Re: [PATCHv9 00/12] PCI: Recode Mobiveil driver and add PCIe Gen4 driver for NXP Layerscape SoCs
From: Russell King - ARM Linux admin
Date: Sat Feb 29 2020 - 08:33:04 EST
On Sat, Feb 29, 2020 at 12:08:28PM +0000, Russell King - ARM Linux admin wrote:
> On Sat, Feb 29, 2020 at 11:04:56AM +0000, Russell King - ARM Linux admin wrote:
> > On Sat, Feb 29, 2020 at 09:55:50AM +0000, Russell King - ARM Linux admin wrote:
> > > On Mon, Feb 10, 2020 at 03:22:57PM +0000, Russell King - ARM Linux admin wrote:
> > > > On Mon, Feb 10, 2020 at 04:12:30PM +0100, Olof Johansson wrote:
> > > > > On Thu, Feb 6, 2020 at 11:57 AM Z.q. Hou <zhiqiang.hou@xxxxxxx> wrote:
> > > > > >
> > > > > > Hi Olof,
> > > > > >
> > > > > > Thanks a lot for your comments!
> > > > > > And sorry for my delay respond!
> > > > >
> > > > > Actually, they apply with only minor conflicts on top of current -next.
> > > > >
> > > > > Bjorn, any chance we can get you to pick these up pretty soon? They
> > > > > enable full use of a promising ARM developer system, the SolidRun
> > > > > HoneyComb, and would be quite valuable for me and others to be able to
> > > > > use with mainline or -next without any additional patches applied --
> > > > > which this patchset achieves.
> > > > >
> > > > > I know there are pending revisions based on feedback. I'll leave it up
> > > > > to you and others to determine if that can be done with incremental
> > > > > patches on top, or if it should be fixed before the initial patchset
> > > > > is applied. But all in all, it's holding up adaption by me and surely
> > > > > others of a very interesting platform -- I'm looking to replace my
> > > > > aging MacchiatoBin with one of these and would need PCIe/NVMe to work
> > > > > before I do.
> > > >
> > > > If you're going to be using NVMe, make sure you use a power-fail safe
> > > > version; I've already had one instance where ext4 failed to mount
> > > > because of a corrupted journal using an XPG SX8200 after the Honeycomb
> > > > Serror'd, and then I powered it down after a few hours before later
> > > > booting it back up.
> > > >
> > > > EXT4-fs (nvme0n1p2): INFO: recovery required on readonly filesystem
> > > > EXT4-fs (nvme0n1p2): write access will be enabled during recovery
> > > > JBD2: journal transaction 80849 on nvme0n1p2-8 is corrupt.
> > > > EXT4-fs (nvme0n1p2): error loading journal
> > >
> > > ... and last night, I just got more ext4fs errors on the NVMe, without
> > > any unclean power cycles:
> > >
> > > [73729.556544] EXT4-fs error (device nvme0n1p2): ext4_lookup:1700: inode #917524: comm rm: iget: checksum invalid
> > > [73729.565354] Aborting journal on device nvme0n1p2-8.
> > > [73729.568995] EXT4-fs (nvme0n1p2): Remounting filesystem read-only
> > > [73729.569077] EXT4-fs error (device nvme0n1p2): ext4_journal_check_start:61: Detected aborted journal
> > > [73729.573741] EXT4-fs error (device nvme0n1p2): ext4_lookup:1700: inode #917524: comm rm: iget: checksum invalid
> > > [73729.593330] EXT4-fs error (device nvme0n1p2): ext4_lookup:1700: inode #917524: comm mv: iget: checksum invalid
> > >
> > > The affected file is /var/backups/dpkg.status.6.gz
> > >
> > > It was cleanly shut down and powered off on the 22nd February, booted
> > > yesterday morning followed by another reboot a few minutes later.
> > >
> > > What worries me is the fact that corruption has happened - and if that
> > > happens to a file rather than an inode, it will likely go unnoticed
> > > for a considerably longer time.
> > >
> > > I think I'm getting to the point of deciding NVMe or the LX2160A to be
> > > just too unreliable for serious use. I hadn't noticed any issues when
> > > using the rootfs on the eMMC, so it suggests either the NVMe is
> > > unreliable, or there's a problem with PCIe on this platform (which we
> > > kind of know about with Jon's GPU rendering issues.)
