Re: [PATCH v11 02/10] efi: Add embedded peripheral firmware support

[Hans de Goede]

Hi Andy,

On 17-01-2020 21:06, Andy Lutomirski wrote:
> > On Jan 14, 2020, at 4:25 AM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
> >
> > ïHi Andy,
>
> > Even if we get more use of this the chances of 1 device model using
> > more then 1 embedded fw are small. Where as if we first map the
> > EFI_BOOT_SERVICES_CODE segment before doing the DMI match then we
> > do this for all EFI_BOOT_SERVICES_CODE segments on all hardware.
> > The current implementation is very much optimized to do as little
> > work as possible when there is no DMI match, which will be true
> > on almost all devices out there.
>
> Fine with me.
>
>
> > If we hit firmware which is not 8 byte aligned, then yes that would be
> > a good idea, but for now I feel that that would just cause a slowdown
> > in the scanning without any benefits.
>
> It would shorten the code and remove a comment :). Also, a good memmem
> implementation should be very fast, potentially faster than your loop.
> I suspect the latter is only true in user code where SSE would get
> used, but still.
>
> it would also be unfortunate if some firmware update switches to
> 4-byte alignment and touchscreens stop working with no explanation.

So I was thinking sure, fine lets replace the loop with memmem,
but the kernel has no memmem, it has memscan but that takes an
int to search for, and reducing the prefix to an int seems likely
to cause more false positives and unnecessary sha256summing.

So I believe it is best to keep this as is for now, we can always
change the alignment requirement later, now that we use memcmp
to check the prefix changing it is just a matter of changing the
i += 8 to e.g. i += 4.

