Re: [PATCH] cpufreq: ti-cpufreq: Add support for OPP_PLUS

[Tero Kristo]

On 02/03/2020 06:19, Viresh Kumar wrote:
> On 28-02-20, 16:45, Tero Kristo wrote:
> > From: Lokesh Vutla <lokeshvutla@xxxxxx>
> >
> > DRA762 SoC introduces OPP_PLUS which runs at 1.8GHz. Add
> > support for this OPP in ti-cpufreq driver.
> >
> > Acked-by: Dave Gerlach <d-gerlach@xxxxxx>
> > Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx>
> > Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
> > ---
> >   drivers/cpufreq/ti-cpufreq.c | 6 ++++++
> >   1 file changed, 6 insertions(+)
> >
> > diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
> > index 557cb513bf7f..d62b6b21325a 100644
> > --- a/drivers/cpufreq/ti-cpufreq.c
> > +++ b/drivers/cpufreq/ti-cpufreq.c
> > @@ -25,11 +25,14 @@
> >   
> >   #define DRA7_EFUSE_HAS_OD_MPU_OPP		11
> >   #define DRA7_EFUSE_HAS_HIGH_MPU_OPP		15
> > +#define DRA76_EFUSE_HAS_PLUS_MPU_OPP		18
> >   #define DRA7_EFUSE_HAS_ALL_MPU_OPP		2
> > +#define DRA76_EFUSE_HAS_ALL_MPU_OPP		24
> >   
> >   #define DRA7_EFUSE_NOM_MPU_OPP			BIT(0)
> >   #define DRA7_EFUSE_OD_MPU_OPP			BIT(1)
> >   #define DRA7_EFUSE_HIGH_MPU_OPP			BIT(2)
> > +#define DRA76_EFUSE_PLUS_MPU_OPP		BIT(3)
> >   
> >   #define OMAP3_CONTROL_DEVICE_STATUS		0x4800244C
> >   #define OMAP3_CONTROL_IDCODE			0x4830A204
> > @@ -80,6 +83,9 @@ static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data,
> >   	 */
> >   
> >   	switch (efuse) {
> > +	case DRA76_EFUSE_HAS_PLUS_MPU_OPP:
> > +	case DRA76_EFUSE_HAS_ALL_MPU_OPP:
> > +		calculated_efuse |= DRA76_EFUSE_PLUS_MPU_OPP;
> >   	case DRA7_EFUSE_HAS_ALL_MPU_OPP:
> >   	case DRA7_EFUSE_HAS_HIGH_MPU_OPP:
> >   		calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP;
>
> This is already merged, why sending it again ?

Oops sorry, seems I was looking at stale local upstream branch when 
checking what is still missing upstream. Please ignore.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki