Re: [PATCH v3 12/13] soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api

[CK Hu]

Hi, Dennis:

On Fri, 2020-02-28 at 21:44 +0800, Dennis YC Hsieh wrote:
> Add clear parameter to let client decide if
> event should be clear to 0 after GCE receive it.
> 
> Signed-off-by: Dennis YC Hsieh <dennis-yc.hsieh@xxxxxxxxxxxx>
> ---
>  drivers/soc/mediatek/mtk-cmdq-helper.c   | 5 +++--
>  include/linux/mailbox/mtk-cmdq-mailbox.h | 3 +--
>  include/linux/soc/mediatek/mtk-cmdq.h    | 5 +++--
>  3 files changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index bbc68a7c81e9..406e1d34d234 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -295,15 +295,16 @@ int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
>  }
>  EXPORT_SYMBOL(cmdq_pkt_write_s_value);
>  
> -int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
> +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear)
>  {
>  	struct cmdq_instruction inst = { {0} };
> +	u32 clear_option = clear ? CMDQ_WFE_UPDATE : 0;
>  
>  	if (event >= CMDQ_MAX_EVENT)
>  		return -EINVAL;
>  
>  	inst.op = CMDQ_CODE_WFE;
> -	inst.value = CMDQ_WFE_OPTION;
> +	inst.value = CMDQ_WFE_OPTION | clear_option;
>  	inst.event = event;
>  
>  	return cmdq_pkt_append_command(pkt, inst);
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index 3f6bc0dfd5da..42d2a30e6a70 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -27,8 +27,7 @@
>   * bit 16-27: update value
>   * bit 31: 1 - update, 0 - no update
>   */
> -#define CMDQ_WFE_OPTION			(CMDQ_WFE_UPDATE | CMDQ_WFE_WAIT | \
> -					CMDQ_WFE_WAIT_VALUE)
> +#define CMDQ_WFE_OPTION			(CMDQ_WFE_WAIT | CMDQ_WFE_WAIT_VALUE)
>  
>  /** cmdq event maximum */
>  #define CMDQ_MAX_EVENT			0x3ff
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index 1a6c56f3bec1..d63749440697 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -152,11 +152,12 @@ int cmdq_pkt_write_s_value(struct cmdq_pkt *pkt, u16 high_addr_reg_idx,
>  /**
>   * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
>   * @pkt:	the CMDQ packet
> - * @event:	the desired event type to "wait and CLEAR"
> + * @event:	the desired event type to wait
> + * @clear:	clear event or not after event arrive
>   *
>   * Return: 0 for success; else the error code is returned
>   */
> -int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event);
> +int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event, bool clear);

I think you should modify client driver [1] as well in this patch.
Change it to

cmdq_pkt_wfe(cmdq_handle, mtk_crtc->cmdq_event, false);

[1]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/gpu/drm/mediatek/mtk_drm_crtc.c?h=v5.6-rc3#n491

Regards,
CK

>  
>  /**
>   * cmdq_pkt_clear_event() - append clear event command to the CMDQ packet