[PATCH 03/23] mtd: spi-nor: Move SFDP logic out of the core
From: Tudor.Ambarus
Date: Mon Mar 02 2020 - 13:07:58 EST
From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
It makes the core file a bit smaller and provides better separation
between the SFDP parsing and core logic.
Keep the core.h and sfdp.h definitions private in drivers/mtd/spi-nor/.
Both expose just the definitions that are required by the core and
manufacturer drivers. None of the SPI NOR controller drivers should
include them.
Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
---
drivers/mtd/spi-nor/Makefile | 2 +-
drivers/mtd/spi-nor/core.c | 1315 +---------------------------------
drivers/mtd/spi-nor/core.h | 36 +
drivers/mtd/spi-nor/sfdp.c | 1196 +++++++++++++++++++++++++++++++
drivers/mtd/spi-nor/sfdp.h | 98 +++
5 files changed, 1350 insertions(+), 1297 deletions(-)
create mode 100644 drivers/mtd/spi-nor/core.h
create mode 100644 drivers/mtd/spi-nor/sfdp.c
create mode 100644 drivers/mtd/spi-nor/sfdp.h
diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
index d6fc70ab4a32..6bcdb6f1615a 100644
--- a/drivers/mtd/spi-nor/Makefile
+++ b/drivers/mtd/spi-nor/Makefile
@@ -1,4 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
-spi-nor-objs := core.o
+spi-nor-objs := core.o sfdp.o
obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index b15e262765e1..1edcb53c4df3 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -15,7 +15,6 @@
#include <linux/math64.h>
#include <linux/sizes.h>
#include <linux/slab.h>
-#include <linux/sort.h>
#include <linux/mtd/mtd.h>
#include <linux/of_platform.h>
@@ -23,6 +22,8 @@
#include <linux/spi/flash.h>
#include <linux/mtd/spi-nor.h>
+#include "core.h"
+
/* Define max times to check status register before we give up. */
/*
@@ -40,118 +41,6 @@
#define SPI_NOR_MAX_ID_LEN 6
#define SPI_NOR_MAX_ADDR_WIDTH 4
-struct sfdp_parameter_header {
- u8 id_lsb;
- u8 minor;
- u8 major;
- u8 length; /* in double words */
- u8 parameter_table_pointer[3]; /* byte address */
- u8 id_msb;
-};
-
-#define SFDP_PARAM_HEADER_ID(p) (((p)->id_msb << 8) | (p)->id_lsb)
-#define SFDP_PARAM_HEADER_PTP(p) \
- (((p)->parameter_table_pointer[2] << 16) | \
- ((p)->parameter_table_pointer[1] << 8) | \
- ((p)->parameter_table_pointer[0] << 0))
-
-#define SFDP_BFPT_ID 0xff00 /* Basic Flash Parameter Table */
-#define SFDP_SECTOR_MAP_ID 0xff81 /* Sector Map Table */
-#define SFDP_4BAIT_ID 0xff84 /* 4-byte Address Instruction Table */
-
-#define SFDP_SIGNATURE 0x50444653U
-#define SFDP_JESD216_MAJOR 1
-#define SFDP_JESD216_MINOR 0
-#define SFDP_JESD216A_MINOR 5
-#define SFDP_JESD216B_MINOR 6
-
-struct sfdp_header {
- u32 signature; /* Ox50444653U <=> "SFDP" */
- u8 minor;
- u8 major;
- u8 nph; /* 0-base number of parameter headers */
- u8 unused;
-
- /* Basic Flash Parameter Table. */
- struct sfdp_parameter_header bfpt_header;
-};
-
-/* Basic Flash Parameter Table */
-
-/*
- * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
- * They are indexed from 1 but C arrays are indexed from 0.
- */
-#define BFPT_DWORD(i) ((i) - 1)
-#define BFPT_DWORD_MAX 16
-
-/* The first version of JESD216 defined only 9 DWORDs. */
-#define BFPT_DWORD_MAX_JESD216 9
-
-/* 1st DWORD. */
-#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16)
-#define BFPT_DWORD1_ADDRESS_BYTES_MASK GENMASK(18, 17)
-#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY (0x0UL << 17)
-#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 (0x1UL << 17)
-#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY (0x2UL << 17)
-#define BFPT_DWORD1_DTR BIT(19)
-#define BFPT_DWORD1_FAST_READ_1_2_2 BIT(20)
-#define BFPT_DWORD1_FAST_READ_1_4_4 BIT(21)
-#define BFPT_DWORD1_FAST_READ_1_1_4 BIT(22)
-
-/* 5th DWORD. */
-#define BFPT_DWORD5_FAST_READ_2_2_2 BIT(0)
-#define BFPT_DWORD5_FAST_READ_4_4_4 BIT(4)
-
-/* 11th DWORD. */
-#define BFPT_DWORD11_PAGE_SIZE_SHIFT 4
-#define BFPT_DWORD11_PAGE_SIZE_MASK GENMASK(7, 4)
-
-/* 15th DWORD. */
-
-/*
- * (from JESD216 rev B)
- * Quad Enable Requirements (QER):
- * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4
- * reads based on instruction. DQ3/HOLD# functions are hold during
- * instruction phase.
- * - 001b: QE is bit 1 of status register 2. It is set via Write Status with
- * two data bytes where bit 1 of the second byte is one.
- * [...]
- * Writing only one byte to the status register has the side-effect of
- * clearing status register 2, including the QE bit. The 100b code is
- * used if writing one byte to the status register does not modify
- * status register 2.
- * - 010b: QE is bit 6 of status register 1. It is set via Write Status with
- * one data byte where bit 6 is one.
- * [...]
- * - 011b: QE is bit 7 of status register 2. It is set via Write status
- * register 2 instruction 3Eh with one data byte where bit 7 is one.
- * [...]
- * The status register 2 is read using instruction 3Fh.
- * - 100b: QE is bit 1 of status register 2. It is set via Write Status with
- * two data bytes where bit 1 of the second byte is one.
- * [...]
- * In contrast to the 001b code, writing one byte to the status
- * register does not modify status register 2.
- * - 101b: QE is bit 1 of status register 2. Status register 1 is read using
- * Read Status instruction 05h. Status register2 is read using
- * instruction 35h. QE is set via Write Status instruction 01h with
- * two data bytes where bit 1 of the second byte is one.
- * [...]
- */
-#define BFPT_DWORD15_QER_MASK GENMASK(22, 20)
-#define BFPT_DWORD15_QER_NONE (0x0UL << 20) /* Micron */
-#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY (0x1UL << 20)
-#define BFPT_DWORD15_QER_SR1_BIT6 (0x2UL << 20) /* Macronix */
-#define BFPT_DWORD15_QER_SR2_BIT7 (0x3UL << 20)
-#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20)
-#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */
-
-struct sfdp_bfpt {
- u32 dwords[BFPT_DWORD_MAX];
-};
-
/**
* struct spi_nor_fixups - SPI NOR fixup hooks
* @default_init: called after default flash parameters init. Used to tweak
@@ -345,8 +234,7 @@ static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from,
*
* Return: number of bytes read successfully, -errno otherwise
*/
-static ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
- u8 *buf)
+ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len, u8 *buf)
{
if (nor->spimem)
return spi_nor_spimem_read_data(nor, from, len, buf);
@@ -1271,7 +1159,7 @@ static u8 spi_nor_convert_opcode(u8 opcode, const u8 table[][2], size_t size)
return opcode;
}
-static u8 spi_nor_convert_3to4_read(u8 opcode)
+u8 spi_nor_convert_3to4_read(u8 opcode)
{
static const u8 spi_nor_3to4_read[][2] = {
{ SPINOR_OP_READ, SPINOR_OP_READ_4B },
@@ -1496,7 +1384,7 @@ spi_nor_find_best_erase_type(const struct spi_nor_erase_map *map,
*
* Return: the next spi nor region or NULL if last region.
*/
-static struct spi_nor_erase_region *
+struct spi_nor_erase_region *
spi_nor_region_next(struct spi_nor_erase_region *region)
{
if (spi_nor_region_is_last(region))
@@ -2125,7 +2013,7 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
*
* Return: 0 on success, -errno otherwise.
*/
-static int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
+int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
{
int ret;
@@ -2150,7 +2038,7 @@ static int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor)
*
* Return: 0 on success, -errno otherwise.
*/
-static int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
+int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
{
int ret;
@@ -2181,7 +2069,7 @@ static int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor)
*
* Return: 0 on success, -errno otherwise.
*/
-static int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
+int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor)
{
u8 *sr2 = nor->bouncebuf;
int ret;
@@ -3029,10 +2917,8 @@ spi_nor_set_read_settings(struct spi_nor_read_command *read,
read->proto = proto;
}
-static void
-spi_nor_set_pp_settings(struct spi_nor_pp_command *pp,
- u8 opcode,
- enum spi_nor_protocol proto)
+void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode,
+ enum spi_nor_protocol proto)
{
pp->opcode = opcode;
pp->proto = proto;
@@ -3049,7 +2935,7 @@ static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size)
return -EINVAL;
}
-static int spi_nor_hwcaps_read2cmd(u32 hwcaps)
+int spi_nor_hwcaps_read2cmd(u32 hwcaps)
{
static const int hwcaps_read2cmd[][2] = {
{ SNOR_HWCAPS_READ, SNOR_CMD_READ },
@@ -3089,76 +2975,6 @@ static int spi_nor_hwcaps_pp2cmd(u32 hwcaps)
ARRAY_SIZE(hwcaps_pp2cmd));
}
-/*
- * Serial Flash Discoverable Parameters (SFDP) parsing.
- */
-
-/**
- * spi_nor_read_raw() - raw read of serial flash memory. read_opcode,
- * addr_width and read_dummy members of the struct spi_nor
- * should be previously
- * set.
- * @nor: pointer to a 'struct spi_nor'
- * @addr: offset in the serial flash memory
- * @len: number of bytes to read
- * @buf: buffer where the data is copied into (dma-safe memory)
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
-{
- ssize_t ret;
-
- while (len) {
- ret = spi_nor_read_data(nor, addr, len, buf);
- if (ret < 0)
- return ret;
- if (!ret || ret > len)
- return -EIO;
-
- buf += ret;
- addr += ret;
- len -= ret;
- }
- return 0;
-}
-
-/**
- * spi_nor_read_sfdp() - read Serial Flash Discoverable Parameters.
- * @nor: pointer to a 'struct spi_nor'
- * @addr: offset in the SFDP area to start reading data from
- * @len: number of bytes to read
- * @buf: buffer where the SFDP data are copied into (dma-safe memory)
- *
- * Whatever the actual numbers of bytes for address and dummy cycles are
- * for (Fast) Read commands, the Read SFDP (5Ah) instruction is always
- * followed by a 3-byte address and 8 dummy clock cycles.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr,
- size_t len, void *buf)
-{
- u8 addr_width, read_opcode, read_dummy;
- int ret;
-
- read_opcode = nor->read_opcode;
- addr_width = nor->addr_width;
- read_dummy = nor->read_dummy;
-
- nor->read_opcode = SPINOR_OP_RDSFDP;
- nor->addr_width = 3;
- nor->read_dummy = 8;
-
- ret = spi_nor_read_raw(nor, addr, len, buf);
-
- nor->read_opcode = read_opcode;
- nor->addr_width = addr_width;
- nor->read_dummy = read_dummy;
-
- return ret;
-}
-
/**
* spi_nor_spimem_check_op - check if the operation is supported
* by controller
@@ -3279,153 +3095,14 @@ spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps)
}
}
-/**
- * spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters.
- * @nor: pointer to a 'struct spi_nor'
- * @addr: offset in the SFDP area to start reading data from
- * @len: number of bytes to read
- * @buf: buffer where the SFDP data are copied into
- *
- * Wrap spi_nor_read_sfdp() using a kmalloc'ed bounce buffer as @buf is now not
- * guaranteed to be dma-safe.
- *
- * Return: -ENOMEM if kmalloc() fails, the return code of spi_nor_read_sfdp()
- * otherwise.
- */
-static int spi_nor_read_sfdp_dma_unsafe(struct spi_nor *nor, u32 addr,
- size_t len, void *buf)
-{
- void *dma_safe_buf;
- int ret;
-
- dma_safe_buf = kmalloc(len, GFP_KERNEL);
- if (!dma_safe_buf)
- return -ENOMEM;
-
- ret = spi_nor_read_sfdp(nor, addr, len, dma_safe_buf);
- memcpy(buf, dma_safe_buf, len);
- kfree(dma_safe_buf);
-
- return ret;
-}
-
-/* Fast Read settings. */
-
-static void
-spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read,
- u16 half,
- enum spi_nor_protocol proto)
-{
- read->num_mode_clocks = (half >> 5) & 0x07;
- read->num_wait_states = (half >> 0) & 0x1f;
- read->opcode = (half >> 8) & 0xff;
- read->proto = proto;
-}
-
-struct sfdp_bfpt_read {
- /* The Fast Read x-y-z hardware capability in params->hwcaps.mask. */
- u32 hwcaps;
-
- /*
- * The <supported_bit> bit in <supported_dword> BFPT DWORD tells us
- * whether the Fast Read x-y-z command is supported.
- */
- u32 supported_dword;
- u32 supported_bit;
-
- /*
- * The half-word at offset <setting_shift> in <setting_dword> BFPT DWORD
- * encodes the op code, the number of mode clocks and the number of wait
- * states to be used by Fast Read x-y-z command.
- */
- u32 settings_dword;
- u32 settings_shift;
-
- /* The SPI protocol for this Fast Read x-y-z command. */
- enum spi_nor_protocol proto;
-};
-
-static const struct sfdp_bfpt_read sfdp_bfpt_reads[] = {
- /* Fast Read 1-1-2 */
- {
- SNOR_HWCAPS_READ_1_1_2,
- BFPT_DWORD(1), BIT(16), /* Supported bit */
- BFPT_DWORD(4), 0, /* Settings */
- SNOR_PROTO_1_1_2,
- },
-
- /* Fast Read 1-2-2 */
- {
- SNOR_HWCAPS_READ_1_2_2,
- BFPT_DWORD(1), BIT(20), /* Supported bit */
- BFPT_DWORD(4), 16, /* Settings */
- SNOR_PROTO_1_2_2,
- },
-
- /* Fast Read 2-2-2 */
- {
- SNOR_HWCAPS_READ_2_2_2,
- BFPT_DWORD(5), BIT(0), /* Supported bit */
- BFPT_DWORD(6), 16, /* Settings */
- SNOR_PROTO_2_2_2,
- },
-
- /* Fast Read 1-1-4 */
- {
- SNOR_HWCAPS_READ_1_1_4,
- BFPT_DWORD(1), BIT(22), /* Supported bit */
- BFPT_DWORD(3), 16, /* Settings */
- SNOR_PROTO_1_1_4,
- },
-
- /* Fast Read 1-4-4 */
- {
- SNOR_HWCAPS_READ_1_4_4,
- BFPT_DWORD(1), BIT(21), /* Supported bit */
- BFPT_DWORD(3), 0, /* Settings */
- SNOR_PROTO_1_4_4,
- },
-
- /* Fast Read 4-4-4 */
- {
- SNOR_HWCAPS_READ_4_4_4,
- BFPT_DWORD(5), BIT(4), /* Supported bit */
- BFPT_DWORD(7), 16, /* Settings */
- SNOR_PROTO_4_4_4,
- },
-};
-
-struct sfdp_bfpt_erase {
- /*
- * The half-word at offset <shift> in DWORD <dwoard> encodes the
- * op code and erase sector size to be used by Sector Erase commands.
- */
- u32 dword;
- u32 shift;
-};
-
-static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = {
- /* Erase Type 1 in DWORD8 bits[15:0] */
- {BFPT_DWORD(8), 0},
-
- /* Erase Type 2 in DWORD8 bits[31:16] */
- {BFPT_DWORD(8), 16},
-
- /* Erase Type 3 in DWORD9 bits[15:0] */
- {BFPT_DWORD(9), 0},
-
- /* Erase Type 4 in DWORD9 bits[31:16] */
- {BFPT_DWORD(9), 16},
-};
-
/**
* spi_nor_set_erase_type() - set a SPI NOR erase type
* @erase: pointer to a structure that describes a SPI NOR erase type
* @size: the size of the sector/block erased by the erase type
* @opcode: the SPI command op code to erase the sector/block
*/
-static void spi_nor_set_erase_type(struct spi_nor_erase_type *erase,
- u32 size, u8 opcode)
+void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
+ u8 opcode)
{
erase->size = size;
erase->opcode = opcode;
@@ -3434,104 +3111,6 @@ static void spi_nor_set_erase_type(struct spi_nor_erase_type *erase,
erase->size_mask = (1 << erase->size_shift) - 1;
}
-/**
- * spi_nor_set_erase_settings_from_bfpt() - set erase type settings from BFPT
- * @erase: pointer to a structure that describes a SPI NOR erase type
- * @size: the size of the sector/block erased by the erase type
- * @opcode: the SPI command op code to erase the sector/block
- * @i: erase type index as sorted in the Basic Flash Parameter Table
- *
- * The supported Erase Types will be sorted at init in ascending order, with
- * the smallest Erase Type size being the first member in the erase_type array
- * of the spi_nor_erase_map structure. Save the Erase Type index as sorted in
- * the Basic Flash Parameter Table since it will be used later on to
- * synchronize with the supported Erase Types defined in SFDP optional tables.
- */
-static void
-spi_nor_set_erase_settings_from_bfpt(struct spi_nor_erase_type *erase,
- u32 size, u8 opcode, u8 i)
-{
- erase->idx = i;
- spi_nor_set_erase_type(erase, size, opcode);
-}
-
-/**
- * spi_nor_map_cmp_erase_type() - compare the map's erase types by size
- * @l: member in the left half of the map's erase_type array
- * @r: member in the right half of the map's erase_type array
- *
- * Comparison function used in the sort() call to sort in ascending order the
- * map's erase types, the smallest erase type size being the first member in the
- * sorted erase_type array.
- *
- * Return: the result of @l->size - @r->size
- */
-static int spi_nor_map_cmp_erase_type(const void *l, const void *r)
-{
- const struct spi_nor_erase_type *left = l, *right = r;
-
- return left->size - right->size;
-}
-
-/**
- * spi_nor_sort_erase_mask() - sort erase mask
- * @map: the erase map of the SPI NOR
- * @erase_mask: the erase type mask to be sorted
- *
- * Replicate the sort done for the map's erase types in BFPT: sort the erase
- * mask in ascending order with the smallest erase type size starting from
- * BIT(0) in the sorted erase mask.
- *
- * Return: sorted erase mask.
- */
-static u8 spi_nor_sort_erase_mask(struct spi_nor_erase_map *map, u8 erase_mask)
-{
- struct spi_nor_erase_type *erase_type = map->erase_type;
- int i;
- u8 sorted_erase_mask = 0;
-
- if (!erase_mask)
- return 0;
-
- /* Replicate the sort done for the map's erase types. */
- for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
- if (erase_type[i].size && erase_mask & BIT(erase_type[i].idx))
- sorted_erase_mask |= BIT(i);
-
- return sorted_erase_mask;
-}
-
-/**
- * spi_nor_regions_sort_erase_types() - sort erase types in each region
- * @map: the erase map of the SPI NOR
- *
- * Function assumes that the erase types defined in the erase map are already
- * sorted in ascending order, with the smallest erase type size being the first
- * member in the erase_type array. It replicates the sort done for the map's
- * erase types. Each region's erase bitmask will indicate which erase types are
- * supported from the sorted erase types defined in the erase map.
- * Sort the all region's erase type at init in order to speed up the process of
- * finding the best erase command at runtime.
- */
-static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map)
-{
- struct spi_nor_erase_region *region = map->regions;
- u8 region_erase_mask, sorted_erase_mask;
-
- while (region) {
- region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
-
- sorted_erase_mask = spi_nor_sort_erase_mask(map,
- region_erase_mask);
-
- /* Overwrite erase mask. */
- region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) |
- sorted_erase_mask;
-
- region = spi_nor_region_next(region);
- }
-}
-
/**
* spi_nor_init_uniform_erase_map() - Initialize uniform erase map
* @map: the erase map of the SPI NOR
@@ -3539,8 +3118,8 @@ static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map)
* flash memory
* @flash_size: the spi nor flash memory size
*/
-static void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
- u8 erase_mask, u64 flash_size)
+void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
+ u8 erase_mask, u64 flash_size)
{
/* Offset 0 with erase_mask and SNOR_LAST_REGION bit set */
map->uniform_region.offset = (erase_mask & SNOR_ERASE_TYPE_MASK) |
@@ -3550,11 +3129,10 @@ static void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
map->uniform_erase_type = erase_mask;
}
-static int
-spi_nor_post_bfpt_fixups(struct spi_nor *nor,
- const struct sfdp_parameter_header *bfpt_header,
- const struct sfdp_bfpt *bfpt,
- struct spi_nor_flash_parameter *params)
+int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ const struct sfdp_bfpt *bfpt,
+ struct spi_nor_flash_parameter *params)
{
if (nor->info->fixups && nor->info->fixups->post_bfpt)
return nor->info->fixups->post_bfpt(nor, bfpt_header, bfpt,
@@ -3563,861 +3141,6 @@ spi_nor_post_bfpt_fixups(struct spi_nor *nor,
return 0;
}
-/**
- * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table.
- * @nor: pointer to a 'struct spi_nor'
- * @bfpt_header: pointer to the 'struct sfdp_parameter_header' describing
- * the Basic Flash Parameter Table length and version
- * @params: pointer to the 'struct spi_nor_flash_parameter' to be
- * filled
- *
- * The Basic Flash Parameter Table is the main and only mandatory table as
- * defined by the SFDP (JESD216) specification.
- * It provides us with the total size (memory density) of the data array and
- * the number of address bytes for Fast Read, Page Program and Sector Erase
- * commands.
- * For Fast READ commands, it also gives the number of mode clock cycles and
- * wait states (regrouped in the number of dummy clock cycles) for each
- * supported instruction op code.
- * For Page Program, the page size is now available since JESD216 rev A, however
- * the supported instruction op codes are still not provided.
- * For Sector Erase commands, this table stores the supported instruction op
- * codes and the associated sector sizes.
- * Finally, the Quad Enable Requirements (QER) are also available since JESD216
- * rev A. The QER bits encode the manufacturer dependent procedure to be
- * executed to set the Quad Enable (QE) bit in some internal register of the
- * Quad SPI memory. Indeed the QE bit, when it exists, must be set before
- * sending any Quad SPI command to the memory. Actually, setting the QE bit
- * tells the memory to reassign its WP# and HOLD#/RESET# pins to functions IO2
- * and IO3 hence enabling 4 (Quad) I/O lines.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_parse_bfpt(struct spi_nor *nor,
- const struct sfdp_parameter_header *bfpt_header,
- struct spi_nor_flash_parameter *params)
-{
- struct spi_nor_erase_map *map = ¶ms->erase_map;
- struct spi_nor_erase_type *erase_type = map->erase_type;
- struct sfdp_bfpt bfpt;
- size_t len;
- int i, cmd, err;
- u32 addr;
- u16 half;
- u8 erase_mask;
-
- /* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */
- if (bfpt_header->length < BFPT_DWORD_MAX_JESD216)
- return -EINVAL;
-
- /* Read the Basic Flash Parameter Table. */
- len = min_t(size_t, sizeof(bfpt),
- bfpt_header->length * sizeof(u32));
- addr = SFDP_PARAM_HEADER_PTP(bfpt_header);
- memset(&bfpt, 0, sizeof(bfpt));
- err = spi_nor_read_sfdp_dma_unsafe(nor, addr, len, &bfpt);
- if (err < 0)
- return err;
-
- /* Fix endianness of the BFPT DWORDs. */
- le32_to_cpu_array(bfpt.dwords, BFPT_DWORD_MAX);
-
- /* Number of address bytes. */
- switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
- case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
- nor->addr_width = 3;
- break;
-
- case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
- nor->addr_width = 4;
- break;
-
- default:
- break;
- }
-
- /* Flash Memory Density (in bits). */
- params->size = bfpt.dwords[BFPT_DWORD(2)];
- if (params->size & BIT(31)) {
- params->size &= ~BIT(31);
-
- /*
- * Prevent overflows on params->size. Anyway, a NOR of 2^64
- * bits is unlikely to exist so this error probably means
- * the BFPT we are reading is corrupted/wrong.
- */
- if (params->size > 63)
- return -EINVAL;
-
- params->size = 1ULL << params->size;
- } else {
- params->size++;
- }
- params->size >>= 3; /* Convert to bytes. */
-
- /* Fast Read settings. */
- for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_reads); i++) {
- const struct sfdp_bfpt_read *rd = &sfdp_bfpt_reads[i];
- struct spi_nor_read_command *read;
-
- if (!(bfpt.dwords[rd->supported_dword] & rd->supported_bit)) {
- params->hwcaps.mask &= ~rd->hwcaps;
- continue;
- }
-
- params->hwcaps.mask |= rd->hwcaps;
- cmd = spi_nor_hwcaps_read2cmd(rd->hwcaps);
- read = ¶ms->reads[cmd];
- half = bfpt.dwords[rd->settings_dword] >> rd->settings_shift;
- spi_nor_set_read_settings_from_bfpt(read, half, rd->proto);
- }
-
- /*
- * Sector Erase settings. Reinitialize the uniform erase map using the
- * Erase Types defined in the bfpt table.
- */
- erase_mask = 0;
- memset(¶ms->erase_map, 0, sizeof(params->erase_map));
- for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
- const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
- u32 erasesize;
- u8 opcode;
-
- half = bfpt.dwords[er->dword] >> er->shift;
- erasesize = half & 0xff;
-
- /* erasesize == 0 means this Erase Type is not supported. */
- if (!erasesize)
- continue;
-
- erasesize = 1U << erasesize;
- opcode = (half >> 8) & 0xff;
- erase_mask |= BIT(i);
- spi_nor_set_erase_settings_from_bfpt(&erase_type[i], erasesize,
- opcode, i);
- }
- spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
- /*
- * Sort all the map's Erase Types in ascending order with the smallest
- * erase size being the first member in the erase_type array.
- */
- sort(erase_type, SNOR_ERASE_TYPE_MAX, sizeof(erase_type[0]),
- spi_nor_map_cmp_erase_type, NULL);
- /*
- * Sort the erase types in the uniform region in order to update the
- * uniform_erase_type bitmask. The bitmask will be used later on when
- * selecting the uniform erase.
- */
- spi_nor_regions_sort_erase_types(map);
- map->uniform_erase_type = map->uniform_region.offset &
- SNOR_ERASE_TYPE_MASK;
-
- /* Stop here if not JESD216 rev A or later. */
- if (bfpt_header->length < BFPT_DWORD_MAX)
- return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
- params);
-
- /* Page size: this field specifies 'N' so the page size = 2^N bytes. */
- params->page_size = bfpt.dwords[BFPT_DWORD(11)];
- params->page_size &= BFPT_DWORD11_PAGE_SIZE_MASK;
- params->page_size >>= BFPT_DWORD11_PAGE_SIZE_SHIFT;
- params->page_size = 1U << params->page_size;
-
- /* Quad Enable Requirements. */
- switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) {
- case BFPT_DWORD15_QER_NONE:
- params->quad_enable = NULL;
- break;
-
- case BFPT_DWORD15_QER_SR2_BIT1_BUGGY:
- /*
- * Writing only one byte to the Status Register has the
- * side-effect of clearing Status Register 2.
- */
- case BFPT_DWORD15_QER_SR2_BIT1_NO_RD:
- /*
- * Read Configuration Register (35h) instruction is not
- * supported.
- */
- nor->flags |= SNOR_F_HAS_16BIT_SR | SNOR_F_NO_READ_CR;
- params->quad_enable = spi_nor_sr2_bit1_quad_enable;
- break;
-
- case BFPT_DWORD15_QER_SR1_BIT6:
- nor->flags &= ~SNOR_F_HAS_16BIT_SR;
- params->quad_enable = spi_nor_sr1_bit6_quad_enable;
- break;
-
- case BFPT_DWORD15_QER_SR2_BIT7:
- nor->flags &= ~SNOR_F_HAS_16BIT_SR;
- params->quad_enable = spi_nor_sr2_bit7_quad_enable;
- break;
-
- case BFPT_DWORD15_QER_SR2_BIT1:
- /*
- * JESD216 rev B or later does not specify if writing only one
- * byte to the Status Register clears or not the Status
- * Register 2, so let's be cautious and keep the default
- * assumption of a 16-bit Write Status (01h) command.
- */
- nor->flags |= SNOR_F_HAS_16BIT_SR;
-
- params->quad_enable = spi_nor_sr2_bit1_quad_enable;
- break;
-
- default:
- return -EINVAL;
- }
-
- return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
-}
-
-#define SMPT_CMD_ADDRESS_LEN_MASK GENMASK(23, 22)
-#define SMPT_CMD_ADDRESS_LEN_0 (0x0UL << 22)
-#define SMPT_CMD_ADDRESS_LEN_3 (0x1UL << 22)
-#define SMPT_CMD_ADDRESS_LEN_4 (0x2UL << 22)
-#define SMPT_CMD_ADDRESS_LEN_USE_CURRENT (0x3UL << 22)
-
-#define SMPT_CMD_READ_DUMMY_MASK GENMASK(19, 16)
-#define SMPT_CMD_READ_DUMMY_SHIFT 16
-#define SMPT_CMD_READ_DUMMY(_cmd) \
- (((_cmd) & SMPT_CMD_READ_DUMMY_MASK) >> SMPT_CMD_READ_DUMMY_SHIFT)
-#define SMPT_CMD_READ_DUMMY_IS_VARIABLE 0xfUL
-
-#define SMPT_CMD_READ_DATA_MASK GENMASK(31, 24)
-#define SMPT_CMD_READ_DATA_SHIFT 24
-#define SMPT_CMD_READ_DATA(_cmd) \
- (((_cmd) & SMPT_CMD_READ_DATA_MASK) >> SMPT_CMD_READ_DATA_SHIFT)
-
-#define SMPT_CMD_OPCODE_MASK GENMASK(15, 8)
-#define SMPT_CMD_OPCODE_SHIFT 8
-#define SMPT_CMD_OPCODE(_cmd) \
- (((_cmd) & SMPT_CMD_OPCODE_MASK) >> SMPT_CMD_OPCODE_SHIFT)
-
-#define SMPT_MAP_REGION_COUNT_MASK GENMASK(23, 16)
-#define SMPT_MAP_REGION_COUNT_SHIFT 16
-#define SMPT_MAP_REGION_COUNT(_header) \
- ((((_header) & SMPT_MAP_REGION_COUNT_MASK) >> \
- SMPT_MAP_REGION_COUNT_SHIFT) + 1)
-
-#define SMPT_MAP_ID_MASK GENMASK(15, 8)
-#define SMPT_MAP_ID_SHIFT 8
-#define SMPT_MAP_ID(_header) \
- (((_header) & SMPT_MAP_ID_MASK) >> SMPT_MAP_ID_SHIFT)
-
-#define SMPT_MAP_REGION_SIZE_MASK GENMASK(31, 8)
-#define SMPT_MAP_REGION_SIZE_SHIFT 8
-#define SMPT_MAP_REGION_SIZE(_region) \
- (((((_region) & SMPT_MAP_REGION_SIZE_MASK) >> \
- SMPT_MAP_REGION_SIZE_SHIFT) + 1) * 256)
-
-#define SMPT_MAP_REGION_ERASE_TYPE_MASK GENMASK(3, 0)
-#define SMPT_MAP_REGION_ERASE_TYPE(_region) \
- ((_region) & SMPT_MAP_REGION_ERASE_TYPE_MASK)
-
-#define SMPT_DESC_TYPE_MAP BIT(1)
-#define SMPT_DESC_END BIT(0)
-
-/**
- * spi_nor_smpt_addr_width() - return the address width used in the
- * configuration detection command.
- * @nor: pointer to a 'struct spi_nor'
- * @settings: configuration detection command descriptor, dword1
- */
-static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings)
-{
- switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) {
- case SMPT_CMD_ADDRESS_LEN_0:
- return 0;
- case SMPT_CMD_ADDRESS_LEN_3:
- return 3;
- case SMPT_CMD_ADDRESS_LEN_4:
- return 4;
- case SMPT_CMD_ADDRESS_LEN_USE_CURRENT:
- /* fall through */
- default:
- return nor->addr_width;
- }
-}
-
-/**
- * spi_nor_smpt_read_dummy() - return the configuration detection command read
- * latency, in clock cycles.
- * @nor: pointer to a 'struct spi_nor'
- * @settings: configuration detection command descriptor, dword1
- *
- * Return: the number of dummy cycles for an SMPT read
- */
-static u8 spi_nor_smpt_read_dummy(const struct spi_nor *nor, const u32 settings)
-{
- u8 read_dummy = SMPT_CMD_READ_DUMMY(settings);
-
- if (read_dummy == SMPT_CMD_READ_DUMMY_IS_VARIABLE)
- return nor->read_dummy;
- return read_dummy;
-}
-
-/**
- * spi_nor_get_map_in_use() - get the configuration map in use
- * @nor: pointer to a 'struct spi_nor'
- * @smpt: pointer to the sector map parameter table
- * @smpt_len: sector map parameter table length
- *
- * Return: pointer to the map in use, ERR_PTR(-errno) otherwise.
- */
-static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
- u8 smpt_len)
-{
- const u32 *ret;
- u8 *buf;
- u32 addr;
- int err;
- u8 i;
- u8 addr_width, read_opcode, read_dummy;
- u8 read_data_mask, map_id;
-
- /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
- buf = kmalloc(sizeof(*buf), GFP_KERNEL);
- if (!buf)
- return ERR_PTR(-ENOMEM);
-
- addr_width = nor->addr_width;
- read_dummy = nor->read_dummy;
- read_opcode = nor->read_opcode;
-
- map_id = 0;
- /* Determine if there are any optional Detection Command Descriptors */
- for (i = 0; i < smpt_len; i += 2) {
- if (smpt[i] & SMPT_DESC_TYPE_MAP)
- break;
-
- read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
- nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]);
- nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
- nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
- addr = smpt[i + 1];
-
- err = spi_nor_read_raw(nor, addr, 1, buf);
- if (err) {
- ret = ERR_PTR(err);
- goto out;
- }
-
- /*
- * Build an index value that is used to select the Sector Map
- * Configuration that is currently in use.
- */
- map_id = map_id << 1 | !!(*buf & read_data_mask);
- }
-
- /*
- * If command descriptors are provided, they always precede map
- * descriptors in the table. There is no need to start the iteration
- * over smpt array all over again.
- *
- * Find the matching configuration map.
- */
- ret = ERR_PTR(-EINVAL);
- while (i < smpt_len) {
- if (SMPT_MAP_ID(smpt[i]) == map_id) {
- ret = smpt + i;
- break;
- }
-
- /*
- * If there are no more configuration map descriptors and no
- * configuration ID matched the configuration identifier, the
- * sector address map is unknown.
- */
- if (smpt[i] & SMPT_DESC_END)
- break;
-
- /* increment the table index to the next map */
- i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1;
- }
-
- /* fall through */
-out:
- kfree(buf);
- nor->addr_width = addr_width;
- nor->read_dummy = read_dummy;
- nor->read_opcode = read_opcode;
- return ret;
-}
-
-/**
- * spi_nor_region_check_overlay() - set overlay bit when the region is overlaid
- * @region: pointer to a structure that describes a SPI NOR erase region
- * @erase: pointer to a structure that describes a SPI NOR erase type
- * @erase_type: erase type bitmask
- */
-static void
-spi_nor_region_check_overlay(struct spi_nor_erase_region *region,
- const struct spi_nor_erase_type *erase,
- const u8 erase_type)
-{
- int i;
-
- for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
- if (!(erase_type & BIT(i)))
- continue;
- if (region->size & erase[i].size_mask) {
- spi_nor_region_mark_overlay(region);
- return;
- }
- }
-}
-
-/**
- * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map
- * @nor: pointer to a 'struct spi_nor'
- * @params: pointer to a duplicate 'struct spi_nor_flash_parameter' that is
- * used for storing SFDP parsed data
- * @smpt: pointer to the sector map parameter table
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int
-spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
- struct spi_nor_flash_parameter *params,
- const u32 *smpt)
-{
- struct spi_nor_erase_map *map = ¶ms->erase_map;
- struct spi_nor_erase_type *erase = map->erase_type;
- struct spi_nor_erase_region *region;
- u64 offset;
- u32 region_count;
- int i, j;
- u8 uniform_erase_type, save_uniform_erase_type;
- u8 erase_type, regions_erase_type;
-
- region_count = SMPT_MAP_REGION_COUNT(*smpt);
- /*
- * The regions will be freed when the driver detaches from the
- * device.
- */
- region = devm_kcalloc(nor->dev, region_count, sizeof(*region),
- GFP_KERNEL);
- if (!region)
- return -ENOMEM;
- map->regions = region;
-
- uniform_erase_type = 0xff;
- regions_erase_type = 0;
- offset = 0;
- /* Populate regions. */
- for (i = 0; i < region_count; i++) {
- j = i + 1; /* index for the region dword */
- region[i].size = SMPT_MAP_REGION_SIZE(smpt[j]);
- erase_type = SMPT_MAP_REGION_ERASE_TYPE(smpt[j]);
- region[i].offset = offset | erase_type;
-
- spi_nor_region_check_overlay(®ion[i], erase, erase_type);
-
- /*
- * Save the erase types that are supported in all regions and
- * can erase the entire flash memory.
- */
- uniform_erase_type &= erase_type;
-
- /*
- * regions_erase_type mask will indicate all the erase types
- * supported in this configuration map.
- */
- regions_erase_type |= erase_type;
-
- offset = (region[i].offset & ~SNOR_ERASE_FLAGS_MASK) +
- region[i].size;
- }
-
- save_uniform_erase_type = map->uniform_erase_type;
- map->uniform_erase_type = spi_nor_sort_erase_mask(map,
- uniform_erase_type);
-
- if (!regions_erase_type) {
- /*
- * Roll back to the previous uniform_erase_type mask, SMPT is
- * broken.
