Re: [PATCH 1/2] ARM: dts: remove g-use-dma from rockchip usb nodes

[Heiko Stuebner]

Am Freitag, 28. Februar 2020, 12:39:21 CET schrieb Johan Jonker:
> A test with the command below gives these errors:
> 
> arch/arm/boot/dts/rv1108-elgin-r1.dt.yaml: usb@30180000:
> 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
> arch/arm/boot/dts/rv1108-evb.dt.yaml: usb@30180000:
> 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
> arch/arm/boot/dts/rk3228-evb.dt.yaml: usb@30040000:
> 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
> arch/arm/boot/dts/rk3229-evb.dt.yaml: usb@30040000:
> 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
> arch/arm/boot/dts/rk3229-xms6.dt.yaml: usb@30040000:
> 'g-use-dma' does not match any of the regexes: 'pinctrl-[0-9]+'
> 
> 'g-use-dma' is not a valid option in dwc2.yaml, so remove it
> from all Rockchip dtsi files.
> 
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml
> 
> Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>

applied both patches for 5.7

Thanks
Heiko