[PATCH] bus: ti-sysc: Fix wrong offset for display subsystem reset quirk

[Tony Lindgren]

Commit 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset
quirk") added support for DSS reset, but is using dispc offset also for
DSS also registers as reported by Tomi Valkeinen <tomi.valkeinen@xxxxxx>.
Also, we're not using dispc_offset for dispc IRQSTATUS register so let's
fix that too.

Fixes: 7324a7a0d5e2 ("bus: ti-sysc: Implement display subsystem reset quirk")
Reported-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 drivers/bus/ti-sysc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1566,7 +1566,7 @@ static void sysc_pre_reset_quirk_dss(struct sysc *ddata)
 		return;
 
 	/* Clear IRQSTATUS */
-	sysc_write(ddata, 0x1000 + 0x18, irq_mask);
+	sysc_write(ddata, dispc_offset + 0x18, irq_mask);
 
 	/* Disable outputs */
 	val = sysc_quirk_dispc(ddata, dispc_offset, true);
@@ -1580,14 +1580,14 @@ static void sysc_pre_reset_quirk_dss(struct sysc *ddata)
 
 	if (sysc_soc->soc == SOC_3430) {
 		/* Clear DSS_SDI_CONTROL */
-		sysc_write(ddata, dispc_offset + 0x44, 0);
+		sysc_write(ddata, 0x44, 0);
 
 		/* Clear DSS_PLL_CONTROL */
-		sysc_write(ddata, dispc_offset + 0x48, 0);
+		sysc_write(ddata, 0x48, 0);
 	}
 
 	/* Clear DSS_CONTROL to switch DSS clock sources to PRCM if not */
-	sysc_write(ddata, dispc_offset + 0x40, 0);
+	sysc_write(ddata, 0x40, 0);
 }
 
 /* 1-wire needs module's internal clocks enabled for reset */
-- 
2.25.1