- */
- map->uniform_erase_type = save_uniform_erase_type;
- return -EINVAL;
- }
-
- /*
- * BFPT advertises all the erase types supported by all the possible
- * map configurations. Mask out the erase types that are not supported
- * by the current map configuration.
- */
- for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
- if (!(regions_erase_type & BIT(erase[i].idx)))
- spi_nor_set_erase_type(&erase[i], 0, 0xFF);
-
- spi_nor_region_mark_end(®ion[i - 1]);
-
- return 0;
-}
-
-/**
- * spi_nor_parse_smpt() - parse Sector Map Parameter Table
- * @nor: pointer to a 'struct spi_nor'
- * @smpt_header: sector map parameter table header
- * @params: pointer to a duplicate 'struct spi_nor_flash_parameter'
- * that is used for storing SFDP parsed data
- *
- * This table is optional, but when available, we parse it to identify the
- * location and size of sectors within the main data array of the flash memory
- * device and to identify which Erase Types are supported by each sector.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_parse_smpt(struct spi_nor *nor,
- const struct sfdp_parameter_header *smpt_header,
- struct spi_nor_flash_parameter *params)
-{
- const u32 *sector_map;
- u32 *smpt;
- size_t len;
- u32 addr;
- int ret;
-
- /* Read the Sector Map Parameter Table. */
- len = smpt_header->length * sizeof(*smpt);
- smpt = kmalloc(len, GFP_KERNEL);
- if (!smpt)
- return -ENOMEM;
-
- addr = SFDP_PARAM_HEADER_PTP(smpt_header);
- ret = spi_nor_read_sfdp(nor, addr, len, smpt);
- if (ret)
- goto out;
-
- /* Fix endianness of the SMPT DWORDs. */
- le32_to_cpu_array(smpt, smpt_header->length);
-
- sector_map = spi_nor_get_map_in_use(nor, smpt, smpt_header->length);
- if (IS_ERR(sector_map)) {
- ret = PTR_ERR(sector_map);
- goto out;
- }
-
- ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map);
- if (ret)
- goto out;
-
- spi_nor_regions_sort_erase_types(¶ms->erase_map);
- /* fall through */
-out:
- kfree(smpt);
- return ret;
-}
-
-#define SFDP_4BAIT_DWORD_MAX 2
-
-struct sfdp_4bait {
- /* The hardware capability. */
- u32 hwcaps;
-
- /*
- * The <supported_bit> bit in DWORD1 of the 4BAIT tells us whether
- * the associated 4-byte address op code is supported.
- */
- u32 supported_bit;
-};
-
-/**
- * spi_nor_parse_4bait() - parse the 4-Byte Address Instruction Table
- * @nor: pointer to a 'struct spi_nor'.
- * @param_header: pointer to the 'struct sfdp_parameter_header' describing
- * the 4-Byte Address Instruction Table length and version.
- * @params: pointer to the 'struct spi_nor_flash_parameter' to be.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_parse_4bait(struct spi_nor *nor,
- const struct sfdp_parameter_header *param_header,
- struct spi_nor_flash_parameter *params)
-{
- static const struct sfdp_4bait reads[] = {
- { SNOR_HWCAPS_READ, BIT(0) },
- { SNOR_HWCAPS_READ_FAST, BIT(1) },
- { SNOR_HWCAPS_READ_1_1_2, BIT(2) },
- { SNOR_HWCAPS_READ_1_2_2, BIT(3) },
- { SNOR_HWCAPS_READ_1_1_4, BIT(4) },
- { SNOR_HWCAPS_READ_1_4_4, BIT(5) },
- { SNOR_HWCAPS_READ_1_1_1_DTR, BIT(13) },
- { SNOR_HWCAPS_READ_1_2_2_DTR, BIT(14) },
- { SNOR_HWCAPS_READ_1_4_4_DTR, BIT(15) },
- };
- static const struct sfdp_4bait programs[] = {
- { SNOR_HWCAPS_PP, BIT(6) },
- { SNOR_HWCAPS_PP_1_1_4, BIT(7) },
- { SNOR_HWCAPS_PP_1_4_4, BIT(8) },
- };
- static const struct sfdp_4bait erases[SNOR_ERASE_TYPE_MAX] = {
- { 0u /* not used */, BIT(9) },
- { 0u /* not used */, BIT(10) },
- { 0u /* not used */, BIT(11) },
- { 0u /* not used */, BIT(12) },
- };
- struct spi_nor_pp_command *params_pp = params->page_programs;
- struct spi_nor_erase_map *map = ¶ms->erase_map;
- struct spi_nor_erase_type *erase_type = map->erase_type;
- u32 *dwords;
- size_t len;
- u32 addr, discard_hwcaps, read_hwcaps, pp_hwcaps, erase_mask;
- int i, ret;
-
- if (param_header->major != SFDP_JESD216_MAJOR ||
- param_header->length < SFDP_4BAIT_DWORD_MAX)
- return -EINVAL;
-
- /* Read the 4-byte Address Instruction Table. */
- len = sizeof(*dwords) * SFDP_4BAIT_DWORD_MAX;
-
- /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
- dwords = kmalloc(len, GFP_KERNEL);
- if (!dwords)
- return -ENOMEM;
-
- addr = SFDP_PARAM_HEADER_PTP(param_header);
- ret = spi_nor_read_sfdp(nor, addr, len, dwords);
- if (ret)
- goto out;
-
- /* Fix endianness of the 4BAIT DWORDs. */
- le32_to_cpu_array(dwords, SFDP_4BAIT_DWORD_MAX);
-
- /*
- * Compute the subset of (Fast) Read commands for which the 4-byte
- * version is supported.
- */
- discard_hwcaps = 0;
- read_hwcaps = 0;
- for (i = 0; i < ARRAY_SIZE(reads); i++) {
- const struct sfdp_4bait *read = &reads[i];
-
- discard_hwcaps |= read->hwcaps;
- if ((params->hwcaps.mask & read->hwcaps) &&
- (dwords[0] & read->supported_bit))
- read_hwcaps |= read->hwcaps;
- }
-
- /*
- * Compute the subset of Page Program commands for which the 4-byte
- * version is supported.
- */
- pp_hwcaps = 0;
- for (i = 0; i < ARRAY_SIZE(programs); i++) {
- const struct sfdp_4bait *program = &programs[i];
-
- /*
- * The 4 Byte Address Instruction (Optional) Table is the only
- * SFDP table that indicates support for Page Program Commands.
- * Bypass the params->hwcaps.mask and consider 4BAIT the biggest
- * authority for specifying Page Program support.
- */
- discard_hwcaps |= program->hwcaps;
- if (dwords[0] & program->supported_bit)
- pp_hwcaps |= program->hwcaps;
- }
-
- /*
- * Compute the subset of Sector Erase commands for which the 4-byte
- * version is supported.
- */
- erase_mask = 0;
- for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
- const struct sfdp_4bait *erase = &erases[i];
-
- if (dwords[0] & erase->supported_bit)
- erase_mask |= BIT(i);
- }
-
- /* Replicate the sort done for the map's erase types in BFPT. */
- erase_mask = spi_nor_sort_erase_mask(map, erase_mask);
-
- /*
- * We need at least one 4-byte op code per read, program and erase
- * operation; the .read(), .write() and .erase() hooks share the
- * nor->addr_width value.
- */
- if (!read_hwcaps || !pp_hwcaps || !erase_mask)
- goto out;
-
- /*
- * Discard all operations from the 4-byte instruction set which are
- * not supported by this memory.
- */
- params->hwcaps.mask &= ~discard_hwcaps;
- params->hwcaps.mask |= (read_hwcaps | pp_hwcaps);
-
- /* Use the 4-byte address instruction set. */
- for (i = 0; i < SNOR_CMD_READ_MAX; i++) {
- struct spi_nor_read_command *read_cmd = ¶ms->reads[i];
-
- read_cmd->opcode = spi_nor_convert_3to4_read(read_cmd->opcode);
- }
-
- /* 4BAIT is the only SFDP table that indicates page program support. */
- if (pp_hwcaps & SNOR_HWCAPS_PP)
- spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP],
- SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1);
- if (pp_hwcaps & SNOR_HWCAPS_PP_1_1_4)
- spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_1_4],
- SPINOR_OP_PP_1_1_4_4B,
- SNOR_PROTO_1_1_4);
- if (pp_hwcaps & SNOR_HWCAPS_PP_1_4_4)
- spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_4_4],
- SPINOR_OP_PP_1_4_4_4B,
- SNOR_PROTO_1_4_4);
-
- for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
- if (erase_mask & BIT(i))
- erase_type[i].opcode = (dwords[1] >>
- erase_type[i].idx * 8) & 0xFF;
- else
- spi_nor_set_erase_type(&erase_type[i], 0u, 0xFF);
- }
-
- /*
- * We set SNOR_F_HAS_4BAIT in order to skip spi_nor_set_4byte_opcodes()
- * later because we already did the conversion to 4byte opcodes. Also,
- * this latest function implements a legacy quirk for the erase size of
- * Spansion memory. However this quirk is no longer needed with new
- * SFDP compliant memories.
- */
- nor->addr_width = 4;
- nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
-
- /* fall through */
-out:
- kfree(dwords);
- return ret;
-}
-
-/**
- * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
- * @nor: pointer to a 'struct spi_nor'
- * @params: pointer to the 'struct spi_nor_flash_parameter' to be
- * filled
- *
- * The Serial Flash Discoverable Parameters are described by the JEDEC JESD216
- * specification. This is a standard which tends to supported by almost all
- * (Q)SPI memory manufacturers. Those hard-coded tables allow us to learn at
- * runtime the main parameters needed to perform basic SPI flash operations such
- * as Fast Read, Page Program or Sector Erase commands.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_parse_sfdp(struct spi_nor *nor,
- struct spi_nor_flash_parameter *params)
-{
- const struct sfdp_parameter_header *param_header, *bfpt_header;
- struct sfdp_parameter_header *param_headers = NULL;
- struct sfdp_header header;
- struct device *dev = nor->dev;
- size_t psize;
- int i, err;
-
- /* Get the SFDP header. */
- err = spi_nor_read_sfdp_dma_unsafe(nor, 0, sizeof(header), &header);
- if (err < 0)
- return err;
-
- /* Check the SFDP header version. */
- if (le32_to_cpu(header.signature) != SFDP_SIGNATURE ||
- header.major != SFDP_JESD216_MAJOR)
- return -EINVAL;
-
- /*
- * Verify that the first and only mandatory parameter header is a
- * Basic Flash Parameter Table header as specified in JESD216.
- */
- bfpt_header = &header.bfpt_header;
- if (SFDP_PARAM_HEADER_ID(bfpt_header) != SFDP_BFPT_ID ||
- bfpt_header->major != SFDP_JESD216_MAJOR)
- return -EINVAL;
-
- /*
- * Allocate memory then read all parameter headers with a single
- * Read SFDP command. These parameter headers will actually be parsed
- * twice: a first time to get the latest revision of the basic flash
- * parameter table, then a second time to handle the supported optional
- * tables.
- * Hence we read the parameter headers once for all to reduce the
- * processing time. Also we use kmalloc() instead of devm_kmalloc()
- * because we don't need to keep these parameter headers: the allocated
- * memory is always released with kfree() before exiting this function.
- */
- if (header.nph) {
- psize = header.nph * sizeof(*param_headers);
-
- param_headers = kmalloc(psize, GFP_KERNEL);
- if (!param_headers)
- return -ENOMEM;
-
- err = spi_nor_read_sfdp(nor, sizeof(header),
- psize, param_headers);
- if (err < 0) {
- dev_dbg(dev, "failed to read SFDP parameter headers\n");
- goto exit;
- }
- }
-
- /*
- * Check other parameter headers to get the latest revision of
- * the basic flash parameter table.
- */
- for (i = 0; i < header.nph; i++) {
- param_header = ¶m_headers[i];
-
- if (SFDP_PARAM_HEADER_ID(param_header) == SFDP_BFPT_ID &&
- param_header->major == SFDP_JESD216_MAJOR &&
- (param_header->minor > bfpt_header->minor ||
- (param_header->minor == bfpt_header->minor &&
- param_header->length > bfpt_header->length)))
- bfpt_header = param_header;
- }
-
- err = spi_nor_parse_bfpt(nor, bfpt_header, params);
- if (err)
- goto exit;
-
- /* Parse optional parameter tables. */
- for (i = 0; i < header.nph; i++) {
- param_header = ¶m_headers[i];
-
- switch (SFDP_PARAM_HEADER_ID(param_header)) {
- case SFDP_SECTOR_MAP_ID:
- err = spi_nor_parse_smpt(nor, param_header, params);
- break;
-
- case SFDP_4BAIT_ID:
- err = spi_nor_parse_4bait(nor, param_header, params);
- break;
-
- default:
- break;
- }
-
- if (err) {
- dev_warn(dev, "Failed to parse optional parameter table: %04x\n",
- SFDP_PARAM_HEADER_ID(param_header));
- /*
- * Let's not drop all information we extracted so far
- * if optional table parsers fail. In case of failing,
- * each optional parser is responsible to roll back to
- * the previously known spi_nor data.
