Re: [PATCH] usb: xhci-pci: Raspberry Pi FW loader for VIA VL805

[Nicolas Saenz Julienne]

On Mon, 2020-02-17 at 18:47 +0100, Stefan Wahren wrote:
> > +
> > +	dev_addr = pdev->bus->number << 20 | PCI_SLOT(pdev->devfn) << 15 |
> > +		   PCI_FUNC(pdev->devfn) << 12;
> > +
> > +	ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET,
> > +				    &dev_addr, sizeof(dev_addr));
> > +	if (ret)
> > +		return ret;
> not sure, but there could be a corner case which should be handled
> differently. In case the Raspberry Pi 4 has an EEPROM for the VL805
> firmware but the firmware is too old to handle
> RPI_FIRMWARE_NOTIFY_XHCI_RESET, we should return with 0. I don't know
> there is a change to detect this reliable. I just want to mention this.

Ouch, good point, that can be problematic. I'll test that scenario tomorrow.

> > diff --git a/include/soc/bcm2835/raspberrypi-firmware.h
> > b/include/soc/bcm2835/raspberrypi-firmware.h
> > index 7800e12ee042..cc9cdbc66403 100644
> > --- a/include/soc/bcm2835/raspberrypi-firmware.h
> > +++ b/include/soc/bcm2835/raspberrypi-firmware.h
> > @@ -90,7 +90,7 @@ enum rpi_firmware_property_tag {
> >  	RPI_FIRMWARE_SET_PERIPH_REG =                         0x00038045,
> >  	RPI_FIRMWARE_GET_POE_HAT_VAL =                        0x00030049,
> >  	RPI_FIRMWARE_SET_POE_HAT_VAL =                        0x00030050,
> > -
> > +	RPI_FIRMWARE_NOTIFY_XHCI_RESET =                      0x00030058,
> 
> In past we updated the firmware mailbox property interface in a bunch as
> a separate patch. So we can avoid those gaps.

Ok, I'll change that.

Regards,
Nicolas

Attachment: signature.asc
Description: This is a digitally signed message part