Regards,

Hans


> > > > +
> > > > +               sha256_init(&sctx);
> > > > +               sha256_update(&sctx, map + i, desc->length);
> > > > +               sha256_final(&sctx, sha256);
> > > > +               if (memcmp(sha256, desc->sha256, 32) == 0)
> > > > +                       break;
> > > > +       }
> > > > +       if ((i + desc->length) > size) {
> > > > +               memunmap(map);
> > > > +               return -ENOENT;
> > > > +       }
> > > > +
> > > > +       pr_info("Found EFI embedded fw '%s'\n", desc->name);
> > > > +
> > > It might be nice to also log which EFI section it was in?
> >
> > The EFI sections do not have names, so all I could is log
> > the section number which does not really feel useful?
> >
> > > > +       fw = kmalloc(sizeof(*fw), GFP_KERNEL);
> > > > +       if (!fw) {
> > > > +               memunmap(map);
> > > > +               return -ENOMEM;
> > > > +       }
> > > > +
> > > > +       fw->data = kmemdup(map + i, desc->length, GFP_KERNEL);
> > > > +       memunmap(map);
> > > > +       if (!fw->data) {
> > > > +               kfree(fw);
> > > > +               return -ENOMEM;
> > > > +       }
> > > > +
> > > > +       fw->name = desc->name;
> > > > +       fw->length = desc->length;
> > > > +       list_add(&fw->list, &efi_embedded_fw_list);
> > > > +
> > > If you actually copy the firmware name instead of just a pointer to
> > > it, then you could potentially free the list of EFI firmwares.
> >
> > If we move to having a separate dmi_system_id table for this then
> > that would be true. ATM the dmi_system_id from
> > drivers/platform/x86/touchscreen_dmi.c
> > is not freed as it is referenced from a bus-notifier.
> >
> > > Why are you copying the firmware into linear (kmemdup) memory here
> >
> > The kmemdup is because the EFI_BOOT_SERVICES_CODE section is
> > free-ed almost immediately after we run.
> >
> > > just to copy it to vmalloc space down below...
> >
> > The vmalloc is because the efi_get_embedded_fw() function is
> > a helper for later implementing firmware_Request_platform
> > which returns a struct firmware *fw and release_firmware()
> > uses vfree() to free the firmware contents.
> >
> > I guess we could have efi_get_embedded_fw() return an const u8 *
> > and have the firmware code do the vmalloc + memcpy but it boils
> > down to the same thing.
> >
> >
> > > > +       return 0;
> > > > +}
> > > > +
> > > > +void __init efi_check_for_embedded_firmwares(void)
> > > > +{
> > > > +       const struct efi_embedded_fw_desc *fw_desc;
> > > > +       const struct dmi_system_id *dmi_id;
> > > > +       efi_memory_desc_t *md;
> > > > +       int i, r;
> > > > +
> > > > +       for (i = 0; embedded_fw_table[i]; i++) {
> > > > +               dmi_id = dmi_first_match(embedded_fw_table[i]);
> > > > +               if (!dmi_id)
> > > > +                       continue;
> > > > +
> > > > +               fw_desc = dmi_id->driver_data;
> > > > +
> > > > +               /*
> > > > +                * In some drivers the struct driver_data contains may contain
> > > > +                * other driver specific data after the fw_desc struct; and
> > > > +                * the fw_desc struct itself may be empty, skip these.
> > > > +                */
> > > > +               if (!fw_desc->name)
> > > > +                       continue;
> > > > +
> > > > +               for_each_efi_memory_desc(md) {
> > > > +                       if (md->type != EFI_BOOT_SERVICES_CODE)
> > > > +                               continue;
> > > > +
> > > > +                       r = efi_check_md_for_embedded_firmware(md, fw_desc);
> > > > +                       if (r == 0)
> > > > +                               break;
> > > > +               }
> > > > +       }
> > > > +
> > > > +       checked_for_fw = true;
> > > > +}
> > > Have you measured how long this takes on a typical system per matching DMI id?
> >
> > I originally wrote this approx. 18 months ago, it has been on hold for a while
> > since it needed a sha256 method which would work before subsys_initcall-s
> > run so I couldn't use the standard crypto_alloc_shash() stuff. In the end
> > I ended up merging the duplicate purgatory and crypto/sha256_generic.c
> > generic C SHA256 implementation into a set of new directly callable lib
> > functions in lib/crypto/sha256.c, just so that I could move forward with
> > this...
> >
> > Anyways the reason for this background info is that because this is a while
> > ago I do not remember exactly how, but yes I did measure this (but not
> > very scientifically) and there was no discernible difference in boot
> > to init (from the initrd) with this in place vs without this.
> >
> > > > +
> > > > +int efi_get_embedded_fw(const char *name, void **data, size_t *size)
> > > > +{
> > > > +       struct efi_embedded_fw *iter, *fw = NULL;
> > > > +       void *buf = *data;
> > > > +
> > > > +       if (!checked_for_fw) {
> > > WARN_ON_ONCE?  A stack dump would be quite nice here.
> >
> > As discussed when this check was added (discussion in v7 of
> > the set I guess, check added in v8) we can also hit this without
> > it being a bug, e.g. when booted through kexec the whole
> > efi_check_for_embedded_firmwares() call we be skipped, hence the
> > pr_warn.
> >
> >
> > > > +       buf = vmalloc(fw->length);
> > > > +       if (!buf)
> > > > +               return -ENOMEM;
> > > > +
> > > > +       memcpy(buf, fw->data, fw->length);
> > > > +       *size = fw->length;
> > > > +       *data = buf;
> > > See above.  What's vmalloc() for?  Where's the vfree()?
> >
> > See above for my answer. I'm fine with moving this into the
> > firmware code, since that is where the matching vfree is, please
> > let me know how you want to proceed with this.
> >
> > > BTW, it would be very nice to have a straightforward way
> > > (/sys/kernel/debug/efi_firmware/[name]?) to dump all found firmwares.
> >
> > That is an interesting idea, we could add a subsys_init call or
> > some such to add this to debugfs (efi_check_for_embedded_firmwares runs
> > too early).
> >
> > But given how long this patch-set has been in the making I would really
> > like to get this (or at least the first 2 patches as a start) upstream,
> > so for now I would like to keep the changes to a minimum. Are you ok
> > with me adding the debugfs support with a follow-up patch ?
> >
> > Let me also reply to your summary comment elsewhere in the thread here:
> >
> > > Early in boot, you check a bunch of firmware descriptors, bundled with
> > > drivers, to search EFI code and data for firmware before you free said
> > > code and data.  You catalogue it by name.  Later on, you use this list
> > > as a fallback, again catalogued by name.  I think it would be rather
> > > nicer if you simply had a list in a single file containing all these
> > > descriptors rather than commingling it with the driver's internal dmi
> > > data.  This gets rid of all the ifdeffery and module issues.  It also
> > > avoids any potential nastiness when you have a dmi entry that contains
> > > driver_data that points into the driver when the driver is a module.
> > >
> > > And you can mark the entire list __initdata.  And you can easily (now
> > > or later on) invert the code flow so you map each EFI region exactly
> > > once and then search for all the firmware in it.
> >
> > I believe we have mostly discussed this above. At least for the
> > X86 touchscreen case, which is the only user of this for now, I
> > believe that re-using the table from drivers/platform/x86/touchscreen_dmi.c
> > is better as it avoids duplication of DMI strings and it keeps all
> > the info in one place (also avoiding churn in 2 files / 2 different
> > trees when new models are added).
> >
> > I agree that when looking at this as a generic mechanism which may be
> > used elsewhere, your suggestion makes a lot of sense. But even though
> > this is very much written so that it can be used as a generic mechanism
> > I'm not sure if other users will appear. So for now, with only the X86
> > touchscreen use-case actually using this I believe the current
> > implementation is best, but I'm definitely open to changing this around
> > if more users show up.
> >
> > Regards,
> >
> > Hans