Re: [RFC PATCH v1 3/3] dt-bindings: thermal: Add yaml bindings for thermal zones

[Rob Herring]

On Mon, 24 Feb 2020 12:55:37 +0530, Amit Kucheria wrote:
> As part of moving the thermal bindings to YAML, split it up into 3
> bindings: thermal sensors, cooling devices and thermal zones.
> 
> The thermal-zone binding is a software abstraction to capture the
> properties of each zone - how often they should be checked, the
> temperature thresholds (trips) at which mitigation actions need to be
> taken and the level of mitigation needed at those thresholds.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> ---
>  .../bindings/thermal/thermal-zones.yaml       | 302 ++++++++++++++++++
>  1 file changed, 302 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/thermal-zones.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-zones.example.dt.yaml: thermal-sensor@c263000: interrupt-names: ['uplow'] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-zones.example.dt.yaml: thermal-sensor@c263000: interrupts: [[0, 506, 4]] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-zones.example.dt.yaml: thermal-sensor@c265000: interrupt-names: ['uplow'] is too short
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/thermal/thermal-zones.example.dt.yaml: thermal-sensor@c265000: interrupts: [[0, 507, 4]] is too short

See https://patchwork.ozlabs.org/patch/1242847
Please check and re-submit.