[PATCH v2 00/16] Add MHI bus support

From: Manivannan Sadhasivam
Date: Fri Jan 31 2020 - 08:50:22 EST


Hello,

This is the second attempt at adding the MHI (Modem Host Interface) bus
interface to Linux kernel. MHI is a communication protocol used by the
host processors to control and communicate with modems over a high
speed peripheral bus or shared memory. The MHI protocol has been
designed and developed by Qualcomm Innovation Center, Inc., for use
in their modems.

The first submission was made by Sujeev Dias of Qualcomm:

https://lkml.org/lkml/2018/4/26/1159
https://lkml.org/lkml/2018/7/9/987

This series addresses most of the review comments by Greg and Arnd for
the initial patchset. Furthermore, in order to ease the review process
I've splitted the patches logically and dropped few of them which were
not required for this initial submission.

Below is the high level changelog:

1. Removed all DT related code
2. Got rid of pci specific struct members from top level mhi structs
3. Moved device specific callbacks like ul_xfer() to driver struct. It
doesnât make sense to have callbacks in device struct as suggested by
Greg
4. Used priv data of `struct device` instead of own priv data in
`mhi_device` as suggested by Greg. This will allow us to use
dev_set{get}_drvdata() APIs in client drivers
5. Removed all debugfs related code
6. Changes to the APIs to look uniform
7. Converted the documentation to .rst and placed in its own subdirectory
8. Changes to the MHI device naming
9. Converted all uppercase variable names to appropriate lowercase ones
10. Removed custom debug code and used the dev_* ones where applicable
11. Dropped timesync, DTR, UCI, and Qcom controller related codes
12. Added QRTR client driver patch
13. Added modalias support for the MHI stack as well as client driver for
autoloading of modules (client drivers) by udev once the MHI devices
are created

This series includes the MHI stack as well as the QRTR client driver which
falls under the networking subsystem.

The reference controller implementation is here:
https://git.linaro.org/people/manivannan.sadhasivam/linux.git/tree/drivers/net/wireless/ath/ath11k/mhi.c?h=ath11k-qca6390-mhi
It will be submitted later along with ath11k patches.

Following developers deserve explicit acknowledgements for their
contributions to the MHI code:

Sujeev Dias
Siddartha Mohanadoss
Hemant Kumar
Jeff Hugo

Thanks,
Mani

Changes in v2:

* Added put_device to mhi_dealloc_device
* Removed unused members from struct mhi_controller
* Removed the atomicity of dev_wake in struct mhi_device as it is not required
* Reordered MHI structs to avoid holes
* Used struct device name for the controller device
* Marked the required and optional mhi_controller members for helping the
controller driver implementation
* Cleanups to the MHI doc
* Removed _relaxed variants and used readl/writel
* Added comments for MHI specific acronyms
* Removed the usage of bitfields and used bitmasks for mhi_event_ctxt and
mhi_chan_ctxt
* Used __64/__u32 types for structures representing hw states
* Added Hemant as a co-maintainer of MHI bus. He is from the MHI team of
Qualcomm and he will take up reviews and if possible, maintainership
in future.

Manivannan Sadhasivam (16):
docs: Add documentation for MHI bus
bus: mhi: core: Add support for registering MHI controllers
bus: mhi: core: Add support for registering MHI client drivers
bus: mhi: core: Add support for creating and destroying MHI devices
bus: mhi: core: Add support for ringing channel/event ring doorbells
bus: mhi: core: Add support for PM state transitions
bus: mhi: core: Add support for basic PM operations
bus: mhi: core: Add support for downloading firmware over BHIe
bus: mhi: core: Add support for downloading RDDM image during panic
bus: mhi: core: Add support for processing events from client device
bus: mhi: core: Add support for data transfer
bus: mhi: core: Add uevent support for module autoloading
MAINTAINERS: Add entry for MHI bus
net: qrtr: Add MHI transport layer
net: qrtr: Do not depend on ARCH_QCOM
soc: qcom: Do not depend on ARCH_QCOM for QMI helpers

Documentation/index.rst | 1 +
Documentation/mhi/index.rst | 18 +
Documentation/mhi/mhi.rst | 218 ++++
Documentation/mhi/topology.rst | 60 ++
MAINTAINERS | 10 +
drivers/bus/Kconfig | 1 +
drivers/bus/Makefile | 3 +
drivers/bus/mhi/Kconfig | 14 +
drivers/bus/mhi/Makefile | 2 +
drivers/bus/mhi/core/Makefile | 3 +
drivers/bus/mhi/core/boot.c | 508 ++++++++++
drivers/bus/mhi/core/init.c | 1301 ++++++++++++++++++++++++
drivers/bus/mhi/core/internal.h | 699 +++++++++++++
drivers/bus/mhi/core/main.c | 1576 +++++++++++++++++++++++++++++
drivers/bus/mhi/core/pm.c | 967 ++++++++++++++++++
drivers/soc/qcom/Kconfig | 1 -
include/linux/mhi.h | 661 ++++++++++++
include/linux/mod_devicetable.h | 13 +
net/qrtr/Kconfig | 8 +-
net/qrtr/Makefile | 2 +
net/qrtr/mhi.c | 207 ++++
scripts/mod/devicetable-offsets.c | 3 +
scripts/mod/file2alias.c | 10 +
23 files changed, 6284 insertions(+), 2 deletions(-)
create mode 100644 Documentation/mhi/index.rst
create mode 100644 Documentation/mhi/mhi.rst
create mode 100644 Documentation/mhi/topology.rst
create mode 100644 drivers/bus/mhi/Kconfig
create mode 100644 drivers/bus/mhi/Makefile
create mode 100644 drivers/bus/mhi/core/Makefile
create mode 100644 drivers/bus/mhi/core/boot.c
create mode 100644 drivers/bus/mhi/core/init.c
create mode 100644 drivers/bus/mhi/core/internal.h
create mode 100644 drivers/bus/mhi/core/main.c
create mode 100644 drivers/bus/mhi/core/pm.c
create mode 100644 include/linux/mhi.h
create mode 100644 net/qrtr/mhi.c

--
2.17.1