[PATCH 5.4 039/222] iio: imu: st_lsm6dsx: Fix selection of ST_LSM6DS3_ID

[Greg Kroah-Hartman]

From: Stephan Gerhold <stephan@xxxxxxxxxxx>

commit fb4fbc8904e786537e29329d791147389e1465a2 upstream.

At the moment, attempting to probe a device with ST_LSM6DS3_ID
(e.g. using the st,lsm6ds3 compatible) fails with:

    st_lsm6dsx_i2c 1-006b: unsupported whoami [69]

... even though 0x69 is the whoami listed for ST_LSM6DS3_ID.

This happens because st_lsm6dsx_check_whoami() also attempts
to match unspecified (zero-initialized) entries in the "id" array.
ST_LSM6DS3_ID = 0 will therefore match any entry in
st_lsm6dsx_sensor_settings (here: the first), because none of them
actually have all 12 entries listed in the "id" array.

Avoid this by additionally checking if "name" is set,
which is only set for valid entries in the "id" array.

Note: Although the problem was introduced earlier it did not surface until
commit 52f4b1f19679 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1")
because ST_LSM6DS3_ID was the first entry in st_lsm6dsx_sensor_settings.

Fixes: d068e4a0f921 ("iio: imu: st_lsm6dsx: add support to multiple devices with the same settings")
Cc: <stable@xxxxxxxxxxxxxxx> # 5.4
Acked-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -911,7 +911,8 @@ static int st_lsm6dsx_check_whoami(struc
 
 	for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_sensor_settings); i++) {
 		for (j = 0; j < ST_LSM6DSX_MAX_ID; j++) {
-			if (id == st_lsm6dsx_sensor_settings[i].id[j].hw_id)
+			if (st_lsm6dsx_sensor_settings[i].id[j].name &&
+			    id == st_lsm6dsx_sensor_settings[i].id[j].hw_id)
 				break;
 		}
 		if (j < ST_LSM6DSX_MAX_ID)