[PATCH v6 01/18] dt-bindings: phy: remove qcom-dwc3-usb-phy

From: Bryan O'Donoghue
Date: Mon Feb 10 2020 - 07:07:28 EST


From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>

This binding is not used by any driver.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@xxxxxxxxxx>
Cc: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@xxxxxxxxx>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
.../bindings/phy/qcom-dwc3-usb-phy.txt | 37 -------------------
1 file changed, 37 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt b/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
deleted file mode 100644
index a1697c27aecd..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
+++ /dev/null
@@ -1,37 +0,0 @@
-Qualcomm DWC3 HS AND SS PHY CONTROLLER
---------------------------------------
-
-DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
-controllers. Each DWC3 PHY controller should have its own node.
-
-Required properties:
-- compatible: should contain one of the following:
- - "qcom,dwc3-hs-usb-phy" for High Speed Synopsis PHY controller
- - "qcom,dwc3-ss-usb-phy" for Super Speed Synopsis PHY controller
-- reg: offset and length of the DWC3 PHY controller register set
-- #phy-cells: must be zero
-- clocks: a list of phandles and clock-specifier pairs, one for each entry in
- clock-names.
-- clock-names: Should contain "ref" for the PHY reference clock
-
-Optional clocks:
- "xo" External reference clock
-
-Example:
- phy@100f8800 {
- compatible = "qcom,dwc3-hs-usb-phy";
- reg = <0x100f8800 0x30>;
- clocks = <&gcc USB30_0_UTMI_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- };
-
- phy@100f8830 {
- compatible = "qcom,dwc3-ss-usb-phy";
- reg = <0x100f8830 0x30>;
- clocks = <&gcc USB30_0_MASTER_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- };
--
2.25.0