_dev_data = {
> > > .device_name = "ipu",
> > > + .mems = ipu_mems,
> > > };
> > > static const struct of_device_id omap_rproc_of_match[] = {
> > > @@ -311,6 +348,54 @@ static int omap_rproc_get_boot_data(struct platform_device *pdev,
> > > return 0;
> > > }
> > > +static int omap_rproc_of_get_internal_memories(struct platform_device *pdev,
> > > + struct rproc *rproc)
> > > +{
> > > + struct omap_rproc *oproc = rproc->priv;
> > > + struct device *dev = &pdev->dev;
> > > + const struct omap_rproc_dev_data *data;
> > > + struct resource *res;
> > > + int num_mems;
> > > + int i;
> > > +
> > > + data = of_device_get_match_data(&pdev->dev);
> > > + if (!data)
> > > + return -ENODEV;
> > > +
> > > + if (!data->mems)
> > > + return 0;
> > > +
> > > + for (num_mems = 0; data->mems[num_mems].name; num_mems++)
> > > + ;
> >
> > Please use of_property_count_elems_of_size() as it was done in omap_hwmod.c [1]
>
> There is reason why it was not done like that here. We want to make sure all
> the memories required for the remoteproc are in place, missing any one of
> them is a fatal error as you see in the code few lines below (my comment.)
>
> >
> > [1]. https://elixir.bootlin.com/linux/v5.6-rc4/source/arch/arm/mach-omap2/omap_hwmod.c#L717
> >
> > With the above:
> >
> > Acked-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> >
> >
> > > +
> > > + oproc->mem = devm_kcalloc(dev, num_mems, sizeof(*oproc->mem),
> > > + GFP_KERNEL);
> > > + if (!oproc->mem)
> > > + return -ENOMEM;
> > > +
> > > + for (i = 0; i < num_mems; i++) {
> > > + res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > > + data->mems[i].name);
> > > + oproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
> > > + if (IS_ERR(oproc->mem[i].cpu_addr)) {
> > > + dev_err(dev, "failed to parse and map %s memory\n",
> > > + data->mems[i].name);
> > > + return PTR_ERR(oproc->mem[i].cpu_addr);
> > > + }
>
> We check here that all the memories required are defined for the remoteproc.
> If we use of_property_count_elems_of_size, we only get the number of
> memories defined in DT.

To make sure all memories are accounted for use data->mem[] in the loop:


num_mems = of_property_count_elems_of_size();
oproc->mem = devm_kcalloc();

for (i = 0; data->mem[i]; i++) {
res = platform_get_resource_byname(pdev, IORESOURCES_MEM,
data->mems[i].name);
oproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res);
...
...
}

>
> -Tero
>
> > > + oproc->mem[i].bus_addr = res->start;
> > > + oproc->mem[i].dev_addr = data->mems[i].dev_addr;
> > > + oproc->mem[i].size = resource_size(res);
> > > +
> > > + dev_dbg(dev, "memory %8s: bus addr %pa size 0x%x va %pK da 0x%x\n",
> > > + data->mems[i].name, &oproc->mem[i].bus_addr,
> > > + oproc->mem[i].size, oproc->mem[i].cpu_addr,
> > > + oproc->mem[i].dev_addr);
> > > + }
> > > + oproc->num_mems = num_mems;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > static int omap_rproc_probe(struct platform_device *pdev)
> > > {
> > > struct device_node *np = pdev->dev.of_node;
> > > @@ -350,6 +435,10 @@ static int omap_rproc_probe(struct platform_device *pdev)
> > > /* All existing OMAP IPU and DSP processors have an MMU */
> > > rproc->has_iommu = true;
> > > + ret = omap_rproc_of_get_internal_memories(pdev, rproc);
> > > + if (ret)
> > > + goto free_rproc;
> > > +
> > > ret = omap_rproc_get_boot_data(pdev, rproc);
> > > if (ret)
> > > goto free_rproc;
> > > --
> > > 2.17.1
> > >
> > > --
>
> --
> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki