[PATCH v3] arm64: dts: sc7180: Move venus node to the correct position

[Matthias Kaehlcke]

Per convention device nodes for SC7180 should be ordered by address.
This is currently not the case for the venus node, move it to the
correct position.

Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---

Changes in v3:
- actually insert the venus node after usb@a6f8800 and not just
  pretend to do it

Changes in v2:
- insert the venus node *after* the usb@a6f8800 node, not before

 arch/arm64/boot/dts/qcom/sc7180.dtsi | 52 ++++++++++++++--------------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 253274d5f04cb..31bf210f2e0b1 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1376,6 +1376,32 @@ usb_1_dwc3: dwc3@a600000 {
 			};
 		};
 
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sc7180-venus";
+			reg = <0 0x0aa00000 0 0xff000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&videocc VENUS_GDSC>,
+					<&videocc VCODEC0_GDSC>;
+			power-domain-names = "venus", "vcodec0";
+			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+			clock-names = "core", "iface", "bus",
+				      "vcodec0_core", "vcodec0_bus";
+			iommus = <&apps_smmu 0x0c00 0x60>;
+			memory-region = <&venus_mem>;
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+		};
+
 		videocc: clock-controller@ab00000 {
 			compatible = "qcom,sc7180-videocc";
 			reg = <0 0x0ab00000 0 0x10000>;
@@ -1538,32 +1564,6 @@ dispcc: clock-controller@af00000 {
 			#power-domain-cells = <1>;
 		};
 
-		venus: video-codec@aa00000 {
-			compatible = "qcom,sc7180-venus";
-			reg = <0 0x0aa00000 0 0xff000>;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&videocc VENUS_GDSC>,
-					<&videocc VCODEC0_GDSC>;
-			power-domain-names = "venus", "vcodec0";
-			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
-				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
-				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
-				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
-				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
-			clock-names = "core", "iface", "bus",
-				      "vcodec0_core", "vcodec0_bus";
-			iommus = <&apps_smmu 0x0c00 0x60>;
-			memory-region = <&venus_mem>;
-
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
-		};
-
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sc7180-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>;
-- 
2.25.1.481.gfbce0eb801-goog