Re: [PATCH v2 5/7] bcm-vk: add bcm_vk UAPI
From: Greg Kroah-Hartman
Date: Thu Feb 20 2020 - 02:50:50 EST
On Wed, Feb 19, 2020 at 04:48:23PM -0800, Scott Branden wrote:
> Add user space api for bcm-vk driver.
>
> Signed-off-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
> ---
> include/uapi/linux/misc/bcm_vk.h | 117 +++++++++++++++++++++++++++++++
> 1 file changed, 117 insertions(+)
> create mode 100644 include/uapi/linux/misc/bcm_vk.h
>
> diff --git a/include/uapi/linux/misc/bcm_vk.h b/include/uapi/linux/misc/bcm_vk.h
> new file mode 100644
> index 000000000000..56a2178e06f5
> --- /dev/null
> +++ b/include/uapi/linux/misc/bcm_vk.h
> @@ -0,0 +1,117 @@
> +/* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) */
> +/*
> + * Copyright 2018-2020 Broadcom.
> + */
> +
> +#ifndef __UAPI_LINUX_MISC_BCM_VK_H
> +#define __UAPI_LINUX_MISC_BCM_VK_H
> +
> +#include <linux/ioctl.h>
> +#include <linux/types.h>
> +
> +struct vk_image {
> + __u32 type; /* Type of image */
> +#define VK_IMAGE_TYPE_BOOT1 1 /* 1st stage (load to SRAM) */
> +#define VK_IMAGE_TYPE_BOOT2 2 /* 2nd stage (load to DDR) */
> + char filename[64]; /* Filename of image */
__u8?
> +};
> +
> +/* default firmware images names */
> +#define VK_BOOT1_DEF_VALKYRIE_FILENAME "vk-boot1.bin"
> +#define VK_BOOT2_DEF_VALKYRIE_FILENAME "vk-boot2.bin"
> +
> +#define VK_BOOT1_DEF_VIPER_FILENAME "vp-boot1.bin"
> +#define VK_BOOT2_DEF_VIPER_FILENAME "vp-boot2.bin"
Why do these need to be in a uapi .h file? Shouldn't they just be part
of the normal MODULE_FIRMWARE() macro in the driver itself?
> +
> +struct vk_access {
> + __u8 barno; /* BAR number to use */
> + __u8 type; /* Type of access */
> +#define VK_ACCESS_READ 0
> +#define VK_ACCESS_WRITE 1
> + __u32 len; /* length of data */
Horrible padding issues, are you sure this all works properly?
> + __u64 offset; /* offset in BAR */
> + __u32 *data; /* where to read/write data to */
Are you _SURE_ you want a pointer here? How do you handle the compat
issues with 32/64 user/kernel space?
> +};
And isn't this just a normal PCI write thing? Can't you do it from
userspace using the existing userspace PCI accesses? Why do you need a
special ioctl for it?
> +
> +struct vk_reset {
> + __u32 arg1;
> + __u32 arg2;
> +};
> +
> +#define VK_MAGIC 0x5E
> +
> +/* Load image to Valkyrie */
> +#define VK_IOCTL_LOAD_IMAGE _IOW(VK_MAGIC, 0x2, struct vk_image)
> +
> +/* Read data from Valkyrie */
> +#define VK_IOCTL_ACCESS_BAR _IOWR(VK_MAGIC, 0x3, struct vk_access)
> +
> +/* Send Reset to Valkyrie */
> +#define VK_IOCTL_RESET _IOW(VK_MAGIC, 0x4, struct vk_reset)
> +
> +/*
> + * message block - basic unit in the message where a message's size is always
> + * N x sizeof(basic_block)
> + */
> +struct vk_msg_blk {
> + __u8 function_id;
> +#define VK_FID_TRANS_BUF 5
> +#define VK_FID_SHUTDOWN 8
> + __u8 size;
> + __u16 queue_id:4;
> + __u16 msg_id:12;
Do not use bitfields in ioctls, they will not work properly on all
systems. Use masks and shifts instead.
