Re: [PATCH] RISC-V: Don't enable all interrupts in trap_init()

[Anup Patel]

On Wed, Feb 19, 2020 at 12:06 AM Palmer Dabbelt <palmer@xxxxxxxxxxx> wrote:
>
> On Sun, 02 Feb 2020 03:48:18 PST (-0800), atishp@xxxxxxxxxxxxxx wrote:
> > On Sun, Feb 2, 2020 at 3:06 AM Anup Patel <anup.patel@xxxxxxx> wrote:
> >>
> >> Historically, we have been enabling all interrupts for each
> >> HART in trap_init(). Ideally, we should only enable M-mode
> >> interrupts for M-mode kernel and S-mode interrupts for S-mode
> >> kernel in trap_init().
> >>
> >> Currently, we get suprious S-mode interrupts on Kendryte K210
> >> board running M-mode NO-MMU kernel because we are enabling all
> >> interrupts in trap_init(). To fix this, we only enable software
> >> and external interrupt in trap_init(). In future, trap_init()
> >> will only enable software interrupt and PLIC driver will enable
> >> external interrupt using CPU notifiers.
>
> I think we should add a proper interrupt controller driver for the per-hart
> interrupt controllers, as doing this within the other drivers is ugly -- for
> example, there's no reason an MMIO timer or interrupt controller driver should
> be toggling these bits.

I have always been in support of having per-hart interrupt controller driver.

I will rebase my RISC-V INTC driver upon latest kernel and send it again.
Of course, now the situation has changed the RISC-V INTC driver will
have to consider NOMMU kernel as well.

The last version of RISC-V INTC driver can be found in riscv_intc_v2
branch of https://github.com/avpatel/linux.git

>
> >> Cc: stable@xxxxxxxxxxxxxxx
> >> Fixes: 76d2a0493a17 ("RISC-V: Init and Halt Code)
>
> I'd argue this actually fixes the M-mode stuff, since that's the first place
> this issue shows up.  I've queued this with
>
> Fixes: a4c3733d32a7 ("riscv: abstract out CSR names for supervisor vs machine mode")
>
> instead, as that's the first commit that will actually write to MIE and
> therefor the first commit that will actually exhibit bad behavior.  It also has
> the advantage of making the patch apply on older trees, which should make life
> easier for the stable folks.

Sure, no problem.

>
> >> Signed-off-by: Anup Patel <anup.patel@xxxxxxx>
> >> ---
> >>  arch/riscv/kernel/traps.c | 4 ++--
> >>  1 file changed, 2 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
> >> index f4cad5163bf2..ffb3d94bf0cc 100644
> >> --- a/arch/riscv/kernel/traps.c
> >> +++ b/arch/riscv/kernel/traps.c
> >> @@ -156,6 +156,6 @@ void __init trap_init(void)
> >>         csr_write(CSR_SCRATCH, 0);
> >>         /* Set the exception vector address */
> >>         csr_write(CSR_TVEC, &handle_exception);
> >> -       /* Enable all interrupts */
> >> -       csr_write(CSR_IE, -1);
> >> +       /* Enable interrupts */
> >> +       csr_write(CSR_IE, IE_SIE | IE_EIE);
> >>  }
> >> --
> >> 2.17.1
> >>
> >>
> >
> > Looks good.
> > Reviewed-by: Atish Patra <atish.patra@xxxxxxx>
>
> Tested-by: Palmer Dabbelt <palmerdabbelt@xxxxxxxxxx> [QMEU virt machine with SMP]
> Reviewed-by: Palmer Dabbelt <palmerdabbelt@xxxxxxxxxx>
>
> I consider this a bugfix, so I'm targeting it for RCs.  It's on fixes and
> should go up this week.
>
> Thanks!

Thanks,
Anup