- */
- err = 0;
- }
- }
-
-exit:
- kfree(param_headers);
- return err;
-}
-
static int spi_nor_select_read(struct spi_nor *nor,
u32 shared_hwcaps)
{
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
new file mode 100644
index 000000000000..e1256fe50d12
--- /dev/null
+++ b/drivers/mtd/spi-nor/core.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#ifndef __LINUX_MTD_SPI_NOR_INTERNAL_H
+#define __LINUX_MTD_SPI_NOR_INTERNAL_H
+
+#include "sfdp.h"
+
+int spi_nor_sr1_bit6_quad_enable(struct spi_nor *nor);
+int spi_nor_sr2_bit1_quad_enable(struct spi_nor *nor);
+int spi_nor_sr2_bit7_quad_enable(struct spi_nor *nor);
+
+ssize_t spi_nor_read_data(struct spi_nor *nor, loff_t from, size_t len,
+ u8 *buf);
+
+int spi_nor_hwcaps_read2cmd(u32 hwcaps);
+u8 spi_nor_convert_3to4_read(u8 opcode);
+void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, u8 opcode,
+ enum spi_nor_protocol proto);
+
+void spi_nor_set_erase_type(struct spi_nor_erase_type *erase, u32 size,
+ u8 opcode);
+struct spi_nor_erase_region *
+spi_nor_region_next(struct spi_nor_erase_region *region);
+void spi_nor_init_uniform_erase_map(struct spi_nor_erase_map *map,
+ u8 erase_mask, u64 flash_size);
+
+int spi_nor_post_bfpt_fixups(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ const struct sfdp_bfpt *bfpt,
+ struct spi_nor_flash_parameter *params);
+
+#endif /* __LINUX_MTD_SPI_NOR_INTERNAL_H */
diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c
new file mode 100644
index 000000000000..b790c3ec871f
--- /dev/null
+++ b/drivers/mtd/spi-nor/sfdp.c
@@ -0,0 +1,1196 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/mtd/spi-nor.h>
+
+#include "core.h"
+
+#define SFDP_PARAM_HEADER_ID(p) (((p)->id_msb << 8) | (p)->id_lsb)
+#define SFDP_PARAM_HEADER_PTP(p) \
+ (((p)->parameter_table_pointer[2] << 16) | \
+ ((p)->parameter_table_pointer[1] << 8) | \
+ ((p)->parameter_table_pointer[0] << 0))
+
+#define SFDP_BFPT_ID 0xff00 /* Basic Flash Parameter Table */
+#define SFDP_SECTOR_MAP_ID 0xff81 /* Sector Map Table */
+#define SFDP_4BAIT_ID 0xff84 /* 4-byte Address Instruction Table */
+
+#define SFDP_SIGNATURE 0x50444653U
+#define SFDP_JESD216_MAJOR 1
+#define SFDP_JESD216_MINOR 0
+#define SFDP_JESD216A_MINOR 5
+#define SFDP_JESD216B_MINOR 6
+
+struct sfdp_header {
+ u32 signature; /* Ox50444653U <=> "SFDP" */
+ u8 minor;
+ u8 major;
+ u8 nph; /* 0-base number of parameter headers */
+ u8 unused;
+
+ /* Basic Flash Parameter Table. */
+ struct sfdp_parameter_header bfpt_header;
+};
+
+/* Fast Read settings. */
+struct sfdp_bfpt_read {
+ /* The Fast Read x-y-z hardware capability in params->hwcaps.mask. */
+ u32 hwcaps;
+
+ /*
+ * The <supported_bit> bit in <supported_dword> BFPT DWORD tells us
+ * whether the Fast Read x-y-z command is supported.
+ */
+ u32 supported_dword;
+ u32 supported_bit;
+
+ /*
+ * The half-word at offset <setting_shift> in <setting_dword> BFPT DWORD
+ * encodes the op code, the number of mode clocks and the number of wait
+ * states to be used by Fast Read x-y-z command.
+ */
+ u32 settings_dword;
+ u32 settings_shift;
+
+ /* The SPI protocol for this Fast Read x-y-z command. */
+ enum spi_nor_protocol proto;
+};
+
+struct sfdp_bfpt_erase {
+ /*
+ * The half-word at offset <shift> in DWORD <dwoard> encodes the
+ * op code and erase sector size to be used by Sector Erase commands.
+ */
+ u32 dword;
+ u32 shift;
+};
+
+#define SMPT_CMD_ADDRESS_LEN_MASK GENMASK(23, 22)
+#define SMPT_CMD_ADDRESS_LEN_0 (0x0UL << 22)
+#define SMPT_CMD_ADDRESS_LEN_3 (0x1UL << 22)
+#define SMPT_CMD_ADDRESS_LEN_4 (0x2UL << 22)
+#define SMPT_CMD_ADDRESS_LEN_USE_CURRENT (0x3UL << 22)
+
+#define SMPT_CMD_READ_DUMMY_MASK GENMASK(19, 16)
+#define SMPT_CMD_READ_DUMMY_SHIFT 16
+#define SMPT_CMD_READ_DUMMY(_cmd) \
+ (((_cmd) & SMPT_CMD_READ_DUMMY_MASK) >> SMPT_CMD_READ_DUMMY_SHIFT)
+#define SMPT_CMD_READ_DUMMY_IS_VARIABLE 0xfUL
+
+#define SMPT_CMD_READ_DATA_MASK GENMASK(31, 24)
+#define SMPT_CMD_READ_DATA_SHIFT 24
+#define SMPT_CMD_READ_DATA(_cmd) \
+ (((_cmd) & SMPT_CMD_READ_DATA_MASK) >> SMPT_CMD_READ_DATA_SHIFT)
+
+#define SMPT_CMD_OPCODE_MASK GENMASK(15, 8)
+#define SMPT_CMD_OPCODE_SHIFT 8
+#define SMPT_CMD_OPCODE(_cmd) \
+ (((_cmd) & SMPT_CMD_OPCODE_MASK) >> SMPT_CMD_OPCODE_SHIFT)
+
+#define SMPT_MAP_REGION_COUNT_MASK GENMASK(23, 16)
+#define SMPT_MAP_REGION_COUNT_SHIFT 16
+#define SMPT_MAP_REGION_COUNT(_header) \
+ ((((_header) & SMPT_MAP_REGION_COUNT_MASK) >> \
+ SMPT_MAP_REGION_COUNT_SHIFT) + 1)
+
+#define SMPT_MAP_ID_MASK GENMASK(15, 8)
+#define SMPT_MAP_ID_SHIFT 8
+#define SMPT_MAP_ID(_header) \
+ (((_header) & SMPT_MAP_ID_MASK) >> SMPT_MAP_ID_SHIFT)
+
+#define SMPT_MAP_REGION_SIZE_MASK GENMASK(31, 8)
+#define SMPT_MAP_REGION_SIZE_SHIFT 8
+#define SMPT_MAP_REGION_SIZE(_region) \
+ (((((_region) & SMPT_MAP_REGION_SIZE_MASK) >> \
+ SMPT_MAP_REGION_SIZE_SHIFT) + 1) * 256)
+
+#define SMPT_MAP_REGION_ERASE_TYPE_MASK GENMASK(3, 0)
+#define SMPT_MAP_REGION_ERASE_TYPE(_region) \
+ ((_region) & SMPT_MAP_REGION_ERASE_TYPE_MASK)
+
+#define SMPT_DESC_TYPE_MAP BIT(1)
+#define SMPT_DESC_END BIT(0)
+
+#define SFDP_4BAIT_DWORD_MAX 2
+
+struct sfdp_4bait {
+ /* The hardware capability. */
+ u32 hwcaps;
+
+ /*
+ * The <supported_bit> bit in DWORD1 of the 4BAIT tells us whether
+ * the associated 4-byte address op code is supported.
+ */
+ u32 supported_bit;
+};
+
+/**
+ * spi_nor_read_raw() - raw read of serial flash memory. read_opcode,
+ * addr_width and read_dummy members of the struct spi_nor
+ * should be previously
+ * set.
+ * @nor: pointer to a 'struct spi_nor'
+ * @addr: offset in the serial flash memory
+ * @len: number of bytes to read
+ * @buf: buffer where the data is copied into (dma-safe memory)
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_raw(struct spi_nor *nor, u32 addr, size_t len, u8 *buf)
+{
+ ssize_t ret;
+
+ while (len) {
+ ret = spi_nor_read_data(nor, addr, len, buf);
+ if (ret < 0)
+ return ret;
+ if (!ret || ret > len)
+ return -EIO;
+
+ buf += ret;
+ addr += ret;
+ len -= ret;
+ }
+ return 0;
+}
+
+/**
+ * spi_nor_read_sfdp() - read Serial Flash Discoverable Parameters.
+ * @nor: pointer to a 'struct spi_nor'
+ * @addr: offset in the SFDP area to start reading data from
+ * @len: number of bytes to read
+ * @buf: buffer where the SFDP data are copied into (dma-safe memory)
+ *
+ * Whatever the actual numbers of bytes for address and dummy cycles are
+ * for (Fast) Read commands, the Read SFDP (5Ah) instruction is always
+ * followed by a 3-byte address and 8 dummy clock cycles.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr,
+ size_t len, void *buf)
+{
+ u8 addr_width, read_opcode, read_dummy;
+ int ret;
+
+ read_opcode = nor->read_opcode;
+ addr_width = nor->addr_width;
+ read_dummy = nor->read_dummy;
+
+ nor->read_opcode = SPINOR_OP_RDSFDP;
+ nor->addr_width = 3;
+ nor->read_dummy = 8;
+
+ ret = spi_nor_read_raw(nor, addr, len, buf);
+
+ nor->read_opcode = read_opcode;
+ nor->addr_width = addr_width;
+ nor->read_dummy = read_dummy;
+
+ return ret;
+}
+
+/**
+ * spi_nor_read_sfdp_dma_unsafe() - read Serial Flash Discoverable Parameters.
+ * @nor: pointer to a 'struct spi_nor'
+ * @addr: offset in the SFDP area to start reading data from
+ * @len: number of bytes to read
+ * @buf: buffer where the SFDP data are copied into
+ *
+ * Wrap spi_nor_read_sfdp() using a kmalloc'ed bounce buffer as @buf is now not
+ * guaranteed to be dma-safe.
+ *
+ * Return: -ENOMEM if kmalloc() fails, the return code of spi_nor_read_sfdp()
+ * otherwise.
+ */
+static int spi_nor_read_sfdp_dma_unsafe(struct spi_nor *nor, u32 addr,
+ size_t len, void *buf)
+{
+ void *dma_safe_buf;
+ int ret;
+
+ dma_safe_buf = kmalloc(len, GFP_KERNEL);
+ if (!dma_safe_buf)
+ return -ENOMEM;
+
+ ret = spi_nor_read_sfdp(nor, addr, len, dma_safe_buf);
+ memcpy(buf, dma_safe_buf, len);
+ kfree(dma_safe_buf);
+
+ return ret;
+}
+
+static void
+spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read,
+ u16 half,
+ enum spi_nor_protocol proto)
+{
+ read->num_mode_clocks = (half >> 5) & 0x07;
+ read->num_wait_states = (half >> 0) & 0x1f;
+ read->opcode = (half >> 8) & 0xff;
+ read->proto = proto;
+}
+
+static const struct sfdp_bfpt_read sfdp_bfpt_reads[] = {
+ /* Fast Read 1-1-2 */
+ {
+ SNOR_HWCAPS_READ_1_1_2,
+ BFPT_DWORD(1), BIT(16), /* Supported bit */
+ BFPT_DWORD(4), 0, /* Settings */
+ SNOR_PROTO_1_1_2,
+ },
+
+ /* Fast Read 1-2-2 */
+ {
+ SNOR_HWCAPS_READ_1_2_2,
+ BFPT_DWORD(1), BIT(20), /* Supported bit */
+ BFPT_DWORD(4), 16, /* Settings */
+ SNOR_PROTO_1_2_2,
+ },
+
+ /* Fast Read 2-2-2 */
+ {
+ SNOR_HWCAPS_READ_2_2_2,
+ BFPT_DWORD(5), BIT(0), /* Supported bit */
+ BFPT_DWORD(6), 16, /* Settings */
+ SNOR_PROTO_2_2_2,
+ },
+
+ /* Fast Read 1-1-4 */
+ {
+ SNOR_HWCAPS_READ_1_1_4,
+ BFPT_DWORD(1), BIT(22), /* Supported bit */
+ BFPT_DWORD(3), 16, /* Settings */
+ SNOR_PROTO_1_1_4,
+ },
+
+ /* Fast Read 1-4-4 */
+ {
+ SNOR_HWCAPS_READ_1_4_4,
+ BFPT_DWORD(1), BIT(21), /* Supported bit */
+ BFPT_DWORD(3), 0, /* Settings */
+ SNOR_PROTO_1_4_4,
+ },
+
+ /* Fast Read 4-4-4 */
+ {
+ SNOR_HWCAPS_READ_4_4_4,
+ BFPT_DWORD(5), BIT(4), /* Supported bit */
+ BFPT_DWORD(7), 16, /* Settings */
+ SNOR_PROTO_4_4_4,
+ },
+};
+
+static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = {
+ /* Erase Type 1 in DWORD8 bits[15:0] */
+ {BFPT_DWORD(8), 0},
+
+ /* Erase Type 2 in DWORD8 bits[31:16] */
+ {BFPT_DWORD(8), 16},
+
+ /* Erase Type 3 in DWORD9 bits[15:0] */
+ {BFPT_DWORD(9), 0},
+
+ /* Erase Type 4 in DWORD9 bits[31:16] */
+ {BFPT_DWORD(9), 16},
+};
+
+/**
+ * spi_nor_set_erase_settings_from_bfpt() - set erase type settings from BFPT
+ * @erase: pointer to a structure that describes a SPI NOR erase type
+ * @size: the size of the sector/block erased by the erase type
+ * @opcode: the SPI command op code to erase the sector/block
+ * @i: erase type index as sorted in the Basic Flash Parameter Table
+ *
+ * The supported Erase Types will be sorted at init in ascending order, with
+ * the smallest Erase Type size being the first member in the erase_type array
+ * of the spi_nor_erase_map structure. Save the Erase Type index as sorted in
+ * the Basic Flash Parameter Table since it will be used later on to
+ * synchronize with the supported Erase Types defined in SFDP optional tables.