> + __u32 context_id;
> + __u32 args[2];
> +#define VK_CMD_PLANES_MASK 0x000F /* number of planes to up/download */
> +#define VK_CMD_UPLOAD 0x0400 /* memory transfer to vk */
> +#define VK_CMD_DOWNLOAD 0x0500 /* memory transfer from vk */
> +#define VK_CMD_MASK 0x0F00 /* command mask */
> +};
> +
> +#define VK_BAR_FWSTS 0x41C
> +/* VK_FWSTS definitions */
> +#define VK_FWSTS_RELOCATION_ENTRY BIT(0)
> +#define VK_FWSTS_RELOCATION_EXIT BIT(1)
> +#define VK_FWSTS_INIT_START BIT(2)
> +#define VK_FWSTS_ARCH_INIT_DONE BIT(3)
> +#define VK_FWSTS_PRE_KNL1_INIT_DONE BIT(4)
> +#define VK_FWSTS_PRE_KNL2_INIT_DONE BIT(5)
> +#define VK_FWSTS_POST_KNL_INIT_DONE BIT(6)
> +#define VK_FWSTS_INIT_DONE BIT(7)
> +#define VK_FWSTS_APP_INIT_START BIT(8)
> +#define VK_FWSTS_APP_INIT_DONE BIT(9)
I do not think that BIT() is exported to userspace properly, is it
really ok here?
> +#define VK_FWSTS_MASK 0xFFFFFFFF
> +#define VK_FWSTS_READY (VK_FWSTS_INIT_START | \
> + VK_FWSTS_ARCH_INIT_DONE | \
> + VK_FWSTS_PRE_KNL1_INIT_DONE | \
> + VK_FWSTS_PRE_KNL2_INIT_DONE | \
> + VK_FWSTS_POST_KNL_INIT_DONE | \
> + VK_FWSTS_INIT_DONE | \
> + VK_FWSTS_APP_INIT_START | \
> + VK_FWSTS_APP_INIT_DONE)
> +/* Deinit */
> +#define VK_FWSTS_APP_DEINIT_START BIT(23)
> +#define VK_FWSTS_APP_DEINIT_DONE BIT(24)
> +#define VK_FWSTS_DRV_DEINIT_START BIT(25)
> +#define VK_FWSTS_DRV_DEINIT_DONE BIT(26)
> +#define VK_FWSTS_RESET_DONE BIT(27)
> +#define VK_FWSTS_DEINIT_TRIGGERED (VK_FWSTS_APP_DEINIT_START | \
> + VK_FWSTS_APP_DEINIT_DONE | \
> + VK_FWSTS_DRV_DEINIT_START | \
> + VK_FWSTS_DRV_DEINIT_DONE)
> +/* Last nibble for reboot reason */
> +#define VK_FWSTS_RESET_REASON_SHIFT 28
> +#define VK_FWSTS_RESET_REASON_MASK (0xF << VK_FWSTS_RESET_REASON_SHIFT)
> +#define VK_FWSTS_RESET_SYS_PWRUP (0x0 << VK_FWSTS_RESET_REASON_SHIFT)
> +#define VK_FWSTS_RESET_MBOX_DB (0x1 << VK_FWSTS_RESET_REASON_SHIFT)
> +#define VK_FWSTS_RESET_M7_WDOG (0x2 << VK_FWSTS_RESET_REASON_SHIFT)
> +#define VK_FWSTS_RESET_TEMP (0x3 << VK_FWSTS_RESET_REASON_SHIFT)
> +#define VK_FWSTS_RESET_PCI_FLR (0x4 << VK_FWSTS_RESET_REASON_SHIFT)
> +#define VK_FWSTS_RESET_PCI_HOT (0x5 << VK_FWSTS_RESET_REASON_SHIFT)
> +#define VK_FWSTS_RESET_PCI_WARM (0x6 << VK_FWSTS_RESET_REASON_SHIFT)
> +#define VK_FWSTS_RESET_PCI_COLD (0x7 << VK_FWSTS_RESET_REASON_SHIFT)
> +#define VK_FWSTS_RESET_L1 (0x8 << VK_FWSTS_RESET_REASON_SHIFT)
> +#define VK_FWSTS_RESET_L0 (0x9 << VK_FWSTS_RESET_REASON_SHIFT)
> +#define VK_FWSTS_RESET_UNKNOWN (0xF << VK_FWSTS_RESET_REASON_SHIFT)
What are all of these #defines doing in an uapi file? How is userspace
going to use them?
thanks,
greg k-h