> >
> > Adding Ted and Andreas...
> >
> > Here's the debugfs -n "id" output for dpkg.status.5.gz (which is fine,
> > and probably a similar size):
> >
> > debugfs: id <917527>
> > 0000 a481 0000 30ff 0300 bd8e 475e bd77 4f5e ....0.....G^.wO^
> > 0020 29ca 345e 0000 0000 0000 0100 0002 0000 ).4^............
> > 0040 0000 0800 0100 0000 0af3 0100 0400 0000 ................
> > 0060 0000 0000 0000 0000 4000 0000 8087 3800 ........@.....8.
> > 0100 0000 0000 0000 0000 0000 0000 0000 0000 ................
> > *
> > 0140 0000 0000 c40b 4c0a 0000 0000 0000 0000 ......L.........
> > 0160 0000 0000 0000 0000 0000 0000 3884 0000 ............8...
> > 0200 2000 95f2 44b8 bdc9 a4d2 9883 c861 dc92 ...D........a..
> > 0220 bd31 4a5e ecc5 260c 0000 0000 0000 0000 .1J^..&.........
> > 0240 0000 0000 0000 0000 0000 0000 0000 0000 ................
> > *
> >
> > and for the affected inode:
> > debugfs: id <917524>
> > 0000 a481 0000 30ff 0300 3d3d 465e bd77 4f5e ....0...==F^.wO^
> > 0020 29ca 345e 0000 0000 0000 0100 0002 0000 ).4^............
> > 0040 0000 0800 0100 0000 0af3 0100 0400 0000 ................
> > 0060 0000 0000 0000 0000 4000 0000 c088 3800 ........@.....8.
> > 0100 0000 0000 0000 0000 0000 0000 0000 0000 ................
> > *
> > 0140 0000 0000 5fc4 cfb4 0000 0000 0000 0000 ...._...........
> > 0160 0000 0000 0000 0000 0000 0000 af23 0000 .............#..
> > 0200 2000 1cc3 ac95 c9c8 a4d2 9883 583e addf ...........X>..
> > 0220 3de0 485e b04d 7151 0000 0000 0000 0000 =.H^.MqQ........
> > 0240 0000 0000 0000 0000 0000 0000 0000 0000 ................
> > *
> >
> > and "stat" output:
> > debugfs: stat <917527>
> > Inode: 917527 Type: regular Mode: 0644 Flags: 0x80000
> > Generation: 172755908 Version: 0x00000000:00000001
> > User: 0 Group: 0 Project: 0 Size: 261936
> > File ACL: 0
> > Links: 1 Blockcount: 512
> > Fragment: Address: 0 Number: 0 Size: 0
> > ctime: 0x5e4f77bd:c9bdb844 -- Fri Feb 21 06:25:01 2020
> > atime: 0x5e478ebd:92dc61c8 -- Sat Feb 15 06:25:01 2020
> > mtime: 0x5e34ca29:8398d2a4 -- Sat Feb 1 00:45:29 2020
> > crtime: 0x5e4a31bd:0c26c5ec -- Mon Feb 17 06:25:01 2020
> > Size of extra inode fields: 32
> > Inode checksum: 0xf2958438
> > EXTENTS:
> > (0-63):3704704-3704767
> > debugfs: stat <917524>
> > Inode: 917524 Type: regular Mode: 0644 Flags: 0x80000
> > Generation: 3033515103 Version: 0x00000000:00000001
> > User: 0 Group: 0 Project: 0 Size: 261936
> > File ACL: 0
> > Links: 1 Blockcount: 512
> > Fragment: Address: 0 Number: 0 Size: 0
> > ctime: 0x5e4f77bd:c8c995ac -- Fri Feb 21 06:25:01 2020
> > atime: 0x5e463d3d:dfad3e58 -- Fri Feb 14 06:25:01 2020
> > mtime: 0x5e34ca29:8398d2a4 -- Sat Feb 1 00:45:29 2020
> > crtime: 0x5e48e03d:51714db0 -- Sun Feb 16 06:25:01 2020
> > Size of extra inode fields: 32
> > Inode checksum: 0xc31c23af
> > EXTENTS:
> > (0-63):3705024-3705087
> >
> > When using sif (set_inode_info) to re-set the UID to 0 on this (so
> > provoke the checksum to be updated):
> >
> > debugfs: id <917524>
> > 0000 a481 0000 30ff 0300 3d3d 465e bd77 4f5e ....0...==F^.wO^
> > 0020 29ca 345e 0000 0000 0000 0100 0002 0000 ).4^............
> > 0040 0000 0800 0100 0000 0af3 0100 0400 0000 ................
> > 0060 0000 0000 0000 0000 4000 0000 c088 3800 ........@.....8.
> > 0100 0000 0000 0000 0000 0000 0000 0000 0000 ................
> > *
> > 0140 0000 0000 5fc4 cfb4 0000 0000 0000 0000 ...._...........
> > 0160 0000 0000 0000 0000 0000 0000 b61f 0000 ................
> > ^^^^
> > 0200 2000 aa15 ac95 c9c8 a4d2 9883 583e addf ...........X>..
> > ^^^^
> > 0220 3de0 485e b04d 7151 0000 0000 0000 0000 =.H^.MqQ........
> > 0240 0000 0000 0000 0000 0000 0000 0000 0000 ................
> > *
> >
> > The values with "^^^^" are the checksum, which are the only values
> > that have changed here - the checksum is now 0x15aa1fb6 rather than
> > 0xc31c23af.
> >
> > With that changed, running e2fsck -n on the filesystem results in a
> > pass:
> >
> > root@cex7:~# e2fsck -n /dev/nvme0n1p2
> > e2fsck 1.44.5 (15-Dec-2018)
> > Warning: skipping journal recovery because doing a read-only filesystem check.
> > /dev/nvme0n1p2 contains a file system with errors, check forced.
> > Pass 1: Checking inodes, blocks, and sizes
> > Pass 2: Checking directory structure
> > Pass 3: Checking directory connectivity
> > Pass 4: Checking reference counts
> > Pass 5: Checking group summary information
> > /dev/nvme0n1p2: 121163/2097152 files (0.1% non-contiguous), 1349227/8388608 blocks
> >
> > and the file now appears to be intact (being a gzip file, gzip verifies
> > that the contents are now as it expects.)
> >
> > So, it looks like the _only_ issue is that the checksum on the inode
> > became invalid, which seems to suggest that it *isn't* a NVMe nor PCIe
> > issue.
> >
> > I wonder whether the journal would contain anything useful, but I don't
> > know how to use debugfs to find that out - while I can dump the journal,
> > I'd need to know which block contains the inode, and then work out where
> > in the journal that block was going to be written. If that would help,
> > let me know ASAP as I'll hold off rebooting the platform for a while
> > (which means the filesystem will remain as-is - and yes, I have the
> > debugfs file for e2undo to put stuff back.) Maybe it's possible to pull
> > the block number out of the e2undo file?
>
> Okay, the inode was stored in block 3670049, and the journal appears
> to contains no entries for that block.
>
> > tune2fs says:
> >
> > Checksum type: crc32c
> > Checksum: 0x682f91b9
> >
> > I guess this is what is used to checksum the inodes? If so, it's using
> > the kernel's crc32c-generic driver (according to /proc/crypto).
> >
> > Could it be a race condition, or some problem that's specific to the
> > ARM64 kernel that's provoking this corruption?