+ */
+static void
+spi_nor_set_erase_settings_from_bfpt(struct spi_nor_erase_type *erase,
+ u32 size, u8 opcode, u8 i)
+{
+ erase->idx = i;
+ spi_nor_set_erase_type(erase, size, opcode);
+}
+
+/**
+ * spi_nor_map_cmp_erase_type() - compare the map's erase types by size
+ * @l: member in the left half of the map's erase_type array
+ * @r: member in the right half of the map's erase_type array
+ *
+ * Comparison function used in the sort() call to sort in ascending order the
+ * map's erase types, the smallest erase type size being the first member in the
+ * sorted erase_type array.
+ *
+ * Return: the result of @l->size - @r->size
+ */
+static int spi_nor_map_cmp_erase_type(const void *l, const void *r)
+{
+ const struct spi_nor_erase_type *left = l, *right = r;
+
+ return left->size - right->size;
+}
+
+/**
+ * spi_nor_sort_erase_mask() - sort erase mask
+ * @map: the erase map of the SPI NOR
+ * @erase_mask: the erase type mask to be sorted
+ *
+ * Replicate the sort done for the map's erase types in BFPT: sort the erase
+ * mask in ascending order with the smallest erase type size starting from
+ * BIT(0) in the sorted erase mask.
+ *
+ * Return: sorted erase mask.
+ */
+static u8 spi_nor_sort_erase_mask(struct spi_nor_erase_map *map, u8 erase_mask)
+{
+ struct spi_nor_erase_type *erase_type = map->erase_type;
+ int i;
+ u8 sorted_erase_mask = 0;
+
+ if (!erase_mask)
+ return 0;
+
+ /* Replicate the sort done for the map's erase types. */
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+ if (erase_type[i].size && erase_mask & BIT(erase_type[i].idx))
+ sorted_erase_mask |= BIT(i);
+
+ return sorted_erase_mask;
+}
+
+/**
+ * spi_nor_regions_sort_erase_types() - sort erase types in each region
+ * @map: the erase map of the SPI NOR
+ *
+ * Function assumes that the erase types defined in the erase map are already
+ * sorted in ascending order, with the smallest erase type size being the first
+ * member in the erase_type array. It replicates the sort done for the map's
+ * erase types. Each region's erase bitmask will indicate which erase types are
+ * supported from the sorted erase types defined in the erase map.
+ * Sort the all region's erase type at init in order to speed up the process of
+ * finding the best erase command at runtime.
+ */
+static void spi_nor_regions_sort_erase_types(struct spi_nor_erase_map *map)
+{
+ struct spi_nor_erase_region *region = map->regions;
+ u8 region_erase_mask, sorted_erase_mask;
+
+ while (region) {
+ region_erase_mask = region->offset & SNOR_ERASE_TYPE_MASK;
+
+ sorted_erase_mask = spi_nor_sort_erase_mask(map,
+ region_erase_mask);
+
+ /* Overwrite erase mask. */
+ region->offset = (region->offset & ~SNOR_ERASE_TYPE_MASK) |
+ sorted_erase_mask;
+
+ region = spi_nor_region_next(region);
+ }
+}
+
+/**
+ * spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table.
+ * @nor: pointer to a 'struct spi_nor'
+ * @bfpt_header: pointer to the 'struct sfdp_parameter_header' describing
+ * the Basic Flash Parameter Table length and version
+ * @params: pointer to the 'struct spi_nor_flash_parameter' to be
+ * filled
+ *
+ * The Basic Flash Parameter Table is the main and only mandatory table as
+ * defined by the SFDP (JESD216) specification.
+ * It provides us with the total size (memory density) of the data array and
+ * the number of address bytes for Fast Read, Page Program and Sector Erase
+ * commands.
+ * For Fast READ commands, it also gives the number of mode clock cycles and
+ * wait states (regrouped in the number of dummy clock cycles) for each
+ * supported instruction op code.
+ * For Page Program, the page size is now available since JESD216 rev A, however
+ * the supported instruction op codes are still not provided.
+ * For Sector Erase commands, this table stores the supported instruction op
+ * codes and the associated sector sizes.
+ * Finally, the Quad Enable Requirements (QER) are also available since JESD216
+ * rev A. The QER bits encode the manufacturer dependent procedure to be
+ * executed to set the Quad Enable (QE) bit in some internal register of the
+ * Quad SPI memory. Indeed the QE bit, when it exists, must be set before
+ * sending any Quad SPI command to the memory. Actually, setting the QE bit
+ * tells the memory to reassign its WP# and HOLD#/RESET# pins to functions IO2
+ * and IO3 hence enabling 4 (Quad) I/O lines.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_bfpt(struct spi_nor *nor,
+ const struct sfdp_parameter_header *bfpt_header,
+ struct spi_nor_flash_parameter *params)
+{
+ struct spi_nor_erase_map *map = ¶ms->erase_map;
+ struct spi_nor_erase_type *erase_type = map->erase_type;
+ struct sfdp_bfpt bfpt;
+ size_t len;
+ int i, cmd, err;
+ u32 addr;
+ u16 half;
+ u8 erase_mask;
+
+ /* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */
+ if (bfpt_header->length < BFPT_DWORD_MAX_JESD216)
+ return -EINVAL;
+
+ /* Read the Basic Flash Parameter Table. */
+ len = min_t(size_t, sizeof(bfpt),
+ bfpt_header->length * sizeof(u32));
+ addr = SFDP_PARAM_HEADER_PTP(bfpt_header);
+ memset(&bfpt, 0, sizeof(bfpt));
+ err = spi_nor_read_sfdp_dma_unsafe(nor, addr, len, &bfpt);
+ if (err < 0)
+ return err;
+
+ /* Fix endianness of the BFPT DWORDs. */
+ le32_to_cpu_array(bfpt.dwords, BFPT_DWORD_MAX);
+
+ /* Number of address bytes. */
+ switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
+ case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
+ nor->addr_width = 3;
+ break;
+
+ case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
+ nor->addr_width = 4;
+ break;
+
+ default:
+ break;
+ }
+
+ /* Flash Memory Density (in bits). */
+ params->size = bfpt.dwords[BFPT_DWORD(2)];
+ if (params->size & BIT(31)) {
+ params->size &= ~BIT(31);
+
+ /*
+ * Prevent overflows on params->size. Anyway, a NOR of 2^64
+ * bits is unlikely to exist so this error probably means
+ * the BFPT we are reading is corrupted/wrong.
+ */
+ if (params->size > 63)
+ return -EINVAL;
+
+ params->size = 1ULL << params->size;
+ } else {
+ params->size++;
+ }
+ params->size >>= 3; /* Convert to bytes. */
+
+ /* Fast Read settings. */
+ for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_reads); i++) {
+ const struct sfdp_bfpt_read *rd = &sfdp_bfpt_reads[i];
+ struct spi_nor_read_command *read;
+
+ if (!(bfpt.dwords[rd->supported_dword] & rd->supported_bit)) {
+ params->hwcaps.mask &= ~rd->hwcaps;
+ continue;
+ }
+
+ params->hwcaps.mask |= rd->hwcaps;
+ cmd = spi_nor_hwcaps_read2cmd(rd->hwcaps);
+ read = ¶ms->reads[cmd];
+ half = bfpt.dwords[rd->settings_dword] >> rd->settings_shift;
+ spi_nor_set_read_settings_from_bfpt(read, half, rd->proto);
+ }
+
+ /*
+ * Sector Erase settings. Reinitialize the uniform erase map using the
+ * Erase Types defined in the bfpt table.
+ */
+ erase_mask = 0;
+ memset(¶ms->erase_map, 0, sizeof(params->erase_map));
+ for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
+ const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
+ u32 erasesize;
+ u8 opcode;
+
+ half = bfpt.dwords[er->dword] >> er->shift;
+ erasesize = half & 0xff;
+
+ /* erasesize == 0 means this Erase Type is not supported. */
+ if (!erasesize)
+ continue;
+
+ erasesize = 1U << erasesize;
+ opcode = (half >> 8) & 0xff;
+ erase_mask |= BIT(i);
+ spi_nor_set_erase_settings_from_bfpt(&erase_type[i], erasesize,
+ opcode, i);
+ }
+ spi_nor_init_uniform_erase_map(map, erase_mask, params->size);
+ /*
+ * Sort all the map's Erase Types in ascending order with the smallest
+ * erase size being the first member in the erase_type array.
+ */
+ sort(erase_type, SNOR_ERASE_TYPE_MAX, sizeof(erase_type[0]),
+ spi_nor_map_cmp_erase_type, NULL);
+ /*
+ * Sort the erase types in the uniform region in order to update the
+ * uniform_erase_type bitmask. The bitmask will be used later on when
+ * selecting the uniform erase.
+ */
+ spi_nor_regions_sort_erase_types(map);
+ map->uniform_erase_type = map->uniform_region.offset &
+ SNOR_ERASE_TYPE_MASK;
+
+ /* Stop here if not JESD216 rev A or later. */
+ if (bfpt_header->length < BFPT_DWORD_MAX)
+ return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt,
+ params);
+
+ /* Page size: this field specifies 'N' so the page size = 2^N bytes. */
+ params->page_size = bfpt.dwords[BFPT_DWORD(11)];
+ params->page_size &= BFPT_DWORD11_PAGE_SIZE_MASK;
+ params->page_size >>= BFPT_DWORD11_PAGE_SIZE_SHIFT;
+ params->page_size = 1U << params->page_size;
+
+ /* Quad Enable Requirements. */
+ switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) {
+ case BFPT_DWORD15_QER_NONE:
+ params->quad_enable = NULL;
+ break;
+
+ case BFPT_DWORD15_QER_SR2_BIT1_BUGGY:
+ /*
+ * Writing only one byte to the Status Register has the
+ * side-effect of clearing Status Register 2.
+ */
+ case BFPT_DWORD15_QER_SR2_BIT1_NO_RD:
+ /*
+ * Read Configuration Register (35h) instruction is not
+ * supported.
+ */
+ nor->flags |= SNOR_F_HAS_16BIT_SR | SNOR_F_NO_READ_CR;
+ params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+ break;
+
+ case BFPT_DWORD15_QER_SR1_BIT6:
+ nor->flags &= ~SNOR_F_HAS_16BIT_SR;
+ params->quad_enable = spi_nor_sr1_bit6_quad_enable;
+ break;
+
+ case BFPT_DWORD15_QER_SR2_BIT7:
+ nor->flags &= ~SNOR_F_HAS_16BIT_SR;
+ params->quad_enable = spi_nor_sr2_bit7_quad_enable;
+ break;
+
+ case BFPT_DWORD15_QER_SR2_BIT1:
+ /*
+ * JESD216 rev B or later does not specify if writing only one
+ * byte to the Status Register clears or not the Status
+ * Register 2, so let's be cautious and keep the default
+ * assumption of a 16-bit Write Status (01h) command.
