[PATCH 6/7] parport_pc: Convert DPRINTK to pr_debug

From: Joe Perches
Date: Fri Feb 28 2020 - 03:34:13 EST


Use a more common logging style.

Miscellanea:

o One message converted from KERN_INFO to KERN_DEBUG

Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/parport/parport_pc.c | 23 +++++++----------------
1 file changed, 7 insertions(+), 16 deletions(-)

diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index ab3b04f..aae03b 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -87,13 +87,6 @@

#undef DEBUG

-#ifdef DEBUG
-#define DPRINTK printk
-#else
-#define DPRINTK(stuff...)
-#endif
-
-
#define NR_SUPERIOS 3
static struct superio_struct { /* For Super-IO chips autodetection */
int io;
@@ -118,8 +111,8 @@ static void frob_econtrol(struct parport *pb, unsigned char m,
if (m != 0xff)
ectr = inb(ECONTROL(pb));

- DPRINTK(KERN_DEBUG "frob_econtrol(%02x,%02x): %02x -> %02x\n",
- m, v, ectr, (ectr & ~m) ^ v);
+ pr_debug("frob_econtrol(%02x,%02x): %02x -> %02x\n",
+ m, v, ectr, (ectr & ~m) ^ v);

outb((ectr & ~m) ^ v, ECONTROL(pb));
}
@@ -142,7 +135,7 @@ static int change_mode(struct parport *p, int m)
unsigned char oecr;
int mode;

- DPRINTK(KERN_INFO "parport change_mode ECP-ISA to mode 0x%02x\n", m);
+ pr_debug("parport change_mode ECP-ISA to mode 0x%02x\n", m);

if (!priv->ecr) {
printk(KERN_DEBUG "change_mode: but there's no ECR!\n");
@@ -2295,7 +2288,7 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
int irq;
int i;

- DPRINTK(KERN_DEBUG "sio_ite_8872_probe()\n");
+ pr_debug("sio_ite_8872_probe()\n");

/* make sure which one chip */
for (i = 0; i < 5; i++) {
@@ -2360,11 +2353,9 @@ static int sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, int autodma,
pci_write_config_dword(pdev, 0x9c,
ite8872set | (ite8872_irq * 0x11111));

- DPRINTK(KERN_DEBUG "ITE887x: The IRQ is %d.\n", ite8872_irq);
- DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O port is 0x%x.\n",
- ite8872_lpt);
- DPRINTK(KERN_DEBUG "ITE887x: The PARALLEL I/O porthi is 0x%x.\n",
- ite8872_lpthi);
+ pr_debug("ITE887x: The IRQ is %d\n", ite8872_irq);
+ pr_debug("ITE887x: The PARALLEL I/O port is 0x%x\n", ite8872_lpt);
+ pr_debug("ITE887x: The PARALLEL I/O porthi is 0x%x\n", ite8872_lpthi);

/* Let the user (or defaults) steer us away from interrupts */
irq = ite8872_irq;
--
2.24.0