[PATCH v2 2/6] net: bcmgenet: refactor phy mode configuration

[Jeremy Linton]

The DT phy mode is similar to what we want for ACPI
lets factor it out of the of path, and change the
of_ call to device_.

Signed-off-by: Jeremy Linton <jeremy.linton@xxxxxxx>
---
 drivers/net/ethernet/broadcom/genet/bcmmii.c | 42 ++++++++++++--------
 1 file changed, 26 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 6392a2530183..e7a1bf8ed36f 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -477,12 +477,33 @@ static int bcmgenet_mii_register(struct bcmgenet_priv *priv)
 	return ret;
 }
 
+static int bcmgenet_phy_interface_init(struct bcmgenet_priv *priv)
+{
+	struct device *kdev = &priv->pdev->dev;
+	int phy_mode = device_get_phy_mode(kdev);
+
+	if (phy_mode < 0) {
+		dev_err(kdev, "invalid PHY mode property\n");
+		return phy_mode;
+	}
+
+	priv->phy_interface = phy_mode;
+
+	/* We need to specifically look up whether this PHY interface is
+	 * internal or not *before* we even try to probe the PHY driver
+	 * over MDIO as we may have shut down the internal PHY for power
+	 * saving purposes.
+	 */
+	if (priv->phy_interface == PHY_INTERFACE_MODE_INTERNAL)
+		priv->internal_phy = true;
+
+	return 0;
+}
+
 static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv)
 {
 	struct device_node *dn = priv->pdev->dev.of_node;
-	struct device *kdev = &priv->pdev->dev;
 	struct phy_device *phydev;
-	phy_interface_t phy_mode;
 	int ret;
 
 	/* Fetch the PHY phandle */
@@ -500,23 +521,12 @@ static int bcmgenet_mii_of_init(struct bcmgenet_priv *priv)
 	}
 
 	/* Get the link mode */
-	ret = of_get_phy_mode(dn, &phy_mode);
-	if (ret) {
-		dev_err(kdev, "invalid PHY mode property\n");
+	ret = bcmgenet_phy_interface_init(priv);
+	if (ret)
 		return ret;
-	}
-
-	priv->phy_interface = phy_mode;
-
-	/* We need to specifically look up whether this PHY interface is internal
-	 * or not *before* we even try to probe the PHY driver over MDIO as we
-	 * may have shut down the internal PHY for power saving purposes.
-	 */
-	if (priv->phy_interface == PHY_INTERFACE_MODE_INTERNAL)
-		priv->internal_phy = true;
 
 	/* Make sure we initialize MoCA PHYs with a link down */
-	if (phy_mode == PHY_INTERFACE_MODE_MOCA) {
+	if (priv->phy_interface == PHY_INTERFACE_MODE_MOCA) {
 		phydev = of_phy_find_device(dn);
 		if (phydev) {
 			phydev->link = 0;
-- 
2.24.1