+ */
+ nor->flags |= SNOR_F_HAS_16BIT_SR;
+
+ params->quad_enable = spi_nor_sr2_bit1_quad_enable;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return spi_nor_post_bfpt_fixups(nor, bfpt_header, &bfpt, params);
+}
+
+/**
+ * spi_nor_smpt_addr_width() - return the address width used in the
+ * configuration detection command.
+ * @nor: pointer to a 'struct spi_nor'
+ * @settings: configuration detection command descriptor, dword1
+ */
+static u8 spi_nor_smpt_addr_width(const struct spi_nor *nor, const u32 settings)
+{
+ switch (settings & SMPT_CMD_ADDRESS_LEN_MASK) {
+ case SMPT_CMD_ADDRESS_LEN_0:
+ return 0;
+ case SMPT_CMD_ADDRESS_LEN_3:
+ return 3;
+ case SMPT_CMD_ADDRESS_LEN_4:
+ return 4;
+ case SMPT_CMD_ADDRESS_LEN_USE_CURRENT:
+ /* fall through */
+ default:
+ return nor->addr_width;
+ }
+}
+
+/**
+ * spi_nor_smpt_read_dummy() - return the configuration detection command read
+ * latency, in clock cycles.
+ * @nor: pointer to a 'struct spi_nor'
+ * @settings: configuration detection command descriptor, dword1
+ *
+ * Return: the number of dummy cycles for an SMPT read
+ */
+static u8 spi_nor_smpt_read_dummy(const struct spi_nor *nor, const u32 settings)
+{
+ u8 read_dummy = SMPT_CMD_READ_DUMMY(settings);
+
+ if (read_dummy == SMPT_CMD_READ_DUMMY_IS_VARIABLE)
+ return nor->read_dummy;
+ return read_dummy;
+}
+
+/**
+ * spi_nor_get_map_in_use() - get the configuration map in use
+ * @nor: pointer to a 'struct spi_nor'
+ * @smpt: pointer to the sector map parameter table
+ * @smpt_len: sector map parameter table length
+ *
+ * Return: pointer to the map in use, ERR_PTR(-errno) otherwise.
+ */
+static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const u32 *smpt,
+ u8 smpt_len)
+{
+ const u32 *ret;
+ u8 *buf;
+ u32 addr;
+ int err;
+ u8 i;
+ u8 addr_width, read_opcode, read_dummy;
+ u8 read_data_mask, map_id;
+
+ /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
+ buf = kmalloc(sizeof(*buf), GFP_KERNEL);
+ if (!buf)
+ return ERR_PTR(-ENOMEM);
+
+ addr_width = nor->addr_width;
+ read_dummy = nor->read_dummy;
+ read_opcode = nor->read_opcode;
+
+ map_id = 0;
+ /* Determine if there are any optional Detection Command Descriptors */
+ for (i = 0; i < smpt_len; i += 2) {
+ if (smpt[i] & SMPT_DESC_TYPE_MAP)
+ break;
+
+ read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
+ nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]);
+ nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
+ nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
+ addr = smpt[i + 1];
+
+ err = spi_nor_read_raw(nor, addr, 1, buf);
+ if (err) {
+ ret = ERR_PTR(err);
+ goto out;
+ }
+
+ /*
+ * Build an index value that is used to select the Sector Map
+ * Configuration that is currently in use.
+ */
+ map_id = map_id << 1 | !!(*buf & read_data_mask);
+ }
+
+ /*
+ * If command descriptors are provided, they always precede map
+ * descriptors in the table. There is no need to start the iteration
+ * over smpt array all over again.
+ *
+ * Find the matching configuration map.
+ */
+ ret = ERR_PTR(-EINVAL);
+ while (i < smpt_len) {
+ if (SMPT_MAP_ID(smpt[i]) == map_id) {
+ ret = smpt + i;
+ break;
+ }
+
+ /*
+ * If there are no more configuration map descriptors and no
+ * configuration ID matched the configuration identifier, the
+ * sector address map is unknown.
+ */
+ if (smpt[i] & SMPT_DESC_END)
+ break;
+
+ /* increment the table index to the next map */
+ i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1;
+ }
+
+ /* fall through */
+out:
+ kfree(buf);
+ nor->addr_width = addr_width;
+ nor->read_dummy = read_dummy;
+ nor->read_opcode = read_opcode;
+ return ret;
+}
+
+/**
+ * spi_nor_region_check_overlay() - set overlay bit when the region is overlaid
+ * @region: pointer to a structure that describes a SPI NOR erase region
+ * @erase: pointer to a structure that describes a SPI NOR erase type
+ * @erase_type: erase type bitmask
+ */
+static void
+spi_nor_region_check_overlay(struct spi_nor_erase_region *region,
+ const struct spi_nor_erase_type *erase,
+ const u8 erase_type)
+{
+ int i;
+
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+ if (!(erase_type & BIT(i)))
+ continue;
+ if (region->size & erase[i].size_mask) {
+ spi_nor_region_mark_overlay(region);
+ return;
+ }
+ }
+}
+
+/**
+ * spi_nor_init_non_uniform_erase_map() - initialize the non-uniform erase map
+ * @nor: pointer to a 'struct spi_nor'
+ * @params: pointer to a duplicate 'struct spi_nor_flash_parameter' that is
+ * used for storing SFDP parsed data
+ * @smpt: pointer to the sector map parameter table
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int
+spi_nor_init_non_uniform_erase_map(struct spi_nor *nor,
+ struct spi_nor_flash_parameter *params,
+ const u32 *smpt)
+{
+ struct spi_nor_erase_map *map = ¶ms->erase_map;
+ struct spi_nor_erase_type *erase = map->erase_type;
+ struct spi_nor_erase_region *region;
+ u64 offset;
+ u32 region_count;
+ int i, j;
+ u8 uniform_erase_type, save_uniform_erase_type;
+ u8 erase_type, regions_erase_type;
+
+ region_count = SMPT_MAP_REGION_COUNT(*smpt);
+ /*
+ * The regions will be freed when the driver detaches from the
+ * device.
+ */
+ region = devm_kcalloc(nor->dev, region_count, sizeof(*region),
+ GFP_KERNEL);
+ if (!region)
+ return -ENOMEM;
+ map->regions = region;
+
+ uniform_erase_type = 0xff;
+ regions_erase_type = 0;
+ offset = 0;
+ /* Populate regions. */
+ for (i = 0; i < region_count; i++) {
+ j = i + 1; /* index for the region dword */
+ region[i].size = SMPT_MAP_REGION_SIZE(smpt[j]);
+ erase_type = SMPT_MAP_REGION_ERASE_TYPE(smpt[j]);
+ region[i].offset = offset | erase_type;
+
+ spi_nor_region_check_overlay(®ion[i], erase, erase_type);
+
+ /*
+ * Save the erase types that are supported in all regions and
+ * can erase the entire flash memory.
+ */
+ uniform_erase_type &= erase_type;
+
+ /*
+ * regions_erase_type mask will indicate all the erase types
+ * supported in this configuration map.
+ */
+ regions_erase_type |= erase_type;
+
+ offset = (region[i].offset & ~SNOR_ERASE_FLAGS_MASK) +
+ region[i].size;
+ }
+
+ save_uniform_erase_type = map->uniform_erase_type;
+ map->uniform_erase_type = spi_nor_sort_erase_mask(map,
+ uniform_erase_type);
+
+ if (!regions_erase_type) {
+ /*
+ * Roll back to the previous uniform_erase_type mask, SMPT is
+ * broken.
+ */
+ map->uniform_erase_type = save_uniform_erase_type;
+ return -EINVAL;
+ }
+
+ /*
+ * BFPT advertises all the erase types supported by all the possible
+ * map configurations. Mask out the erase types that are not supported
+ * by the current map configuration.
+ */
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++)
+ if (!(regions_erase_type & BIT(erase[i].idx)))
+ spi_nor_set_erase_type(&erase[i], 0, 0xFF);
+
+ spi_nor_region_mark_end(®ion[i - 1]);
+
+ return 0;
+}
+
+/**
+ * spi_nor_parse_smpt() - parse Sector Map Parameter Table
+ * @nor: pointer to a 'struct spi_nor'
+ * @smpt_header: sector map parameter table header
+ * @params: pointer to a duplicate 'struct spi_nor_flash_parameter'
+ * that is used for storing SFDP parsed data
+ *
+ * This table is optional, but when available, we parse it to identify the
+ * location and size of sectors within the main data array of the flash memory
+ * device and to identify which Erase Types are supported by each sector.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_smpt(struct spi_nor *nor,
+ const struct sfdp_parameter_header *smpt_header,
+ struct spi_nor_flash_parameter *params)
+{
+ const u32 *sector_map;
+ u32 *smpt;
+ size_t len;
+ u32 addr;
+ int ret;
+
+ /* Read the Sector Map Parameter Table. */
+ len = smpt_header->length * sizeof(*smpt);
+ smpt = kmalloc(len, GFP_KERNEL);
+ if (!smpt)
+ return -ENOMEM;
+
+ addr = SFDP_PARAM_HEADER_PTP(smpt_header);
+ ret = spi_nor_read_sfdp(nor, addr, len, smpt);
+ if (ret)
+ goto out;
+
+ /* Fix endianness of the SMPT DWORDs. */
+ le32_to_cpu_array(smpt, smpt_header->length);
+
+ sector_map = spi_nor_get_map_in_use(nor, smpt, smpt_header->length);
+ if (IS_ERR(sector_map)) {
+ ret = PTR_ERR(sector_map);
+ goto out;
+ }
+
+ ret = spi_nor_init_non_uniform_erase_map(nor, params, sector_map);
+ if (ret)
+ goto out;
+
+ spi_nor_regions_sort_erase_types(¶ms->erase_map);
+ /* fall through */
+out:
+ kfree(smpt);
+ return ret;
+}
+
+/**
+ * spi_nor_parse_4bait() - parse the 4-Byte Address Instruction Table
+ * @nor: pointer to a 'struct spi_nor'.
+ * @param_header: pointer to the 'struct sfdp_parameter_header' describing
+ * the 4-Byte Address Instruction Table length and version.
+ * @params: pointer to the 'struct spi_nor_flash_parameter' to be.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_parse_4bait(struct spi_nor *nor,
+ const struct sfdp_parameter_header *param_header,
+ struct spi_nor_flash_parameter *params)
+{
+ static const struct sfdp_4bait reads[] = {
+ { SNOR_HWCAPS_READ, BIT(0) },
+ { SNOR_HWCAPS_READ_FAST, BIT(1) },
+ { SNOR_HWCAPS_READ_1_1_2, BIT(2) },
+ { SNOR_HWCAPS_READ_1_2_2, BIT(3) },
+ { SNOR_HWCAPS_READ_1_1_4, BIT(4) },
+ { SNOR_HWCAPS_READ_1_4_4, BIT(5) },
+ { SNOR_HWCAPS_READ_1_1_1_DTR, BIT(13) },
+ { SNOR_HWCAPS_READ_1_2_2_DTR, BIT(14) },
+ { SNOR_HWCAPS_READ_1_4_4_DTR, BIT(15) },
+ };
+ static const struct sfdp_4bait programs[] = {
+ { SNOR_HWCAPS_PP, BIT(6) },
+ { SNOR_HWCAPS_PP_1_1_4, BIT(7) },
+ { SNOR_HWCAPS_PP_1_4_4, BIT(8) },
+ };
+ static const struct sfdp_4bait erases[SNOR_ERASE_TYPE_MAX] = {
+ { 0u /* not used */, BIT(9) },
+ { 0u /* not used */, BIT(10) },
+ { 0u /* not used */, BIT(11) },
+ { 0u /* not used */, BIT(12) },
+ };
+ struct spi_nor_pp_command *params_pp = params->page_programs;
+ struct spi_nor_erase_map *map = ¶ms->erase_map;
+ struct spi_nor_erase_type *erase_type = map->erase_type;
+ u32 *dwords;
+ size_t len;
+ u32 addr, discard_hwcaps, read_hwcaps, pp_hwcaps, erase_mask;
+ int i, ret;
+
+ if (param_header->major != SFDP_JESD216_MAJOR ||
+ param_header->length < SFDP_4BAIT_DWORD_MAX)
+ return -EINVAL;
+
+ /* Read the 4-byte Address Instruction Table. */
+ len = sizeof(*dwords) * SFDP_4BAIT_DWORD_MAX;
+
+ /* Use a kmalloc'ed bounce buffer to guarantee it is DMA-able. */
+ dwords = kmalloc(len, GFP_KERNEL);
+ if (!dwords)
+ return -ENOMEM;
+
+ addr = SFDP_PARAM_HEADER_PTP(param_header);
+ ret = spi_nor_read_sfdp(nor, addr, len, dwords);
+ if (ret)
+ goto out;
+
+ /* Fix endianness of the 4BAIT DWORDs. */
+ le32_to_cpu_array(dwords, SFDP_4BAIT_DWORD_MAX);
+
+ /*
+ * Compute the subset of (Fast) Read commands for which the 4-byte
+ * version is supported.
