[PATCH 5.4 201/222] scsi: hisi_sas: Set the BIST init value before enabling BIST

[Greg Kroah-Hartman]

From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>

commit 65a3b8bd56942dc988b8c05615bd3f510a10012b upstream.

If set the BIST init value after enabling BIST, there may be still some few
error bits. According to the process, need to set the BIST init value
before enabling BIST.

Fixes: 97b151e75861 ("scsi: hisi_sas: Add BIST support for phy loopback")
Link: https://lore.kernel.org/r/1571926105-74636-3-git-send-email-john.garry@xxxxxxxxxx
Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -3022,11 +3022,6 @@ static int debugfs_set_bist_v3_hw(struct
 		hisi_sas_phy_write32(hisi_hba, phy_id,
 				     SAS_PHY_BIST_CTRL, reg_val);
 
-		mdelay(100);
-		reg_val |= (CFG_RX_BIST_EN_MSK | CFG_TX_BIST_EN_MSK);
-		hisi_sas_phy_write32(hisi_hba, phy_id,
-				     SAS_PHY_BIST_CTRL, reg_val);
-
 		/* set the bist init value */
 		hisi_sas_phy_write32(hisi_hba, phy_id,
 				     SAS_PHY_BIST_CODE,
@@ -3035,6 +3030,11 @@ static int debugfs_set_bist_v3_hw(struct
 				     SAS_PHY_BIST_CODE1,
 				     SAS_PHY_BIST_CODE1_INIT);
 
+		mdelay(100);
+		reg_val |= (CFG_RX_BIST_EN_MSK | CFG_TX_BIST_EN_MSK);
+		hisi_sas_phy_write32(hisi_hba, phy_id,
+				     SAS_PHY_BIST_CTRL, reg_val);
+
 		/* clear error bit */
 		mdelay(100);
 		hisi_sas_phy_read32(hisi_hba, phy_id, SAS_BIST_ERR_CNT);