>
> Something else occurs to me:
>
> root@cex7:~# ls -li --time=ctime --full-time /var/backups/dpkg.status*
> 917622 -rw-r--r-- 1 root root 999052 2020-02-29 06:25:01.852231277 +0000 /var/backups/dpkg.status
> 917583 -rw-r--r-- 1 root root 999052 2020-02-21 06:25:01.958160960 +0000 /var/backups/dpkg.status.0
> 917520 -rw-r--r-- 1 root root 261936 2020-02-21 06:25:01.954161050 +0000 /var/backups/dpkg.status.1.gz
> 917531 -rw-r--r-- 1 root root 261936 2020-02-21 06:25:01.854163293 +0000 /var/backups/dpkg.status.2.gz
> 917532 -rw-r--r-- 1 root root 261936 2020-02-21 06:25:01.850163383 +0000 /var/backups/dpkg.status.3.gz
> 917509 -rw-r--r-- 1 root root 261936 2020-02-21 06:25:01.850163383 +0000 /var/backups/dpkg.status.4.gz
> 917527 -rw-r--r-- 1 root root 261936 2020-02-21 06:25:01.846163473 +0000 /var/backups/dpkg.status.5.gz
> 917524 -rw-r--r-- 1 root root 261936 2020-02-21 06:25:01.842163563 +0000 /var/backups/dpkg.status.6.gz
>
> So the last time that the kernel changed inode 917524 was on the 21th
> of February, probably when it was last renamed by logrotate, and like
> several other files stored in the same inode block. Yet, _only_ the
> checksum for 917524 was corrupted, the rest were fine.
>
> I would guess that logrotate behaves as follows:
> - remove /var/backups/dpkg.status.6.gz
> - rename /var/backups/dpkg.status.5.gz to /var/backups/dpkg.status.6.gz
> - repeat for other dpkg.status.*.gz files
> - gzip /var/backups/dpkg.status.0 to /var/backups/dpkg.status.1.gz
> - rename /var/backups/dpkg.status to /var/backups/dpkg.status.0
> - create new /var/backups/dpkg.status
>
> Looking at the inode block in the e2undo file, inode 917524 is at
> offset 0x300 into the block, which means the first inode in the
> block is 917521 and the last is 917536, which means we have several
> of the dpkg.status.* files that are stored in this inode block.
>
> That would've meant that the inode for /var/backups/dpkg.status.6.gz
> would have been updated just before the inode for
> /var/backups/dpkg.status.5.gz. I wonder if the inode block was
> written out somehow out of order, with the ctime for
> /var/backups/dpkg.status.6.gz having been updated but not the checksum
> as a result of the later changes - maybe as a result of having
> executed on a different CPU? That would suggest a weakness in the
> ARM64 locking implementation, coherency issues, or interconnect issues.
Looking at the errata configuration, I have:
# ARM errata workarounds via the alternatives framework
#
CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
CONFIG_ARM64_ERRATUM_826319=y
CONFIG_ARM64_ERRATUM_827319=y
CONFIG_ARM64_ERRATUM_824069=y
CONFIG_ARM64_ERRATUM_819472=y
CONFIG_ARM64_ERRATUM_832075=y
CONFIG_ARM64_ERRATUM_834220=y
CONFIG_ARM64_ERRATUM_845719=y
CONFIG_ARM64_ERRATUM_843419=y
CONFIG_ARM64_ERRATUM_1024718=y
CONFIG_ARM64_ERRATUM_1418040=y
CONFIG_ARM64_ERRATUM_1165522=y
CONFIG_ARM64_ERRATUM_1286807=y
CONFIG_ARM64_ERRATUM_1319367=y
CONFIG_ARM64_ERRATUM_1463225=y
# CONFIG_ARM64_ERRATUM_1542419 is not set
# CONFIG_CAVIUM_ERRATUM_22375 is not set
# CONFIG_CAVIUM_ERRATUM_23154 is not set
# CONFIG_CAVIUM_ERRATUM_27456 is not set
# CONFIG_CAVIUM_ERRATUM_30115 is not set
# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
CONFIG_QCOM_FALKOR_ERRATUM_1003=y
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
CONFIG_QCOM_FALKOR_ERRATUM_1009=y
CONFIG_QCOM_QDF2400_ERRATUM_0065=y
# CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set
# CONFIG_HISILICON_ERRATUM_161600802 is not set
CONFIG_QCOM_FALKOR_ERRATUM_E1041=y
# CONFIG_FUJITSU_ERRATUM_010001 is not set
# end of ARM errata workarounds via the alternatives framework
...
CONFIG_FSL_ERRATUM_A008585=y
CONFIG_HISILICON_ERRATUM_161010101=y
CONFIG_ARM64_ERRATUM_858921=y
so I don't think it's a missing errata kconfig setting, unless there's
an erratum that isn't in v5.5 that's necessary.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up