+ */
+ discard_hwcaps = 0;
+ read_hwcaps = 0;
+ for (i = 0; i < ARRAY_SIZE(reads); i++) {
+ const struct sfdp_4bait *read = &reads[i];
+
+ discard_hwcaps |= read->hwcaps;
+ if ((params->hwcaps.mask & read->hwcaps) &&
+ (dwords[0] & read->supported_bit))
+ read_hwcaps |= read->hwcaps;
+ }
+
+ /*
+ * Compute the subset of Page Program commands for which the 4-byte
+ * version is supported.
+ */
+ pp_hwcaps = 0;
+ for (i = 0; i < ARRAY_SIZE(programs); i++) {
+ const struct sfdp_4bait *program = &programs[i];
+
+ /*
+ * The 4 Byte Address Instruction (Optional) Table is the only
+ * SFDP table that indicates support for Page Program Commands.
+ * Bypass the params->hwcaps.mask and consider 4BAIT the biggest
+ * authority for specifying Page Program support.
+ */
+ discard_hwcaps |= program->hwcaps;
+ if (dwords[0] & program->supported_bit)
+ pp_hwcaps |= program->hwcaps;
+ }
+
+ /*
+ * Compute the subset of Sector Erase commands for which the 4-byte
+ * version is supported.
+ */
+ erase_mask = 0;
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+ const struct sfdp_4bait *erase = &erases[i];
+
+ if (dwords[0] & erase->supported_bit)
+ erase_mask |= BIT(i);
+ }
+
+ /* Replicate the sort done for the map's erase types in BFPT. */
+ erase_mask = spi_nor_sort_erase_mask(map, erase_mask);
+
+ /*
+ * We need at least one 4-byte op code per read, program and erase
+ * operation; the .read(), .write() and .erase() hooks share the
+ * nor->addr_width value.
+ */
+ if (!read_hwcaps || !pp_hwcaps || !erase_mask)
+ goto out;
+
+ /*
+ * Discard all operations from the 4-byte instruction set which are
+ * not supported by this memory.
+ */
+ params->hwcaps.mask &= ~discard_hwcaps;
+ params->hwcaps.mask |= (read_hwcaps | pp_hwcaps);
+
+ /* Use the 4-byte address instruction set. */
+ for (i = 0; i < SNOR_CMD_READ_MAX; i++) {
+ struct spi_nor_read_command *read_cmd = ¶ms->reads[i];
+
+ read_cmd->opcode = spi_nor_convert_3to4_read(read_cmd->opcode);
+ }
+
+ /* 4BAIT is the only SFDP table that indicates page program support. */
+ if (pp_hwcaps & SNOR_HWCAPS_PP)
+ spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP],
+ SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1);
+ if (pp_hwcaps & SNOR_HWCAPS_PP_1_1_4)
+ spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_1_4],
+ SPINOR_OP_PP_1_1_4_4B,
+ SNOR_PROTO_1_1_4);
+ if (pp_hwcaps & SNOR_HWCAPS_PP_1_4_4)
+ spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_4_4],
+ SPINOR_OP_PP_1_4_4_4B,
+ SNOR_PROTO_1_4_4);
+
+ for (i = 0; i < SNOR_ERASE_TYPE_MAX; i++) {
+ if (erase_mask & BIT(i))
+ erase_type[i].opcode = (dwords[1] >>
+ erase_type[i].idx * 8) & 0xFF;
+ else
+ spi_nor_set_erase_type(&erase_type[i], 0u, 0xFF);
+ }
+
+ /*
+ * We set SNOR_F_HAS_4BAIT in order to skip spi_nor_set_4byte_opcodes()
+ * later because we already did the conversion to 4byte opcodes. Also,
+ * this latest function implements a legacy quirk for the erase size of
+ * Spansion memory. However this quirk is no longer needed with new
+ * SFDP compliant memories.
+ */
+ nor->addr_width = 4;
+ nor->flags |= SNOR_F_4B_OPCODES | SNOR_F_HAS_4BAIT;
+
+ /* fall through */
+out:
+ kfree(dwords);
+ return ret;
+}
+
+/**
+ * spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
+ * @nor: pointer to a 'struct spi_nor'
+ * @params: pointer to the 'struct spi_nor_flash_parameter' to be
+ * filled
+ *
+ * The Serial Flash Discoverable Parameters are described by the JEDEC JESD216
+ * specification. This is a standard which tends to supported by almost all
+ * (Q)SPI memory manufacturers. Those hard-coded tables allow us to learn at
+ * runtime the main parameters needed to perform basic SPI flash operations such
+ * as Fast Read, Page Program or Sector Erase commands.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+int spi_nor_parse_sfdp(struct spi_nor *nor,
+ struct spi_nor_flash_parameter *params)
+{
+ const struct sfdp_parameter_header *param_header, *bfpt_header;
+ struct sfdp_parameter_header *param_headers = NULL;
+ struct sfdp_header header;
+ struct device *dev = nor->dev;
+ size_t psize;
+ int i, err;
+
+ /* Get the SFDP header. */
+ err = spi_nor_read_sfdp_dma_unsafe(nor, 0, sizeof(header), &header);
+ if (err < 0)
+ return err;
+
+ /* Check the SFDP header version. */
+ if (le32_to_cpu(header.signature) != SFDP_SIGNATURE ||
+ header.major != SFDP_JESD216_MAJOR)
+ return -EINVAL;
+
+ /*
+ * Verify that the first and only mandatory parameter header is a
+ * Basic Flash Parameter Table header as specified in JESD216.
+ */
+ bfpt_header = &header.bfpt_header;
+ if (SFDP_PARAM_HEADER_ID(bfpt_header) != SFDP_BFPT_ID ||
+ bfpt_header->major != SFDP_JESD216_MAJOR)
+ return -EINVAL;
+
+ /*
+ * Allocate memory then read all parameter headers with a single
+ * Read SFDP command. These parameter headers will actually be parsed
+ * twice: a first time to get the latest revision of the basic flash
+ * parameter table, then a second time to handle the supported optional
+ * tables.
+ * Hence we read the parameter headers once for all to reduce the
+ * processing time. Also we use kmalloc() instead of devm_kmalloc()
+ * because we don't need to keep these parameter headers: the allocated
+ * memory is always released with kfree() before exiting this function.
+ */
+ if (header.nph) {
+ psize = header.nph * sizeof(*param_headers);
+
+ param_headers = kmalloc(psize, GFP_KERNEL);
+ if (!param_headers)
+ return -ENOMEM;
+
+ err = spi_nor_read_sfdp(nor, sizeof(header),
+ psize, param_headers);
+ if (err < 0) {
+ dev_dbg(dev, "failed to read SFDP parameter headers\n");
+ goto exit;
+ }
+ }
+
+ /*
+ * Check other parameter headers to get the latest revision of
+ * the basic flash parameter table.
+ */
+ for (i = 0; i < header.nph; i++) {
+ param_header = ¶m_headers[i];
+
+ if (SFDP_PARAM_HEADER_ID(param_header) == SFDP_BFPT_ID &&
+ param_header->major == SFDP_JESD216_MAJOR &&
+ (param_header->minor > bfpt_header->minor ||
+ (param_header->minor == bfpt_header->minor &&
+ param_header->length > bfpt_header->length)))
+ bfpt_header = param_header;
+ }
+
+ err = spi_nor_parse_bfpt(nor, bfpt_header, params);
+ if (err)
+ goto exit;
+
+ /* Parse optional parameter tables. */
+ for (i = 0; i < header.nph; i++) {
+ param_header = ¶m_headers[i];
+
+ switch (SFDP_PARAM_HEADER_ID(param_header)) {
+ case SFDP_SECTOR_MAP_ID:
+ err = spi_nor_parse_smpt(nor, param_header, params);
+ break;
+
+ case SFDP_4BAIT_ID:
+ err = spi_nor_parse_4bait(nor, param_header, params);
+ break;
+
+ default:
+ break;
+ }
+
+ if (err) {
+ dev_warn(dev, "Failed to parse optional parameter table: %04x\n",
+ SFDP_PARAM_HEADER_ID(param_header));
+ /*
+ * Let's not drop all information we extracted so far
+ * if optional table parsers fail. In case of failing,
+ * each optional parser is responsible to roll back to
+ * the previously known spi_nor data.
+ */
+ err = 0;
+ }
+ }
+
+exit:
+ kfree(param_headers);
+ return err;
+}
+
diff --git a/drivers/mtd/spi-nor/sfdp.h b/drivers/mtd/spi-nor/sfdp.h
new file mode 100644
index 000000000000..e0a8ded04890
--- /dev/null
+++ b/drivers/mtd/spi-nor/sfdp.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2005, Intec Automation Inc.
+ * Copyright (C) 2014, Freescale Semiconductor, Inc.
+ */
+
+#ifndef __LINUX_MTD_SFDP_H
+#define __LINUX_MTD_SFDP_H
+
+/* Basic Flash Parameter Table */
+
+/*
+ * JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
+ * They are indexed from 1 but C arrays are indexed from 0.
+ */
+#define BFPT_DWORD(i) ((i) - 1)
+#define BFPT_DWORD_MAX 16
+
+struct sfdp_bfpt {
+ u32 dwords[BFPT_DWORD_MAX];
+};
+
+/* The first version of JESD216 defined only 9 DWORDs. */
+#define BFPT_DWORD_MAX_JESD216 9
+
+/* 1st DWORD. */
+#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16)
+#define BFPT_DWORD1_ADDRESS_BYTES_MASK GENMASK(18, 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY (0x0UL << 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 (0x1UL << 17)
+#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY (0x2UL << 17)
+#define BFPT_DWORD1_DTR BIT(19)
+#define BFPT_DWORD1_FAST_READ_1_2_2 BIT(20)
+#define BFPT_DWORD1_FAST_READ_1_4_4 BIT(21)
+#define BFPT_DWORD1_FAST_READ_1_1_4 BIT(22)
+
+/* 5th DWORD. */
+#define BFPT_DWORD5_FAST_READ_2_2_2 BIT(0)
+#define BFPT_DWORD5_FAST_READ_4_4_4 BIT(4)
+
+/* 11th DWORD. */
+#define BFPT_DWORD11_PAGE_SIZE_SHIFT 4
+#define BFPT_DWORD11_PAGE_SIZE_MASK GENMASK(7, 4)
+
+/* 15th DWORD. */
+
+/*
+ * (from JESD216 rev B)
+ * Quad Enable Requirements (QER):
+ * - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4
+ * reads based on instruction. DQ3/HOLD# functions are hold during
+ * instruction phase.
+ * - 001b: QE is bit 1 of status register 2. It is set via Write Status with
+ * two data bytes where bit 1 of the second byte is one.
+ * [...]
+ * Writing only one byte to the status register has the side-effect of
+ * clearing status register 2, including the QE bit. The 100b code is
+ * used if writing one byte to the status register does not modify
+ * status register 2.
+ * - 010b: QE is bit 6 of status register 1. It is set via Write Status with
+ * one data byte where bit 6 is one.
+ * [...]
+ * - 011b: QE is bit 7 of status register 2. It is set via Write status
+ * register 2 instruction 3Eh with one data byte where bit 7 is one.
+ * [...]
+ * The status register 2 is read using instruction 3Fh.
+ * - 100b: QE is bit 1 of status register 2. It is set via Write Status with
+ * two data bytes where bit 1 of the second byte is one.
+ * [...]
+ * In contrast to the 001b code, writing one byte to the status
+ * register does not modify status register 2.
+ * - 101b: QE is bit 1 of status register 2. Status register 1 is read using
+ * Read Status instruction 05h. Status register2 is read using
+ * instruction 35h. QE is set via Write Status instruction 01h with
+ * two data bytes where bit 1 of the second byte is one.
+ * [...]
+ */
+#define BFPT_DWORD15_QER_MASK GENMASK(22, 20)
+#define BFPT_DWORD15_QER_NONE (0x0UL << 20) /* Micron */
+#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY (0x1UL << 20)
+#define BFPT_DWORD15_QER_SR1_BIT6 (0x2UL << 20) /* Macronix */
+#define BFPT_DWORD15_QER_SR2_BIT7 (0x3UL << 20)
+#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20)
+#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */
+
+struct sfdp_parameter_header {
+ u8 id_lsb;
+ u8 minor;
+ u8 major;
+ u8 length; /* in double words */
+ u8 parameter_table_pointer[3]; /* byte address */
+ u8 id_msb;
+};
+
+int spi_nor_parse_sfdp(struct spi_nor *nor,
+ struct spi_nor_flash_parameter *params);
+
+#endif /* __LINUX_MTD_SFDP_H */
--
2.23.0