[PATCH 5/5] ARM: dts: stm32: add Fast Mode Plus info in I2C nodes of stm32mp151

[Alain Volmat]

Add the syscfg-fmp property in each i2c node in order to allow
Fast Mode Plus speed if clock-frequency >= 1MHz is indicated.

Signed-off-by: Alain Volmat <alain.volmat@xxxxxx>
---
 arch/arm/boot/dts/stm32mp151.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 2dbf32ca9b36..ecd0a932aa78 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -483,6 +483,7 @@
 			resets = <&rcc I2C1_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x1>;
 			wakeup-source;
 			status = "disabled";
 		};
@@ -497,6 +498,7 @@
 			resets = <&rcc I2C2_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x2>;
 			wakeup-source;
 			status = "disabled";
 		};
@@ -511,6 +513,7 @@
 			resets = <&rcc I2C3_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x4>;
 			wakeup-source;
 			status = "disabled";
 		};
@@ -525,6 +528,7 @@
 			resets = <&rcc I2C5_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x10>;
 			wakeup-source;
 			status = "disabled";
 		};
@@ -1477,6 +1481,7 @@
 			resets = <&rcc I2C4_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x8>;
 			wakeup-source;
 			status = "disabled";
 		};
@@ -1513,6 +1518,7 @@
 			resets = <&rcc I2C6_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x20>;
 			wakeup-source;
 			status = "disabled";
 		};
-- 
2.7.4